Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 839 insertions, 0 deletions

diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
new file mode 100644
index 000000000000..1e7b47704ad9
--- /dev/null
+++ b/drivers/net/wan/wanxl.c
@@ -0,0 +1,839 @@
+/*
+ * wanXL serial card driver for Linux
+ * host part
+ *
+ * Copyright (C) 2003 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Status:
+ *   - Only DTE (external clock) support with NRZ and NRZI encodings
+ *   - wanXL100 will require minor driver modifications, no access to hw
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/hdlc.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#include "wanxl.h"
+
+static const char* version = "wanXL serial card driver version: 0.48";
+
+#define PLX_CTL_RESET   0x40000000 /* adapter reset */
+
+#undef DEBUG_PKT
+#undef DEBUG_PCI
+
+/* MAILBOX #1 - PUTS COMMANDS */
+#define MBX1_CMD_ABORTJ 0x85000000 /* Abort and Jump */
+#ifdef __LITTLE_ENDIAN
+#define MBX1_CMD_BSWAP  0x8C000001 /* little-endian Byte Swap Mode */
+#else
+#define MBX1_CMD_BSWAP  0x8C000000 /* big-endian Byte Swap Mode */
+#endif
+
+/* MAILBOX #2 - DRAM SIZE */
+#define MBX2_MEMSZ_MASK 0xFFFF0000 /* PUTS Memory Size Register mask */
+
+
+typedef struct {
+        struct net_device *dev;
+        struct card_t *card;
+        spinlock_t lock;        /* for wanxl_xmit */
+        int node;               /* physical port #0 - 3 */
+        unsigned int clock_type;
+        int tx_in, tx_out;
+        struct sk_buff *tx_skbs[TX_BUFFERS];
+}port_t;
+
+
+typedef struct {
+        desc_t rx_descs[RX_QUEUE_LENGTH];
+        port_status_t port_status[4];
+}card_status_t;
+
+
+typedef struct card_t {
+        int n_ports;            /* 1, 2 or 4 ports */
+        u8 irq;
+
+        u8 __iomem *plx;        /* PLX PCI9060 virtual base address */
+        struct pci_dev *pdev;   /* for pci_name(pdev) */
+        int rx_in;
+        struct sk_buff *rx_skbs[RX_QUEUE_LENGTH];
+        card_status_t *status;  /* shared between host and card */
+        dma_addr_t status_address;
+        port_t ports[0];        /* 1 - 4 port_t structures follow */
+}card_t;
+
+
+
+static inline port_t* dev_to_port(struct net_device *dev)
+{
+        return (port_t *)dev_to_hdlc(dev)->priv;
+}
+
+
+static inline port_status_t* get_status(port_t *port)
+{
+        return &port->card->status->port_status[port->node];
+}
+
+
+#ifdef DEBUG_PCI
+static inline dma_addr_t pci_map_single_debug(struct pci_dev *pdev, void *ptr,
+                                              size_t size, int direction)
+{
+        dma_addr_t addr = pci_map_single(pdev, ptr, size, direction);
+        if (addr + size > 0x100000000LL)
+                printk(KERN_CRIT "wanXL %s: pci_map_single() returned memory"
+                       " at 0x%LX!\n", pci_name(pdev),
+                       (unsigned long long)addr);
+        return addr;
+}
+
+#undef pci_map_single
+#define pci_map_single pci_map_single_debug
+#endif
+
+
+/* Cable and/or personality module change interrupt service */
+static inline void wanxl_cable_intr(port_t *port)
+{
+        u32 value = get_status(port)->cable;
+        int valid = 1;
+        const char *cable, *pm, *dte = "", *dsr = "", *dcd = "";
+
+        switch(value & 0x7) {
+        case STATUS_CABLE_V35: cable = "V.35"; break;
+        case STATUS_CABLE_X21: cable = "X.21"; break;
+        case STATUS_CABLE_V24: cable = "V.24"; break;
+        case STATUS_CABLE_EIA530: cable = "EIA530"; break;
+        case STATUS_CABLE_NONE: cable = "no"; break;
+        default: cable = "invalid";
+        }
+
+        switch((value >> STATUS_CABLE_PM_SHIFT) & 0x7) {
+        case STATUS_CABLE_V35: pm = "V.35"; break;
+        case STATUS_CABLE_X21: pm = "X.21"; break;
+        case STATUS_CABLE_V24: pm = "V.24"; break;
+        case STATUS_CABLE_EIA530: pm = "EIA530"; break;
