ath5k: Fixes for PCI-E cards

 * Fix nic_wakeup for PCI-E chips (don't set AR5K_RESET_CTL_PCI bit)

 * Fix dma size setting for PCI-E chips (thanx to Bob Copeland).

Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 29 insertions, 10 deletions

diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index bd1513d1460b..b275b1f234a5 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -300,7 +300,8 @@ err:
  */
 static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 {
-        u32 turbo, mode, clock;
+        struct pci_dev *pdev = ah->ah_sc->pdev;
+        u32 turbo, mode, clock, bus_flags;
         int ret;
 
         turbo = 0;
@@ -377,9 +378,15 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
                                         AR5K_PHY_TURBO);
         }
 
-        /* ...reset chipset and PCI device */
-        if (ah->ah_single_chip == false && ath5k_hw_nic_reset(ah,
-                                AR5K_RESET_CTL_CHIP | AR5K_RESET_CTL_PCI)) {
+        /* reseting PCI on PCI-E cards results card to hang
+         * and always return 0xffff... so we ingore that flag
+         * for PCI-E cards */
+        bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+
+        /* Reset chipset */
+        ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+                AR5K_RESET_CTL_BASEBAND | bus_flags);
+        if (ret) {
                 ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip + PCI\n");
                 return -EIO;
         }
@@ -588,7 +595,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
         struct ieee80211_channel *channel, bool change_channel)
 {
         struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-        u32 data, s_seq, s_ant, s_led[3];
+        struct pci_dev *pdev = ah->ah_sc->pdev;
+        u32 data, s_seq, s_ant, s_led[3], dma_size;
         unsigned int i, mode, freq, ee_mode, ant[2];
         int ret;
 
@@ -900,13 +908,24 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 
         /*
          * Set Rx/Tx DMA Configuration
-         *(passing dma size not available on 5210)
+         *
+         * Set maximum DMA size (512) except for PCI-E cards since
+         * it causes rx overruns and tx errors (tested on 5424 but since
+         * rx overruns also occur on 5416/5418 with madwifi we set 128
+         * for all PCI-E cards to be safe).
+         *
+         * In dumps this is 128 for allchips.
+         *
+         * XXX: need to check 5210 for this
+         * TODO: Check out tx triger level, it's always 64 on dumps but I
+         * guess we can tweak it and see how it goes ;-)
          */
+        dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B;
         if (ah->ah_version != AR5K_AR5210) {
-                AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_SDMAMR,
-                                AR5K_DMASIZE_512B | AR5K_TXCFG_DMASIZE);
-                AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_SDMAMW,
-                                AR5K_DMASIZE_512B);
+                AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+                        AR5K_TXCFG_SDMAMR, dma_size);
+                AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
+                        AR5K_RXCFG_SDMAMW, dma_size);
         }
 
         /*