Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 365 insertions, 0 deletions

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
new file mode 100644
index 000000000000..0aaa12c0c098
--- /dev/null
+++ b/drivers/net/wireless/Kconfig
@@ -0,0 +1,365 @@
+#
+# Wireless LAN device configuration
+#
+
+menu "Wireless LAN (non-hamradio)"
+        depends on NETDEVICES
+
+config NET_RADIO
+        bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
+        ---help---
+          Support for wireless LANs and everything having to do with radio,
+          but not with amateur radio or FM broadcasting.
+
+          Saying Y here also enables the Wireless Extensions (creates
+          /proc/net/wireless and enables iwconfig access). The Wireless
+          Extension is a generic API allowing a driver to expose to the user
+          space configuration and statistics specific to common Wireless LANs.
+          The beauty of it is that a single set of tool can support all the
+          variations of Wireless LANs, regardless of their type (as long as
+          the driver supports Wireless Extension). Another advantage is that
+          these parameters may be changed on the fly without restarting the
+          driver (or Linux). If you wish to use Wireless Extensions with
+          wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
+          the tools from
+          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+          Some user-level drivers for scarab devices which don't require
+          special kernel support are available from
+          <ftp://shadow.cabi.net/pub/Linux/>.
+
+# Note : the cards are obsolete (can't buy them anymore), but the drivers
+# are not, as people are still using them...
+comment "Obsolete Wireless cards support (pre-802.11)"
+        depends on NET_RADIO && (INET || ISA || PCMCIA)
+
+config STRIP
+        tristate "STRIP (Metricom starmode radio IP)"
+        depends on NET_RADIO && INET
+        ---help---
+          Say Y if you have a Metricom radio and intend to use Starmode Radio
+          IP. STRIP is a radio protocol developed for the MosquitoNet project
+          (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
+          traffic using Metricom radios.  Metricom radios are small, battery
+          powered, 100kbit/sec packet radio transceivers, about the size and
+          weight of a cellular telephone. (You may also have heard them called
+          "Metricom modems" but we avoid the term "modem" because it misleads
+          many people into thinking that you can plug a Metricom modem into a
+          phone line and use it as a modem.)
+
+          You can use STRIP on any Linux machine with a serial port, although
+          it is obviously most useful for people with laptop computers. If you
+          think you might get a Metricom radio in the future, there is no harm
+          in saying Y to STRIP now, except that it makes the kernel a bit
+          bigger.
+
+          To compile this as a module, choose M here: the module will be
+          called strip.
+
+config ARLAN
+        tristate "Aironet Arlan 655 & IC2200 DS support"
+        depends on NET_RADIO && ISA && !64BIT
+        ---help---
+          Aironet makes Arlan, a class of wireless LAN adapters. These use the
+          www.Telxon.com chip, which is also used on several similar cards.
+          This driver is tested on the 655 and IC2200 series cards. Look at
+          <http://www.ylenurme.ee/~elmer/655/> for the latest information.
+
+          The driver is built as two modules, arlan and arlan-proc. The latter
+          is the /proc interface and is not needed most of time.
+
+          On some computers the card ends up in non-valid state after some
+          time. Use a ping-reset script to clear it.
+
+config WAVELAN
+        tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
+        depends on NET_RADIO && ISA
+        ---help---
+          The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
+          a Radio LAN (wireless Ethernet-like Local Area Network) using the
+          radio frequencies 900 MHz and 2.4 GHz.
+
+          This driver support the ISA version of the WaveLAN card.  A separate
+          driver for the PCMCIA (PC-card) hardware is available in David
+          Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+          for location).
+
+          If you want to use an ISA WaveLAN card under Linux, say Y and read
+          the Ethernet-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>. Some more specific
+          information is contained in
+          <file:Documentation/networking/wavelan.txt> and in the source code
+          <file:drivers/net/wavelan.p.h>.
+
+          You will also need the wireless tools package available from
+          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+          Please read the man pages contained therein.
+
+          To compile this driver as a module, choose M here: the module will be
+          called wavelan.
+
+config PCMCIA_WAVELAN
+        tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
+        depends on NET_RADIO && PCMCIA
+        help
+          Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
+          (PC-card) wireless Ethernet networking card to your computer.  This
+          driver is for the non-IEEE-802.11 Wavelan cards.
+
+          To compile this driver as a module, choose M here: the module will be
+          called wavelan_cs.  If unsure, say N.
