Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	include/net/tcp.h

3 files changed, 396 insertions, 0 deletions

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index e00b5b1f6743..3717569828bf 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -180,6 +180,20 @@ config USB_NET_CDCETHER
           IEEE 802 "local assignment" bit is set in the address, a "usbX"
           name is used instead.
 
+config USB_NET_CDC_EEM
+        tristate "CDC EEM support"
+        depends on USB_USBNET && EXPERIMENTAL
+        help
+          This option supports devices conforming to the Communication Device
+          Class (CDC) Ethernet Emulation Model, a specification that's easy to
+          implement in device firmware.  The CDC EEM specifications are available
+          from <http://www.usb.org/>.
+
+          This driver creates an interface named "ethX", where X depends on
+          what other networking devices you have in use.  However, if the
+          IEEE 802 "local assignment" bit is set in the address, a "usbX"
+          name is used instead.
+
 config USB_NET_DM9601
         tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
         depends on USB_USBNET
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index f4402a06e52c..b870b0b1cbe0 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_RTL8150)	+= rtl8150.o
 obj-$(CONFIG_USB_HSO)           += hso.o
 obj-$(CONFIG_USB_NET_AX8817X)   += asix.o
 obj-$(CONFIG_USB_NET_CDCETHER)  += cdc_ether.o
+obj-$(CONFIG_USB_NET_CDC_EEM)   += cdc_eem.o
 obj-$(CONFIG_USB_NET_DM9601)    += dm9601.o
 obj-$(CONFIG_USB_NET_SMSC95XX)  += smsc95xx.o
 obj-$(CONFIG_USB_NET_GL620A)    += gl620a.o
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
new file mode 100644
index 000000000000..80e01778dd3b
--- /dev/null
+++ b/drivers/net/usb/cdc_eem.c
@@ -0,0 +1,381 @@
+/*
+ * USB CDC EEM network interface driver
+ * Copyright (C) 2009 Oberthur Technologies
+ * by Omar Laazimani, Olivier Condemine
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * This driver is an implementation of the CDC "Ethernet Emulation
+ * Model" (EEM) specification, which encapsulates Ethernet frames
+ * for transport over USB using a simpler USB device model than the
+ * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet").
+ *
+ * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf
+ *
+ * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24,
+ * 2.6.27 and 2.6.30rc2 kernel.
+ * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel).
+ * build on 23-April-2009
+ */
+
+#define EEM_HEAD        2               /* 2 byte header */
+
+/*-------------------------------------------------------------------------*/
+
+static void eem_linkcmd_complete(struct urb *urb)
+{
+        dev_kfree_skb(urb->context);
+        usb_free_urb(urb);
+}
+
+static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb)
+{
+        struct urb              *urb;
+        int                     status;
+
+        urb = usb_alloc_urb(0, GFP_ATOMIC);
+        if (!urb)
+                goto fail;
+
+        usb_fill_bulk_urb(urb, dev->udev, dev->out,
+                        skb->data, skb->len, eem_linkcmd_complete, skb);
+
+        status = usb_submit_urb(urb, GFP_ATOMIC);
+        if (status) {
+                usb_free_urb(urb);
+fail:
+                dev_kfree_skb(skb);
+                devwarn(dev, "link cmd failure\n");
+                return;
+        }
+}
+
+static int eem_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+        int status = 0;
+
+        status = usbnet_get_endpoints(dev, intf);
+        if (status < 0) {
+                usb_set_intfdata(intf, NULL);
+                usb_driver_release_interface(driver_of(intf), intf);
+                return status;
+        }
+
+        /* no jumbogram (16K) support for now */
+
+        dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN;
+
+        return 0;
+}
+
+/*
+ * EEM permits packing multiple Ethernet frames into USB transfers
+ * (a "bundle"), but for TX we don't try to do that.
+ */
+static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+                                       gfp_t flags)
+{
+        struct sk_buff  *skb2 = NULL;
+        u16             len = skb->len;
+        u32             crc = 0;
+        int             padlen = 0;
+
+        /* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is
+         * zero, stick two bytes of zero length EEM packet on the end.
