Move orinoco Kconfig entries into drivers/net/wireless/orinoco/Kconfig

Since driver now lives in separate subdirectory, move Kconfig entries
in own file so they can be tweaked indepndently. It complements
"orinoco: Move sources to a subdirectory".

Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru>
Acked-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 1 insertions, 121 deletions

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 2dddbd012a99..fe819a785714 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -194,127 +194,6 @@ config AIRO
 
           The driver can be compiled as a module and will be named "airo".
 
-config HERMES
-        tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
-        depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
-        select WIRELESS_EXT
-        select FW_LOADER
-        select CRYPTO
-        select CRYPTO_MICHAEL_MIC
-        ---help---
-          A driver for 802.11b wireless cards based on the "Hermes" or
-          Intersil HFA384x (Prism 2) MAC controller.  This includes the vast
-          majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
-          - except for the Cisco/Aironet cards.  Cards supported include the
-          Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
-          Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
-          IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
-          MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
-          IPW2011, and Symbol Spectrum24 High Rate amongst others.
-
-          This option includes the guts of the driver, but in order to
-          actually use a card you will also need to enable support for PCMCIA
-          Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
-
-          You will also very likely also need the Wireless Tools in order to
-          configure your card and that /etc/pcmcia/wireless.opts works :
-          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
-
-config HERMES_CACHE_FW_ON_INIT
-        bool "Cache Hermes firmware on driver initialisation"
-        depends on HERMES
-        default y
-        ---help---
-          Say Y to cache any firmware required by the Hermes drivers
-          on startup.  The firmware will remain cached until the
-          driver is unloaded.  The cache uses 64K of RAM.
-
-          Otherwise load the firmware from userspace as required.  In
-          this case the driver should be unloaded and restarted
-          whenever the firmware is changed.
-
-          If you are not sure, say Y.
-
-config APPLE_AIRPORT
-        tristate "Apple Airport support (built-in)"
-        depends on PPC_PMAC && HERMES
-        help
-          Say Y here to support the Airport 802.11b wireless Ethernet hardware
-          built into the Macintosh iBook and other recent PowerPC-based
-          Macintosh machines. This is essentially a Lucent Orinoco card with 
-          a non-standard interface.
-
-          This driver does not support the Airport Extreme (802.11b/g). Use
-          the BCM43xx driver for Airport Extreme cards.
-
-config PLX_HERMES
-        tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
-        depends on PCI && HERMES
-        help
-          Enable support for PCMCIA cards supported by the "Hermes" (aka
-          orinoco) driver when used in PLX9052 based PCI adaptors.  These
-          adaptors are not a full PCMCIA controller but act as a more limited
-          PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
-          802.11b PCMCIA cards can be used in desktop machines.  The Netgear
-          MA301 is such an adaptor.
-
-config TMD_HERMES
-        tristate "Hermes in TMD7160 based PCI adaptor support"
-        depends on PCI && HERMES
-        help
-          Enable support for PCMCIA cards supported by the "Hermes" (aka
-          orinoco) driver when used in TMD7160 based PCI adaptors.  These
-          adaptors are not a full PCMCIA controller but act as a more limited
-          PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
-          802.11b PCMCIA cards can be used in desktop machines.
-
-config NORTEL_HERMES
-        tristate "Nortel emobility PCI adaptor support"
-        depends on PCI && HERMES
-        help
-          Enable support for PCMCIA cards supported by the "Hermes" (aka
-          orinoco) driver when used in Nortel emobility PCI adaptors.  These
-          adaptors are not full PCMCIA controllers, but act as a more limited
-          PCI <-> PCMCIA bridge.
-
-config PCI_HERMES
-        tristate "Prism 2.5 PCI 802.11b adaptor support"
-        depends on PCI && HERMES
-        help
-          Enable support for PCI and mini-PCI 802.11b wireless NICs based on
-          the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b
-          PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
-          common.  Some of the built-in wireless adaptors in laptops are of
-          this variety.
-
-config PCMCIA_HERMES
-        tristate "Hermes PCMCIA card support"
-        depends on PCMCIA && HERMES
-        ---help---
-          A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
-          as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
-          EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
-          others).  It should also be usable on various Prism II based cards
-          such as the Linksys, D-Link and Farallon Skyline.  It should also
-          work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
-
-          You will very likely need the Wireless Tools in order to
-          configure your card and that /etc/pcmcia/wireless.opts works:
-          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-
-config PCMCIA_SPECTRUM
-        tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
-        depends on PCMCIA && HERMES
-        ---help---
-
-          This is a driver for 802.11b cards using RAM-loadable Symbol
-          firmware, such as Symbol Wireless Networker LA4100, CompactFlash
-          cards by Socket Communications and Intel PRO/Wireless 2011B.
-
-          This driver requires firmware download on startup.  Utilities
-          for downloading Symbol firmware are available at
-          <http://sourceforge.net/projects/orinoco/>
-
 config ATMEL
       tristate "Atmel at76c50x chipset  802.11b support"
       depends on (PCI || PCMCIA) && WLAN_80211
@@ -596,5 +475,6 @@ source "drivers/net/wireless/b43/Kconfig"
 source "drivers/net/wireless/b43legacy/Kconfig"
 source "drivers/net/wireless/zd1211rw/Kconfig"
 source "drivers/net/wireless/rt2x00/Kconfig"
+source "drivers/net/wireless/orinoco/Kconfig"
 
 endmenu