iwlwifi: cleanup spectrum measurement command support

In iwlagn the support for spectrum measurement command has been
disabled since v2.6.29 without any requests for it. In addition to this
when this command is indeed enabled it has been found to trigger firmware
SYSASSERT on at least 4965 and 5100 hardware (see
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=1952 ). Since then
this code has been bitrotting and cannot just be enabled without porting.

Remove support for spectrum measurement command from iwlagn. It can be
added back if there is a future need and the firmware problem it triggers
has been fixed. Support for the spectrim measurement notification remains
as it has been enabled all the time.

In addition to this remove the 3945 spectrum measurement command Kconfig
option and make this command always supported. The code added by this
enabling is minimal and only run when user triggers a spectrum measurement
request via sysfs.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 18 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index ea309f42a78a..5df66382d922 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -512,6 +512,24 @@ void iwl_rx_missed_beacon_notif(struct iwl_priv *priv,
 }
 EXPORT_SYMBOL(iwl_rx_missed_beacon_notif);
 
+void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
+                                          struct iwl_rx_mem_buffer *rxb)
+{
+        struct iwl_rx_packet *pkt = rxb_addr(rxb);
+        struct iwl_spectrum_notification *report = &(pkt->u.spectrum_notif);
+
+        if (!report->state) {
+                IWL_DEBUG_11H(priv,
+                        "Spectrum Measure Notification: Start\n");
+                return;
+        }
+
+        memcpy(&priv->measure_report, report, sizeof(*report));
+        priv->measurement_status |= MEASUREMENT_READY;
+}
+EXPORT_SYMBOL(iwl_rx_spectrum_measure_notif);
+
+
 
 /* Calculate noise level, based on measurements during network silence just
  *   before arriving beacon.  This measurement can be done only if we know