+        case STATUS_CABLE_NONE: pm = "no personality"; valid = 0; break;
+        default: pm = "invalid personality"; valid = 0;
+        }
+
+        if (valid) {
+                if ((value & 7) == ((value >> STATUS_CABLE_PM_SHIFT) & 7)) {
+                        dsr = (value & STATUS_CABLE_DSR) ? ", DSR ON" :
+                                ", DSR off";
+                        dcd = (value & STATUS_CABLE_DCD) ? ", carrier ON" :
+                                ", carrier off";
+                }
+                dte = (value & STATUS_CABLE_DCE) ? " DCE" : " DTE";
+        }
+        printk(KERN_INFO "%s: %s%s module, %s cable%s%s\n",
+               port->dev->name, pm, dte, cable, dsr, dcd);
+
+        hdlc_set_carrier(value & STATUS_CABLE_DCD, port->dev);
+}
+
+
+
+/* Transmit complete interrupt service */
+static inline void wanxl_tx_intr(port_t *port)
+{
+        struct net_device *dev = port->dev;
+        struct net_device_stats *stats = hdlc_stats(dev);
+        while (1) {
+                desc_t *desc = &get_status(port)->tx_descs[port->tx_in];
+                struct sk_buff *skb = port->tx_skbs[port->tx_in];
+
+                switch (desc->stat) {
+                case PACKET_FULL:
+                case PACKET_EMPTY:
+                        netif_wake_queue(dev);
+                        return;
+
+                case PACKET_UNDERRUN:
+                        stats->tx_errors++;
+                        stats->tx_fifo_errors++;
+                        break;
+
+                default:
+                        stats->tx_packets++;
+                        stats->tx_bytes += skb->len;
+                }
+                desc->stat = PACKET_EMPTY; /* Free descriptor */
+                pci_unmap_single(port->card->pdev, desc->address, skb->len,
+                                 PCI_DMA_TODEVICE);
+                dev_kfree_skb_irq(skb);
+                port->tx_in = (port->tx_in + 1) % TX_BUFFERS;
+        }
+}
+
+
+
+/* Receive complete interrupt service */
+static inline void wanxl_rx_intr(card_t *card)
+{
+        desc_t *desc;
+        while (desc = &card->status->rx_descs[card->rx_in],
+               desc->stat != PACKET_EMPTY) {
+                if ((desc->stat & PACKET_PORT_MASK) > card->n_ports)
+                        printk(KERN_CRIT "wanXL %s: received packet for"
+                               " nonexistent port\n", pci_name(card->pdev));
+                else {
+                        struct sk_buff *skb = card->rx_skbs[card->rx_in];
+                        port_t *port = &card->ports[desc->stat &
+                                                    PACKET_PORT_MASK];
+                        struct net_device *dev = port->dev;
+                        struct net_device_stats *stats = hdlc_stats(dev);
+
+                        if (!skb)
+                                stats->rx_dropped++;
+                        else {
+                                pci_unmap_single(card->pdev, desc->address,
+                                                 BUFFER_LENGTH,
+                                                 PCI_DMA_FROMDEVICE);
+                                skb_put(skb, desc->length);
+
+#ifdef DEBUG_PKT
+                                printk(KERN_DEBUG "%s RX(%i):", dev->name,
+                                       skb->len);
+                                debug_frame(skb);
+#endif
+                                stats->rx_packets++;
+                                stats->rx_bytes += skb->len;
+                                dev->last_rx = jiffies;
+                                skb->protocol = hdlc_type_trans(skb, dev);
+                                netif_rx(skb);
+                                skb = NULL;
+                        }
+
+                        if (!skb) {
+                                skb = dev_alloc_skb(BUFFER_LENGTH);
+                                desc->address = skb ?