+
+config PCMCIA_NETWAVE
+        tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
+        depends on NET_RADIO && PCMCIA
+        help
+          Say Y here if you intend to attach this type of PCMCIA (PC-card)
+          wireless Ethernet networking card to your computer.
+
+          To compile this driver as a module, choose M here: the module will be
+          called netwave_cs.  If unsure, say N.
+
+comment "Wireless 802.11 Frequency Hopping cards support"
+        depends on NET_RADIO && PCMCIA
+
+config PCMCIA_RAYCS
+        tristate "Aviator/Raytheon 2.4MHz wireless support"
+        depends on NET_RADIO && PCMCIA
+        ---help---
+          Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
+          (PC-card) wireless Ethernet networking card to your computer.
+          Please read the file <file:Documentation/networking/ray_cs.txt> for
+          details.
+
+          To compile this driver as a module, choose M here: the module will be
+          called ray_cs.  If unsure, say N.
+
+comment "Wireless 802.11b ISA/PCI cards support"
+        depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
+
+config AIRO
+        tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
+        depends on NET_RADIO && ISA && (PCI || BROKEN)
+        ---help---
+          This is the standard Linux driver to support Cisco/Aironet ISA and
+          PCI 802.11 wireless cards.
+          It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+          - with or without encryption) as well as card before the Cisco
+          aquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+
+          This driver support both the standard Linux Wireless Extensions
+          and Cisco proprietary API, so both the Linux Wireless Tools and the
+          Cisco Linux utilities can be used to configure the card.
+
+          The driver can be compiled as a module and will be named "airo".
+
+config HERMES
+        tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
+        depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA)
+        ---help---
+          A driver for 802.11b wireless cards based based on the "Hermes" or
+          Intersil HFA384x (Prism 2) MAC controller.  This includes the vast
+          majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
+          - except for the Cisco/Aironet cards.  Cards supported include the
+          Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
+          Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
+          IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
+          MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
+          PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
+
+          This option includes the guts of the driver, but in order to
+          actually use a card you will also need to enable support for PCMCIA
+          Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
+
+          You will also very likely also need the Wireless Tools in order to
+          configure your card and that /etc/pcmcia/wireless.opts works :
+          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
+
+config APPLE_AIRPORT
+        tristate "Apple Airport support (built-in)"
+        depends on PPC_PMAC && HERMES
+        help
+          Say Y here to support the Airport 802.11b wireless Ethernet hardware
+          built into the Macintosh iBook and other recent PowerPC-based
+          Macintosh machines. This is essentially a Lucent Orinoco card with 
+          a non-standard interface
+
+config PLX_HERMES
+        tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)"
+        depends on PCI && HERMES && EXPERIMENTAL
+        help
+          Enable support for PCMCIA cards supported by the "Hermes" (aka
+          orinoco) driver when used in PLX9052 based PCI adaptors.  These
+          adaptors are not a full PCMCIA controller but act as a more limited
+          PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
+          802.11b PCMCIA cards can be used in desktop machines.  The Netgear
+          MA301 is such an adaptor.
+
+          Support for these adaptors is so far still incomplete and buggy.
+          You have been warned.
+
+config TMD_HERMES
+        tristate "Hermes in TMD7160 based PCI adaptor support (EXPERIMENTAL)"
+        depends on PCI && HERMES && EXPERIMENTAL
+        help
+          Enable support for PCMCIA cards supported by the "Hermes" (aka
+          orinoco) driver when used in TMD7160 based PCI adaptors.  These
+          adaptors are not a full PCMCIA controller but act as a more limited
+          PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
+          802.11b PCMCIA cards can be used in desktop machines.
+
+          Support for these adaptors is so far still incomplete and buggy.
+          You have been warned.
+
+config PCI_HERMES
+        tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)"
+        depends on PCI && HERMES && EXPERIMENTAL
+        help
+          Enable support for PCI and mini-PCI 802.11b wireless NICs based on
+          the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b
+          PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
+          common.  Some of the built-in wireless adaptors in laptops are of
+          this variety.
+
+config ATMEL
+      tristate "Atmel at76c50x chipset  802.11b support"
+      depends on NET_RADIO && EXPERIMENTAL
+      select FW_LOADER
+      select CRC32
+       ---help---
+        A driver 802.11b wireless cards based on the Atmel fast-vnet
+        chips. This driver supports standard Linux wireless extensions. 
+ 
+        Many  cards based on this chipset do not have flash memory
+        and need their firmware loaded at start-up. If yours is 
+        one of these, you will need to provide a firmware image
+        to be loaded into the card by the driver. The Atmel
+        firmware package can be downloaded from
+        <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+      tristate "Atmel at76c506 PCI cards"
+      depends on ATMEL && PCI
+       ---help---
+        Enable support for PCI and mini-PCI cards containing the
+        Atmel at76c506 chip.
