i2400m: remove SDIO device support

SDIO support in this driver was intended to support the iwmc3200
device.  This hardware never became available to normal humans.
Leaving this driver imposes unwelcome maintenance costs for no clear
benefit.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>

1 files changed, 0 insertions, 210 deletions

diff --git a/drivers/net/wimax/i2400m/sdio-fw.c b/drivers/net/wimax/i2400m/sdio-fw.c
deleted file mode 100644
index 8e025418f5be..000000000000
--- a/drivers/net/wimax/i2400m/sdio-fw.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Intel Wireless WiMAX Connection 2400m
- * Firmware uploader's SDIO specifics
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- * Intel Corporation <linux-wimax@intel.com>
- * Yanir Lubetkin <yanirx.lubetkin@intel.com>
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *  - Initial implementation
- *
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *  - Bus generic/specific split for USB
- *
- * Dirk Brandewie <dirk.j.brandewie@intel.com>
- *  - Initial implementation for SDIO
- *
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *  - SDIO rehash for changes in the bus-driver model
- *
- * Dirk Brandewie <dirk.j.brandewie@intel.com>
- *  - Make it IRQ based, not polling
- *
- * THE PROCEDURE
- *
- * See fw.c for the generic description of this procedure.
- *
- * This file implements only the SDIO specifics. It boils down to how
- * to send a command and waiting for an acknowledgement from the
- * device.
- *
- * All this code is sequential -- all i2400ms_bus_bm_*() functions are
- * executed in the same thread, except i2400ms_bm_irq() [on its own by
- * the SDIO driver]. This makes it possible to avoid locking.
- *
- * COMMAND EXECUTION
- *
- * The generic firmware upload code will call i2400m_bus_bm_cmd_send()
- * to send commands.
- *
- * The SDIO devices expects things in 256 byte blocks, so it will pad
- * it, compute the checksum (if needed) and pass it to SDIO.
- *
- * ACK RECEPTION
- *
- * This works in IRQ mode -- the fw loader says when to wait for data
- * and for that it calls i2400ms_bus_bm_wait_for_ack().
- *
- * This checks if there is any data available (RX size > 0); if not,
- * waits for the IRQ handler to notify about it. Once there is data,
- * it is read and passed to the caller. Doing it this way we don't
- * need much coordination/locking, and it makes it much more difficult
- * for an interrupt to be lost and the wait_for_ack() function getting
- * stuck even when data is pending.
- */
-#include <linux/mmc/sdio_func.h>
-#include "i2400m-sdio.h"
-
-
-#define D_SUBMODULE fw
-#include "sdio-debug-levels.h"
-
-
-/*
- * Send a boot-mode command to the SDIO function
- *
- * We use a bounce buffer (i2400m->bm_cmd_buf) because we need to
- * touch the header if the RAW flag is not set.
- *
- * @flags: pass thru from i2400m_bm_cmd()
- * @return: cmd_size if ok, < 0 errno code on error.
- *
- * Note the command is padded to the SDIO block size for the device.
- */
-ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *i2400m,
-                                const struct i2400m_bootrom_header *_cmd,
-                                size_t cmd_size, int flags)
-{
-        ssize_t result;
-        struct device *dev = i2400m_dev(i2400m);
-        struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
-        int opcode = _cmd == NULL ? -1 : i2400m_brh_get_opcode(_cmd);
-        struct i2400m_bootrom_header *cmd;
-        /* SDIO restriction */
-        size_t cmd_size_a = ALIGN(cmd_size, I2400MS_BLK_SIZE);
-
-        d_fnstart(5, dev, "(i2400m %p cmd %p size %zu)\n",
-                  i2400m, _cmd, cmd_size);
-        result = -E2BIG;
-        if (cmd_size > I2400M_BM_CMD_BUF_SIZE)
-                goto error_too_big;
-
-        if (_cmd != i2400m->bm_cmd_buf)
-                memmove(i2400m->bm_cmd_buf, _cmd, cmd_size);
-        cmd = i2400m->bm_cmd_buf;
-        if (cmd_size_a > cmd_size)                      /* Zero pad space */
-                memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size);
-        if ((flags & I2400M_BM_CMD_RAW) == 0) {
-                if (WARN_ON(i2400m_brh_get_response_required(cmd) == 0))
-                        dev_warn(dev, "SW BUG: response_required == 0\n");
-                i2400m_bm_cmd_prepare(cmd);
-        }
-        d_printf(4, dev, "BM cmd %d: %zu bytes (%zu padded)\n",
-                 opcode, cmd_size, cmd_size_a);
-        d_dump(5, dev, cmd, cmd_size);
-
-        sdio_claim_host(i2400ms->func);                 /* Send & check */
-        result = sdio_memcpy_toio(i2400ms->func, I2400MS_DATA_ADDR,
-                                  i2400m->bm_cmd_buf, cmd_size_a);
-        sdio_release_host(i2400ms->func);
-        if (result < 0) {
-                dev_err(dev, "BM cmd %d: cannot send: %ld\n",
-                        opcode, (long) result);
-                goto error_cmd_send;
-        }
-        result = cmd_size;
-error_cmd_send:
-error_too_big:
-        d_fnend(5, dev, "(i2400m %p cmd %p size %zu) = %d\n",
-                i2400m, _cmd, cmd_size, (int) result);
-        return result;
-}
-
-
-/*
- * Read an ack from the device's boot-mode
- *
- * @i2400m:
- * @_ack: pointer to where to store the read data
- * @ack_size: how many bytes we should read
- *
- * Returns: < 0 errno code on error; otherwise, amount of received bytes.
- *
- * The ACK for a BM command is always at least sizeof(*ack) bytes, so
- * check for that. We don't need to check for device reboots
- *
- */
-ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *i2400m,
-                                    struct i2400m_bootrom_header *ack,
-                                    size_t ack_size)
-{
-        ssize_t result;
-        struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
-        struct sdio_func *func = i2400ms->func;
-        struct device *dev = &func->dev;
-        int size;
-
-        BUG_ON(sizeof(*ack) > ack_size);
-
-        d_fnstart(5, dev, "(i2400m %p ack %p size %zu)\n",
-                  i2400m, ack, ack_size);
-
-        result = wait_event_timeout(i2400ms->bm_wfa_wq,
-                                    i2400ms->bm_ack_size != -EINPROGRESS,
-                                    2 * HZ);
-        if (result == 0) {
-                result = -ETIMEDOUT;
-                dev_err(dev, "BM: error waiting for an ack\n");
-                goto error_timeout;
-        }
-
-        spin_lock(&i2400m->rx_lock);
-        result = i2400ms->bm_ack_size;
-        BUG_ON(result == -EINPROGRESS);
-        if (result < 0)        /* so we exit when rx_release() is called */
-                dev_err(dev, "BM: %s failed: %zd\n", __func__, result);
-        else {
-                size = min(ack_size, i2400ms->bm_ack_size);
-                memcpy(ack, i2400m->bm_ack_buf, size);
-        }
-        /*
-         * Remember always to clear the bm_ack_size to -EINPROGRESS
-         * after the RX data is processed
-         */
-        i2400ms->bm_ack_size = -EINPROGRESS;
-        spin_unlock(&i2400m->rx_lock);
-
-error_timeout:
-        d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %zd\n",
-                i2400m, ack, ack_size, result);
-        return result;
-}