wimax/i2400m: Add support for more i6x50 SKUs

The Intel WiMax Wireless Link 6050 can show under more than one USB
ID. Add support for all, introducing a generic flag (i2400mu->i6050)
that denotes a 6x50 based device.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>

2 files changed, 13 insertions, 1 deletions

diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h
index 5cc0f279417e..2d7c96d7e865 100644
--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -151,6 +151,7 @@ enum {
 
         /* Device IDs */
         USB_DEVICE_ID_I6050 = 0x0186,
+        USB_DEVICE_ID_I6050_2 = 0x0188,
 };
 
 
@@ -234,6 +235,7 @@ struct i2400mu {
         u8 rx_size_auto_shrink;
 
         struct dentry *debugfs_dentry;
+        unsigned i6050:1;       /* 1 if this is a 6050 based SKU */
 };
 
 
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 3b48681f8a0d..98f4f8c5fb68 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -478,7 +478,16 @@ int i2400mu_probe(struct usb_interface *iface,
         i2400m->bus_bm_wait_for_ack = i2400mu_bus_bm_wait_for_ack;
         i2400m->bus_bm_mac_addr_impaired = 0;
 
-        if (id->idProduct == USB_DEVICE_ID_I6050) {
+        switch (id->idProduct) {
+        case USB_DEVICE_ID_I6050:
+        case USB_DEVICE_ID_I6050_2:
+                i2400mu->i6050 = 1;
+                break;
+        default:
+                break;
+        }
+
+        if (i2400mu->i6050) {
                 i2400m->bus_fw_names = i2400mu_bus_fw_names_6050;
                 i2400mu->endpoint_cfg.bulk_out = 0;
                 i2400mu->endpoint_cfg.notification = 3;
@@ -719,6 +728,7 @@ int i2400mu_post_reset(struct usb_interface *iface)
 static
 struct usb_device_id i2400mu_id_table[] = {
         { USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) },
+        { USB_DEVICE(0x8086, USB_DEVICE_ID_I6050_2) },
         { USB_DEVICE(0x8086, 0x0181) },
         { USB_DEVICE(0x8086, 0x1403) },
         { USB_DEVICE(0x8086, 0x1405) },