+         * Else the framework would add invalid single byte padding,
+         * since it can't know whether ZLPs will be handled right by
+         * all the relevant hardware and software.
+         */
+        if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket))
+                padlen += 2;
+
+        if (!skb_cloned(skb)) {
+                int     headroom = skb_headroom(skb);
+                int     tailroom = skb_tailroom(skb);
+
+                if ((tailroom >= ETH_FCS_LEN + padlen)
+                                && (headroom >= EEM_HEAD))
+                        goto done;
+
+                if ((headroom + tailroom)
+                                > (EEM_HEAD + ETH_FCS_LEN + padlen)) {
+                        skb->data = memmove(skb->head +
+                                        EEM_HEAD,
+                                        skb->data,
+                                        skb->len);
+                        skb_set_tail_pointer(skb, len);
+                        goto done;
+                }
+        }
+
+        skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags);
+        if (!skb2)
+                return NULL;
+
+        dev_kfree_skb_any(skb);
+        skb = skb2;
+
+done:
+        /* we don't use the "no Ethernet CRC" option */
+        crc = crc32_le(~0, skb->data, skb->len);
+        crc = ~crc;
+
+        put_unaligned_le32(crc, skb_put(skb, 4));
+
+        /* EEM packet header format:
+         * b0..13:      length of ethernet frame
+         * b14:         bmCRC (1 == valid Ethernet CRC)
+         * b15:         bmType (0 == data)
+         */
+        len = skb->len;
+        put_unaligned_le16(BIT(14) | len, skb_push(skb, 2));
+
+        /* Bundle a zero length EEM packet if needed */
+        if (padlen)
+                put_unaligned_le16(0, skb_put(skb, 2));
+
+        return skb;
+}
+
+static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+        /*
+         * Our task here is to strip off framing, leaving skb with one
+         * data frame for the usbnet framework code to process.  But we
+         * may have received multiple EEM payloads, or command payloads.
+         * So we must process _everything_ as if it's a header, except
+         * maybe the last data payload
+         *
+         * REVISIT the framework needs updating so that when we consume
+         * all payloads (the last or only message was a command, or a
+         * zero length EEM packet) that is not accounted as an rx_error.
+         */
+        do {
+                struct sk_buff  *skb2 = NULL;
+                u16             header;
+                u16             len = 0;
+
+                /* incomplete EEM header? */
+                if (skb->len < EEM_HEAD)
+                        return 0;
+
+                /*
+                 * EEM packet header format:
+                 * b0..14:      EEM type dependant (Data or Command)
+                 * b15:         bmType
+                 */
+                header = get_unaligned_le16(skb->data);
+                skb_pull(skb, EEM_HEAD);
+
+                /*
+                 * The bmType bit helps to denote when EEM
+                 * packet is data or command :
+                 *      bmType = 0      : EEM data payload
+                 *      bmType = 1      : EEM (link) command
+                 */
+                if (header & BIT(15)) {
+                        u16     bmEEMCmd;
+
+                        /*
+                         * EEM (link) command packet:
+                         * b0..10:      bmEEMCmdParam
+                         * b11..13:     bmEEMCmd
+                         * b14:         bmReserved (must be 0)
+                         * b15:         1 (EEM command)
+                         */
+                        if (header & BIT(14)) {
+                                devdbg(dev, "reserved command %04x\n", header);
+                                continue;
+                        }
+
+                        bmEEMCmd = (header >> 11) & 0x7;
+                        switch (bmEEMCmd) {
+
+                        /* Responding to echo requests is mandatory. */
+                        case 0:         /* Echo command */
+                                len = header & 0x7FF;
+
+                                /* bogus command? */
+                                if (skb->len < len)
+                                        return 0;
+
+                                skb2 = skb_clone(skb, GFP_ATOMIC);
+                                if (unlikely(!skb2))
+                                        goto next;
+                                skb_trim(skb2, len);
+                                put_unaligned_le16(BIT(15) | (1 << 11) | len,
+                                                skb_push(skb2, 2));
+                                eem_linkcmd(dev, skb2);
+                                break;
+
+                        /*
+                         * Host may choose to ignore hints.