+
+# If Pcmcia is compiled in, offer Pcmcia cards...
+comment "Wireless 802.11b Pcmcia/Cardbus cards support"
+        depends on NET_RADIO && PCMCIA
+
+config PCMCIA_HERMES
+        tristate "Hermes PCMCIA card support"
+        depends on NET_RADIO && PCMCIA && HERMES
+        ---help---
+          A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
+          as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
+          EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
+          others).  It should also be usable on various Prism II based cards
+          such as the Linksys, D-Link and Farallon Skyline.  It should also
+          work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
+
+          To use your PC-cards, you will need supporting software from David
+          Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+          for location).  You also want to check out the PCMCIA-HOWTO,
+          available from <http://www.tldp.org/docs.html#howto>.
+
+          You will also very likely also need the Wireless Tools in order to
+          configure your card and that /etc/pcmcia/wireless.opts works:
+          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+config AIRO_CS
+        tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
+        depends on NET_RADIO && PCMCIA
+        ---help---
+          This is the standard Linux driver to support Cisco/Aironet PCMCIA
+          802.11 wireless cards.  This driver is the same as the Aironet
+          driver part of the Linux Pcmcia package.
+          It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+          - with or without encryption) as well as card before the Cisco
+          aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
+          supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
+          802.11b cards.
+
+          This driver support both the standard Linux Wireless Extensions
+          and Cisco proprietary API, so both the Linux Wireless Tools and the
+          Cisco Linux utilities can be used to configure the card.
+
+          To use your PC-cards, you will need supporting software from David
+          Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+          for location).  You also want to check out the PCMCIA-HOWTO,
+          available from <http://www.tldp.org/docs.html#howto>.
+
+config PCMCIA_ATMEL
+        tristate "Atmel at76c502/at76c504 PCMCIA cards"
+        depends on NET_RADIO && ATMEL && PCMCIA
+        select FW_LOADER
+        select CRC32
+        ---help---
+          Enable support for PCMCIA cards containing the
+          Atmel at76c502 and at76c504 chips.
+
+config PCMCIA_WL3501
+      tristate "Planet WL3501 PCMCIA cards"
+      depends on NET_RADIO && EXPERIMENTAL && PCMCIA
+       ---help---
+         A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
+         It has basic support for Linux wireless extensions and initial
+         micro support for ethtool.
+
+comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support"
+        depends on NET_RADIO && PCI
+config PRISM54
+        tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' 
+        depends on PCI && NET_RADIO && EXPERIMENTAL
+        select FW_LOADER
+        ---help---
+          Enable PCI and Cardbus support for the following chipset based cards:
+
+          ISL3880 - Prism GT            802.11 b/g
+          ISL3877 - Prism Indigo        802.11 a
+          ISL3890 - Prism Duette        802.11 a/b/g
+          
+          For a complete list of supported cards visit <http://prism54.org>.
+          Here is the latest confirmed list of supported cards:
+
+          3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+          Allnet ALL0271 PCI Card
+          Compex WL54G Cardbus Card
+          Corega CG-WLCB54GT Cardbus Card
+          D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
+          I-O Data WN-G54/CB Cardbus Card
+          Kobishi XG-300 aka Z-Com Cardbus Card
+          Netgear WG511 Cardbus Card
+          Ovislink WL-5400PCI PCI Card
+          Peabird WLG-PCI PCI Card
+          Sitecom WL-100i Cardbus Card
+          Sitecom WL-110i PCI Card
+          SMC2802W -    EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
+          SMC2835W -    EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+          SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+          Z-Com XG-900 PCI Card
+          Zyxel G-100 Cardbus Card
+
+          If you enable this you will need a firmware file as well.
+          You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
+          You can get this non-GPL'd firmware file from the Prism54 project page:
+          <http://prism54.org>
+          You will also need the /etc/hotplug/firmware.agent script from
+          a current hotplug package.
+
+          Note: You need a motherboard with DMA support to use any of these cards 
+          
+          If you want to compile the driver as a module ( = code which can be
+          inserted in and removed from the running kernel whenever you want),
+          say M here and read <file:Documentation/modules.txt>.  The module
+          will be called prism54.ko.
+
+# yes, this works even when no drivers are selected
+config NET_WIRELESS
+        bool
+        depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
+        default y
+
+endmenu
+