rt2x00: Disable synchronization during initialization

As soon as init_registers() was called, the rt2400/rt2500
would start raising beacondone interrupts. Since this is highly
premature since no beacons were provided yet, we should
initialize the synchronization register to 0.

This will make all drivers initialize it to 0 regardless
if they are raising beacondone interrupts or not, since it only
makes sense to have it completely disabled.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 11 insertions, 0 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index a5ed54b69262..f7731fb82555 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -824,6 +824,17 @@ static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev)
         rt2x00_set_field32(&reg, CSR11_CW_SELECT, 0);
         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 
+        rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
+        rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
+        rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
+        rt2x00_set_field32(&reg, CSR14_TBCN, 0);
+        rt2x00_set_field32(&reg, CSR14_TCFP, 0);
+        rt2x00_set_field32(&reg, CSR14_TATIMW, 0);
+        rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
+        rt2x00_set_field32(&reg, CSR14_CFP_COUNT_PRELOAD, 0);
+        rt2x00_set_field32(&reg, CSR14_TBCM_PRELOAD, 0);
+        rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+
         rt2x00pci_register_write(rt2x00dev, CNT3, 0);
 
         rt2x00pci_register_read(rt2x00dev, TXCSR8, &reg);