+                         *  - suspend: peripheral ready to suspend
+                         *  - response: suggest N millisec polling
+                         *  - response complete: suggest N sec polling
+                         */
+                        case 2:         /* Suspend hint */
+                        case 3:         /* Response hint */
+                        case 4:         /* Response complete hint */
+                                continue;
+
+                        /*
+                         * Hosts should never receive host-to-peripheral
+                         * or reserved command codes; or responses to an
+                         * echo command we didn't send.
+                         */
+                        case 1:         /* Echo response */
+                        case 5:         /* Tickle */
+                        default:        /* reserved */
+                                devwarn(dev, "unexpected link command %d\n",
+                                                bmEEMCmd);
+                                continue;
+                        }
+
+                } else {
+                        u32     crc, crc2;
+                        int     is_last;
+
+                        /* zero length EEM packet? */
+                        if (header == 0)
+                                continue;
+
+                        /*
+                         * EEM data packet header :
+                         * b0..13:      length of ethernet frame
+                         * b14:         bmCRC
+                         * b15:         0 (EEM data)
+                         */
+                        len = header & 0x3FFF;
+
+                        /* bogus EEM payload? */
+                        if (skb->len < len)
+                                return 0;
+
+                        /* bogus ethernet frame? */
+                        if (len < (ETH_HLEN + ETH_FCS_LEN))
+                                goto next;
+
+                        /*
+                         * Treat the last payload differently: framework
+                         * code expects our "fixup" to have stripped off
+                         * headers, so "skb" is a data packet (or error).
+                         * Else if it's not the last payload, keep "skb"
+                         * for further processing.
+                         */
+                        is_last = (len == skb->len);
+                        if (is_last)
+                                skb2 = skb;
+                        else {
+                                skb2 = skb_clone(skb, GFP_ATOMIC);
+                                if (unlikely(!skb2))
+                                        return 0;
+                        }
+
+                        crc = get_unaligned_le32(skb2->data
+                                        + len - ETH_FCS_LEN);
+                        skb_trim(skb2, len - ETH_FCS_LEN);
+
+                        /*
+                         * The bmCRC helps to denote when the CRC field in
+                         * the Ethernet frame contains a calculated CRC:
+                         *      bmCRC = 1       : CRC is calculated
+                         *      bmCRC = 0       : CRC = 0xDEADBEEF
+                         */
+                        if (header & BIT(14))
+                                crc2 = ~crc32_le(~0, skb2->data, len);
+                        else
+                                crc2 = 0xdeadbeef;
+
+                        if (is_last)
+                                return crc == crc2;
+
+                        if (unlikely(crc != crc2)) {
+                                dev->stats.rx_errors++;
+                                dev_kfree_skb_any(skb2);
+                        } else
+                                usbnet_skb_return(dev, skb2);
+                }
+
+next:
+                skb_pull(skb, len);
+        } while (skb->len);
+
+        return 1;
+}
+
+static const struct driver_info eem_info = {
+        .description =  "CDC EEM Device",
+        .flags =        FLAG_ETHER,
+        .bind =         eem_bind,
+        .rx_fixup =     eem_rx_fixup,
+        .tx_fixup =     eem_tx_fixup,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+{
+        USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM,
+                        USB_CDC_PROTO_EEM),
+        .driver_info = (unsigned long) &eem_info,
+},
+{
+        /* EMPTY == end of list */
+},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver eem_driver = {
+        .name =         "cdc_eem",
+        .id_table =     products,
+        .probe =        usbnet_probe,
+        .disconnect =   usbnet_disconnect,
+        .suspend =      usbnet_suspend,
+        .resume =       usbnet_resume,
+};
+
+
+static int __init eem_init(void)
+{
+        return usb_register(&eem_driver);
+}
+module_init(eem_init);
+
+static void __exit eem_exit(void)
+{
+        usb_deregister(&eem_driver);
+}
+module_exit(eem_exit);
+
+MODULE_AUTHOR("Omar Laazimani <omar.oberthur@gmail.com>");
+MODULE_DESCRIPTION("USB CDC EEM");
+MODULE_LICENSE("GPL");