tulip/uli526x.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME from logging messages
Add do {} while(0) to ULI526X_DBUG macro
Make SHOW_MEDIA_TYPE macro more readable

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 27 insertions, 19 deletions

diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index d549042a01df..dc3335d906f6 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -12,6 +12,8 @@
 
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define DRV_NAME        "uli526x"
 #define DRV_VERSION     "0.9.3"
 #define DRV_RELDATE     "2005-7-29"
@@ -82,9 +84,16 @@
 #define ULI526X_TX_TIMEOUT ((16*HZ)/2)  /* tx packet time-out time 8 s" */
 #define ULI526X_TX_KICK         (4*HZ/2)        /* tx packet Kick-out time 2 s" */
 
-#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
+#define ULI526X_DBUG(dbug_now, msg, value)                      \
+do {                                                            \
+        if (uli526x_debug || (dbug_now))                        \
+                pr_err("%s %lx\n", (msg), (long) (value));      \
+} while (0)
 
-#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+#define SHOW_MEDIA_TYPE(mode)                                   \
+        pr_err("Change Speed to %sMhz %s duplex\n",             \
+               mode & 1 ? "100" : "10",                         \
+               mode & 4 ? "full" : "half");
 
 
 /* CR9 definition: SROM/MII */
@@ -284,7 +293,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
         SET_NETDEV_DEV(dev, &pdev->dev);
 
         if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
-                printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+                pr_warning("32-bit PCI DMA not available\n");
                 err = -ENODEV;
                 goto err_out_free;
         }
@@ -295,19 +304,19 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
                 goto err_out_free;
 
         if (!pci_resource_start(pdev, 0)) {
-                printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+                pr_err("I/O base is zero\n");
                 err = -ENODEV;
                 goto err_out_disable;
         }
 
         if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
-                printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+                pr_err("Allocated I/O size too small\n");
                 err = -ENODEV;
                 goto err_out_disable;
         }
 
         if (pci_request_regions(pdev, DRV_NAME)) {
-                printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+                pr_err("Failed to request PCI regions\n");
                 err = -ENODEV;
                 goto err_out_disable;
         }
@@ -382,9 +391,9 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
         if (err)
                 goto err_out_res;
 
-        printk(KERN_INFO "%s: ULi M%04lx at pci%s, %pM, irq %d.\n",
-               dev->name,ent->driver_data >> 16,pci_name(pdev),
-               dev->dev_addr, dev->irq);
+        dev_info(&dev->dev, "ULi M%04lx at pci%s, %pM, irq %d\n",
+                 ent->driver_data >> 16, pci_name(pdev),
+                 dev->dev_addr, dev->irq);
 
         pci_set_master(pdev);
 
@@ -516,7 +525,7 @@ static void uli526x_init(struct net_device *dev)
                 }
         }
         if(phy_tmp == 32)
-                printk(KERN_WARNING "Can not find the phy address!!!");
+                pr_warning("Can not find the phy address!!!");
         /* Parser SROM and media mode */
         db->media_mode = uli526x_media_mode;
 
@@ -582,7 +591,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
 
         /* Too large packet check */
         if (skb->len > MAX_PACKET_SIZE) {
-                printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
+                pr_err("big packet = %d\n", (u16)skb->len);
                 dev_kfree_skb(skb);
                 return NETDEV_TX_OK;
         }
@@ -592,7 +601,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
         /* No Tx resource check, it never happen nromally */
         if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
                 spin_unlock_irqrestore(&db->lock, flags);
-                printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
+                pr_err("No Tx resource %ld\n", db->tx_packet_cnt);
                 return NETDEV_TX_BUSY;
         }
 
@@ -1058,7 +1067,7 @@ static void uli526x_timer(unsigned long data)
                 /* Link Failed */
                 ULI526X_DBUG(0, "Link Failed", tmp_cr12);
                 netif_carrier_off(dev);
-                printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+                pr_info("%s NIC Link is Down\n",dev->name);
                 db->link_failed = 1;
 
                 /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
@@ -1090,11 +1099,11 @@ static void uli526x_timer(unsigned long data)
                                 }
                                 if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
                                 {
-                                        printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
+                                        pr_info("%s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
                                 }
                                 else
                                 {
-                                        printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
+                                        pr_info("%s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
                                 }
                                 netif_carrier_on(dev);
                         }
@@ -1104,7 +1113,7 @@ static void uli526x_timer(unsigned long data)
                 {
                         if(db->init==1)
                         {
-                                printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+                                pr_info("%s NIC Link is Down\n",dev->name);
                                 netif_carrier_off(dev);
                         }
                 }
@@ -1230,8 +1239,7 @@ static int uli526x_resume(struct pci_dev *pdev)
 
         err = pci_set_power_state(pdev, PCI_D0);
         if (err) {
-                printk(KERN_WARNING "%s: Could not put device into D0\n",
-                        dev->name);
+                dev_warn(&dev->dev, "Could not put device into D0\n");
                 return err;
         }
 
@@ -1432,7 +1440,7 @@ static void send_filter_frame(struct net_device *dev, int mc_cnt)
                 update_cr6(db->cr6_data, dev->base_addr);
                 dev->trans_start = jiffies;
         } else
-                printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n");
+                pr_err("No Tx resource - Send_filter_frame!\n");
 }