mwifiex: add support to configure VHT for AP mode

Currently, default VHT configuration from the firmware is used
for the VHT operations. Adding vhtcfg command to configure the
firmware based on input received from cfg.

Enable VHT for AP mode only when cfg80211_ap_settings has a
VHT IE i.e., when ieee80211ac is set to 1 in the hostapd.conf.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 8 insertions, 0 deletions

diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h
index 91d522c746ed..7f27e45680b5 100644
--- a/drivers/net/wireless/mwifiex/ioctl.h
+++ b/drivers/net/wireless/mwifiex/ioctl.h
@@ -272,6 +272,14 @@ struct mwifiex_ds_pm_cfg {
         } param;
 };
 
+struct mwifiex_11ac_vht_cfg {
+        u8 band_config;
+        u8 misc_config;
+        u32 cap_info;
+        u32 mcs_tx_set;
+        u32 mcs_rx_set;
+};
+
 struct mwifiex_ds_11n_tx_cfg {
         u16 tx_htcap;
         u16 tx_htinfo;