+                                        pci_map_single(card->pdev, skb->data,
+                                                       BUFFER_LENGTH,
+                                                       PCI_DMA_FROMDEVICE) : 0;
+                                card->rx_skbs[card->rx_in] = skb;
+                        }
+                }
+                desc->stat = PACKET_EMPTY; /* Free descriptor */
+                card->rx_in = (card->rx_in + 1) % RX_QUEUE_LENGTH;
+        }
+}
+
+
+
+static irqreturn_t wanxl_intr(int irq, void* dev_id, struct pt_regs *regs)
+{
+        card_t *card = dev_id;
+        int i;
+        u32 stat;
+        int handled = 0;
+
+
+        while((stat = readl(card->plx + PLX_DOORBELL_FROM_CARD)) != 0) {
+                handled = 1;
+                writel(stat, card->plx + PLX_DOORBELL_FROM_CARD);
+
+                for (i = 0; i < card->n_ports; i++) {
+                        if (stat & (1 << (DOORBELL_FROM_CARD_TX_0 + i)))
+                                wanxl_tx_intr(&card->ports[i]);
+                        if (stat & (1 << (DOORBELL_FROM_CARD_CABLE_0 + i)))
+                                wanxl_cable_intr(&card->ports[i]);
+                }
+                if (stat & (1 << DOORBELL_FROM_CARD_RX))
+                        wanxl_rx_intr(card);
+        }
+
+        return IRQ_RETVAL(handled);
+}
+
+
+
+static int wanxl_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+        port_t *port = dev_to_port(dev);
+        desc_t *desc;
+
+        spin_lock(&port->lock);
+
+        desc = &get_status(port)->tx_descs[port->tx_out];
+        if (desc->stat != PACKET_EMPTY) {
+                /* should never happen - previous xmit should stop queue */
+#ifdef DEBUG_PKT
+                printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name);
+#endif
+                netif_stop_queue(dev);
+                spin_unlock_irq(&port->lock);
+                return 1;       /* request packet to be queued */
+        }
+
+#ifdef DEBUG_PKT
+        printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len);
+        debug_frame(skb);
+#endif
+
+        port->tx_skbs[port->tx_out] = skb;
+        desc->address = pci_map_single(port->card->pdev, skb->data, skb->len,
+                                       PCI_DMA_TODEVICE);
+        desc->length = skb->len;
+        desc->stat = PACKET_FULL;
+        writel(1 << (DOORBELL_TO_CARD_TX_0 + port->node),
+               port->card->plx + PLX_DOORBELL_TO_CARD);
+        dev->trans_start = jiffies;
+
+        port->tx_out = (port->tx_out + 1) % TX_BUFFERS;
+
+        if (get_status(port)->tx_descs[port->tx_out].stat != PACKET_EMPTY) {
+                netif_stop_queue(dev);
+#ifdef DEBUG_PKT
+                printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name);
+#endif
+        }
+
+        spin_unlock(&port->lock);
+        return 0;
+}
+
+
+
+static int wanxl_attach(struct net_device *dev, unsigned short encoding,
+                        unsigned short parity)
+{
+        port_t *port = dev_to_port(dev);
+
+        if (encoding != ENCODING_NRZ &&
+            encoding != ENCODING_NRZI)
+                return -EINVAL;
+
+        if (parity != PARITY_NONE &&
+            parity != PARITY_CRC32_PR1_CCITT &&
+            parity != PARITY_CRC16_PR1_CCITT &&
+            parity != PARITY_CRC32_PR0_CCITT &&
+            parity != PARITY_CRC16_PR0_CCITT)
+                return -EINVAL;
+
+        get_status(port)->encoding = encoding;
+        get_status(port)->parity = parity;
+        return 0;
+}
+
+
+
+static int wanxl_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+        const size_t size = sizeof(sync_serial_settings);
+        sync_serial_settings line;
+        port_t *port = dev_to_port(dev);
+
+        if (cmd != SIOCWANDEV)
+                return hdlc_ioctl(dev, ifr, cmd);
+
+        switch (ifr->ifr_settings.type) {
+        case IF_GET_IFACE:
+                ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
+                if (ifr->ifr_settings.size < size) {
+                        ifr->ifr_settings.size = size; /* data size wanted */
+                        return -ENOBUFS;
+                }
+                line.clock_type = get_status(port)->clocking;
+                line.clock_rate = 0;
+                line.loopback = 0;
+
+                if (copy_to_user(ifr->ifr_settings.ifs_ifsu.sync, &line, size))
+                        return -EFAULT;
+                return 0;
+
+        case IF_IFACE_SYNC_SERIAL:
+                if (!capable(CAP_NET_ADMIN))
+                        return -EPERM;
+                if (dev->flags & IFF_UP)
+                        return -EBUSY;
+
+                if (copy_from_user(&line, ifr->ifr_settings.ifs_ifsu.sync,
+                                   size))
+                        return -EFAULT;
+
+                if (line.clock_type != CLOCK_EXT &&
+                    line.clock_type != CLOCK_TXFROMRX)
+                        return -EINVAL; /* No such clock setting */
+
+                if (line.loopback != 0)
+                        return -EINVAL;
+
+                get_status(port)->clocking = line.clock_type;
+                return 0;
+
+        default:
+                return hdlc_ioctl(dev, ifr, cmd);
+        }
+}
+
+
+
+static int wanxl_open(struct net_device *dev)
+{
+        port_t *port = dev_to_port(dev);
+        u8 __iomem *dbr = port->card->plx + PLX_DOORBELL_TO_CARD;
+        unsigned long timeout;
+        int i;
+
+        if (get_status(port)->open) {
+                printk(KERN_ERR "%s: port already open\n", dev->name);
+                return -EIO;
+        }
+        if ((i = hdlc_open(dev)) != 0)
+                return i;
+
+        port->tx_in = port->tx_out = 0;
+        for (i = 0; i < TX_BUFFERS; i++)
+                get_status(port)->tx_descs[i].stat = PACKET_EMPTY;
+        /* signal the card */
+        writel(1 << (DOORBELL_TO_CARD_OPEN_0 + port->node), dbr);
+
+        timeout = jiffies + HZ;
+        do
+                if (get_status(port)->open) {
+                        netif_start_queue(dev);
+                        return 0;
+                }
+        while (time_after(timeout, jiffies));
+
+        printk(KERN_ERR "%s: unable to open port\n", dev->name);
+        /* ask the card to close the port, should it be still alive */
+        writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), dbr);
+        return -EFAULT;
+}
+
+
+
+static int wanxl_close(struct net_device *dev)
+{
+        port_t *port = dev_to_port(dev);
+        unsigned long timeout;
+        int i;
+
+        hdlc_close(dev);
+        /* signal the card */
+        writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node),
+               port->card->plx + PLX_DOORBELL_TO_CARD);
+
+        timeout = jiffies + HZ;
+        do
+                if (!get_status(port)->open)
+                        break;
+        while (time_after(timeout, jiffies));
+
+        if (get_status(port)->open)
+                printk(KERN_ERR "%s: unable to close port\n", dev->name);
+
+        netif_stop_queue(dev);
+
+        for (i = 0; i < TX_BUFFERS; i++) {
+                desc_t *desc = &get_status(port)->tx_descs[i];
+
+                if (desc->stat != PACKET_EMPTY) {
+                        desc->stat = PACKET_EMPTY;
+                        pci_unmap_single(port->card->pdev, desc->address,
+                                         port->tx_skbs[i]->len,
+                                         PCI_DMA_TODEVICE);
+                        dev_kfree_skb(port->tx_skbs[i]);
+                }
+        }
+        return 0;
+}
+
+
+
+static struct net_device_stats *wanxl_get_stats(struct net_device *dev)
+{
+        struct net_device_stats *stats = hdlc_stats(dev);
+        port_t *port = dev_to_port(dev);
+
+        stats->rx_over_errors = get_status(port)->rx_overruns;
+        stats->rx_frame_errors = get_status(port)->rx_frame_errors;
+        stats->rx_errors = stats->rx_over_errors + stats->rx_frame_errors;
+        return stats;
+}
+
+
+
+static int wanxl_puts_command(card_t *card, u32 cmd)
+{
+        unsigned long timeout = jiffies + 5 * HZ;
+
+        writel(cmd, card->plx + PLX_MAILBOX_1);
+        do {
+                if (readl(card->plx + PLX_MAILBOX_1) == 0)
+                        return 0;
+
+                schedule();
+        }while (time_after(timeout, jiffies));
+
+        return -1;
+}
+
+
+
+static void wanxl_reset(card_t *card)
+{
+        u32 old_value = readl(card->plx + PLX_CONTROL) & ~PLX_CTL_RESET;
+
+        writel(0x80, card->plx + PLX_MAILBOX_0);
+        writel(old_value | PLX_CTL_RESET, card->plx + PLX_CONTROL);
+        readl(card->plx + PLX_CONTROL); /* wait for posted write */
+        udelay(1);
+        writel(old_value, card->plx + PLX_CONTROL);
+        readl(card->plx + PLX_CONTROL); /* wait for posted write */
+}
+
+
+
+static void wanxl_pci_remove_one(struct pci_dev *pdev)
+{
+        card_t *card = pci_get_drvdata(pdev);
+        int i;
+
+        for (i = 0; i < card->n_ports; i++) {
+                unregister_hdlc_device(card->ports[i].dev);
+                free_netdev(card->ports[i].dev);
+        }
+
+        /* unregister and free all host resources */
+        if (card->irq)
+                free_irq(card->irq, card);
+
+        wanxl_reset(card);
+
+        for (i = 0; i < RX_QUEUE_LENGTH; i++)
+                if (card->rx_skbs[i]) {
+                        pci_unmap_single(card->pdev,
+                                         card->status->rx_descs[i].address,
+                                         BUFFER_LENGTH, PCI_DMA_FROMDEVICE);
+                        dev_kfree_skb(card->rx_skbs[i]);
+                }
+
+        if (card->plx)
+                iounmap(card->plx);
+
+        if (card->status)
+                pci_free_consistent(pdev, sizeof(card_status_t),
+                                    card->status, card->status_address);
+
+        pci_release_regions(pdev);
+        pci_disable_device(pdev);
+        pci_set_drvdata(pdev, NULL);
+        kfree(card);
+}
+
+
+#include "wanxlfw.inc"
+
+static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
+                                        const struct pci_device_id *ent)
+{
+        card_t *card;
+        u32 ramsize, stat;
+        unsigned long timeout;
+        u32 plx_phy;            /* PLX PCI base address */
+        u32 mem_phy;            /* memory PCI base addr */
+        u8 __iomem *mem;        /* memory virtual base addr */
+        int i, ports, alloc_size;
+
+#ifndef MODULE
+        static int printed_version;
+        if (!printed_version) {
+                printed_version++;
+                printk(KERN_INFO "%s\n", version);
+        }
+#endif
+
+        i = pci_enable_device(pdev);
+        if (i)
+                return i;
+
+        /* QUICC can only access first 256 MB of host RAM directly,
+           but PLX9060 DMA does 32-bits for actual packet data transfers */
+
+        /* FIXME when PCI/DMA subsystems are fixed.
+           We set both dma_mask and consistent_dma_mask to 28 bits
+           and pray pci_alloc_consistent() will use this info. It should
+           work on most platforms */
+        if (pci_set_consistent_dma_mask(pdev, 0x0FFFFFFF) ||
+            pci_set_dma_mask(pdev, 0x0FFFFFFF)) {
+                printk(KERN_ERR "wanXL: No usable DMA configuration\n");
+                return -EIO;
+        }
+
+        i = pci_request_regions(pdev, "wanXL");
+        if (i) {
+                pci_disable_device(pdev);
+                return i;
+        }
+
+        switch (pdev->device) {
+        case PCI_DEVICE_ID_SBE_WANXL100: ports = 1; break;
+        case PCI_DEVICE_ID_SBE_WANXL200: ports = 2; break;
+        default: ports = 4;
+        }
+
+        alloc_size = sizeof(card_t) + ports * sizeof(port_t);
+        card = kmalloc(alloc_size, GFP_KERNEL);
+        if (card == NULL) {
+                printk(KERN_ERR "wanXL %s: unable to allocate memory\n",
+                       pci_name(pdev));
+                pci_release_regions(pdev);
+                pci_disable_device(pdev);
+                return -ENOBUFS;
+        }
+        memset(card, 0, alloc_size);
+
+        pci_set_drvdata(pdev, card);
+        card->pdev = pdev;
+
+        card->status = pci_alloc_consistent(pdev, sizeof(card_status_t),
+                                            &card->status_address);
+        if (card->status == NULL) {
+                wanxl_pci_remove_one(pdev);
+                return -ENOBUFS;
+        }
+
+#ifdef DEBUG_PCI
+        printk(KERN_DEBUG "wanXL %s: pci_alloc_consistent() returned memory"
+               " at 0x%LX\n", pci_name(pdev),
+               (unsigned long long)card->status_address);
+#endif
+
+        /* FIXME when PCI/DMA subsystems are fixed.
+           We set both dma_mask and consistent_dma_mask back to 32 bits
+           to indicate the card can do 32-bit DMA addressing */
+        if (pci_set_consistent_dma_mask(pdev, 0xFFFFFFFF) ||
+            pci_set_dma_mask(pdev, 0xFFFFFFFF)) {
+                printk(KERN_ERR "wanXL: No usable DMA configuration\n");
+                wanxl_pci_remove_one(pdev);
+                return -EIO;
+        }
+
+        /* set up PLX mapping */
+        plx_phy = pci_resource_start(pdev, 0);
+        card->plx = ioremap_nocache(plx_phy, 0x70);
+
+#if RESET_WHILE_LOADING
+        wanxl_reset(card);
+#endif
+
+        timeout = jiffies + 20 * HZ;
+        while ((stat = readl(card->plx + PLX_MAILBOX_0)) != 0) {
+                if (time_before(timeout, jiffies)) {
+                        printk(KERN_WARNING "wanXL %s: timeout waiting for"
+                               " PUTS to complete\n", pci_name(pdev));
+                        wanxl_pci_remove_one(pdev);
+                        return -ENODEV;
+                }
+
+                switch(stat & 0xC0) {
+                case 0x00:      /* hmm - PUTS completed with non-zero code? */
+                case 0x80:      /* PUTS still testing the hardware */
+                        break;
+
+                default:
+                        printk(KERN_WARNING "wanXL %s: PUTS test 0x%X"
+                               " failed\n", pci_name(pdev), stat & 0x30);
+                        wanxl_pci_remove_one(pdev);
+                        return -ENODEV;
+                }
+
+                schedule();
+        }
+
+        /* get on-board memory size (PUTS detects no more than 4 MB) */
+        ramsize = readl(card->plx + PLX_MAILBOX_2) & MBX2_MEMSZ_MASK;
+
+        /* set up on-board RAM mapping */
+        mem_phy = pci_resource_start(pdev, 2);
+
+
+        /* sanity check the board's reported memory size */
+        if (ramsize < BUFFERS_ADDR +
+            (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports) {
+                printk(KERN_WARNING "wanXL %s: no enough on-board RAM"
+                       " (%u bytes detected, %u bytes required)\n",
+                       pci_name(pdev), ramsize, BUFFERS_ADDR +
+                       (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports);
+                wanxl_pci_remove_one(pdev);
+                return -ENODEV;
+        }
+
+        if (wanxl_puts_command(card, MBX1_CMD_BSWAP)) {
+                printk(KERN_WARNING "wanXL %s: unable to Set Byte Swap"
+                       " Mode\n", pci_name(pdev));
+                wanxl_pci_remove_one(pdev);
+                return -ENODEV;
+        }
+
+        for (i = 0; i < RX_QUEUE_LENGTH; i++) {
+                struct sk_buff *skb = dev_alloc_skb(BUFFER_LENGTH);
+                card->rx_skbs[i] = skb;
+                if (skb)
+                        card->status->rx_descs[i].address =
+                                pci_map_single(card->pdev, skb->data,
+                                               BUFFER_LENGTH,
+                                               PCI_DMA_FROMDEVICE);
+        }
+
+        mem = ioremap_nocache(mem_phy, PDM_OFFSET + sizeof(firmware));
+        for (i = 0; i < sizeof(firmware); i += 4)
+                writel(htonl(*(u32*)(firmware + i)), mem + PDM_OFFSET + i);
+
+        for (i = 0; i < ports; i++)
+                writel(card->status_address +
+                       (void *)&card->status->port_status[i] -
+                       (void *)card->status, mem + PDM_OFFSET + 4 + i * 4);
+        writel(card->status_address, mem + PDM_OFFSET + 20);
+        writel(PDM_OFFSET, mem);
+        iounmap(mem);
+
+        writel(0, card->plx + PLX_MAILBOX_5);
+
+        if (wanxl_puts_command(card, MBX1_CMD_ABORTJ)) {
+                printk(KERN_WARNING "wanXL %s: unable to Abort and Jump\n",
+                       pci_name(pdev));
+                wanxl_pci_remove_one(pdev);
+                return -ENODEV;
+        }
+
+        stat = 0;
+        timeout = jiffies + 5 * HZ;
+        do {
+                if ((stat = readl(card->plx + PLX_MAILBOX_5)) != 0)
+                        break;
+                schedule();
+        }while (time_after(timeout, jiffies));
+
+        if (!stat) {
+                printk(KERN_WARNING "wanXL %s: timeout while initializing card"
+                       "firmware\n", pci_name(pdev));
+                wanxl_pci_remove_one(pdev);
+                return -ENODEV;
+        }
+
+#if DETECT_RAM
+        ramsize = stat;
+#endif
+
+        printk(KERN_INFO "wanXL %s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n",
+               pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);
+
+        /* Allocate IRQ */
+        if (request_irq(pdev->irq, wanxl_intr, SA_SHIRQ, "wanXL", card)) {
+                printk(KERN_WARNING "wanXL %s: could not allocate IRQ%i.\n",
+                       pci_name(pdev), pdev->irq);
+                wanxl_pci_remove_one(pdev);
+                return -EBUSY;
+        }
+        card->irq = pdev->irq;
+
+        for (i = 0; i < ports; i++) {
+                hdlc_device *hdlc;
+                port_t *port = &card->ports[i];
+                struct net_device *dev = alloc_hdlcdev(port);
+                if (!dev) {
+                        printk(KERN_ERR "wanXL %s: unable to allocate"
+                               " memory\n", pci_name(pdev));
+                        wanxl_pci_remove_one(pdev);
+                        return -ENOMEM;
+                }
+
+                port->dev = dev;
+                hdlc = dev_to_hdlc(dev);
+                spin_lock_init(&port->lock);
+                SET_MODULE_OWNER(dev);
+                dev->tx_queue_len = 50;
+                dev->do_ioctl = wanxl_ioctl;
+                dev->open = wanxl_open;
+                dev->stop = wanxl_close;
+                hdlc->attach = wanxl_attach;
+                hdlc->xmit = wanxl_xmit;
+                dev->get_stats = wanxl_get_stats;
+                port->card = card;
+                port->node = i;
+                get_status(port)->clocking = CLOCK_EXT;
+                if (register_hdlc_device(dev)) {
+                        printk(KERN_ERR "wanXL %s: unable to register hdlc"
+                               " device\n", pci_name(pdev));
+                        free_netdev(dev);
+                        wanxl_pci_remove_one(pdev);
+                        return -ENOBUFS;
+                }
+                card->n_ports++;
+        }
+
+        printk(KERN_INFO "wanXL %s: port", pci_name(pdev));
+        for (i = 0; i < ports; i++)
+                printk("%s #%i: %s", i ? "," : "", i,
+                       card->ports[i].dev->name);
+        printk("\n");
+
+        for (i = 0; i < ports; i++)
+                wanxl_cable_intr(&card->ports[i]); /* get carrier status etc.*/
+
+        return 0;
+}
+
+static struct pci_device_id wanxl_pci_tbl[] __devinitdata = {
+        { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL100, PCI_ANY_ID,
+          PCI_ANY_ID, 0, 0, 0 },
+        { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL200, PCI_ANY_ID,
+          PCI_ANY_ID, 0, 0, 0 },
+        { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL400, PCI_ANY_ID,
+          PCI_ANY_ID, 0, 0, 0 },
+        { 0, }
+};
+
+
+static struct pci_driver wanxl_pci_driver = {
+        .name           = "wanXL",
+        .id_table       = wanxl_pci_tbl,
+        .probe          = wanxl_pci_init_one,
+        .remove         = wanxl_pci_remove_one,
+};
+
+
+static int __init wanxl_init_module(void)
+{
+#ifdef MODULE
+        printk(KERN_INFO "%s\n", version);
+#endif
+        return pci_module_init(&wanxl_pci_driver);
+}
+
+static void __exit wanxl_cleanup_module(void)
+{
+        pci_unregister_driver(&wanxl_pci_driver);
+}
+
+
+MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
+MODULE_DESCRIPTION("SBE Inc. wanXL serial port driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(pci, wanxl_pci_tbl);
+
+module_init(wanxl_init_module);
+module_exit(wanxl_cleanup_module);