Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1029 insertions, 0 deletions

diff --git a/drivers/net/tulip/de4x5.h b/drivers/net/tulip/de4x5.h
new file mode 100644
index 000000000000..ad37a4074302
--- /dev/null
+++ b/drivers/net/tulip/de4x5.h
@@ -0,0 +1,1029 @@
+/*
+    Copyright 1994 Digital Equipment Corporation.
+
+    This software may be used and distributed according to  the terms of the
+    GNU General Public License, incorporated herein by reference.
+
+    The author may    be  reached as davies@wanton.lkg.dec.com  or   Digital
+    Equipment Corporation, 550 King Street, Littleton MA 01460.
+
+    =========================================================================
+*/
+
+/*
+** DC21040 CSR<1..15> Register Address Map
+*/
+#define DE4X5_BMR    iobase+(0x000 << lp->bus)  /* Bus Mode Register */
+#define DE4X5_TPD    iobase+(0x008 << lp->bus)  /* Transmit Poll Demand Reg */
+#define DE4X5_RPD    iobase+(0x010 << lp->bus)  /* Receive Poll Demand Reg */
+#define DE4X5_RRBA   iobase+(0x018 << lp->bus)  /* RX Ring Base Address Reg */
+#define DE4X5_TRBA   iobase+(0x020 << lp->bus)  /* TX Ring Base Address Reg */
+#define DE4X5_STS    iobase+(0x028 << lp->bus)  /* Status Register */
+#define DE4X5_OMR    iobase+(0x030 << lp->bus)  /* Operation Mode Register */
+#define DE4X5_IMR    iobase+(0x038 << lp->bus)  /* Interrupt Mask Register */
+#define DE4X5_MFC    iobase+(0x040 << lp->bus)  /* Missed Frame Counter */
+#define DE4X5_APROM  iobase+(0x048 << lp->bus)  /* Ethernet Address PROM */
+#define DE4X5_BROM   iobase+(0x048 << lp->bus)  /* Boot ROM Register */
+#define DE4X5_SROM   iobase+(0x048 << lp->bus)  /* Serial ROM Register */
+#define DE4X5_MII    iobase+(0x048 << lp->bus)  /* MII Interface Register */
+#define DE4X5_DDR    iobase+(0x050 << lp->bus)  /* Data Diagnostic Register */
+#define DE4X5_FDR    iobase+(0x058 << lp->bus)  /* Full Duplex Register */
+#define DE4X5_GPT    iobase+(0x058 << lp->bus)  /* General Purpose Timer Reg.*/
+#define DE4X5_GEP    iobase+(0x060 << lp->bus)  /* General Purpose Register */
+#define DE4X5_SISR   iobase+(0x060 << lp->bus)  /* SIA Status Register */
+#define DE4X5_SICR   iobase+(0x068 << lp->bus)  /* SIA Connectivity Register */
+#define DE4X5_STRR   iobase+(0x070 << lp->bus)  /* SIA TX/RX Register */
+#define DE4X5_SIGR   iobase+(0x078 << lp->bus)  /* SIA General Register */
+
+/*
+** EISA Register Address Map
+*/
+#define EISA_ID      iobase+0x0c80   /* EISA ID Registers */ 
+#define EISA_ID0     iobase+0x0c80   /* EISA ID Register 0 */ 
+#define EISA_ID1     iobase+0x0c81   /* EISA ID Register 1 */ 
+#define EISA_ID2     iobase+0x0c82   /* EISA ID Register 2 */ 
+#define EISA_ID3     iobase+0x0c83   /* EISA ID Register 3 */ 
+#define EISA_CR      iobase+0x0c84   /* EISA Control Register */
+#define EISA_REG0    iobase+0x0c88   /* EISA Configuration Register 0 */
+#define EISA_REG1    iobase+0x0c89   /* EISA Configuration Register 1 */
+#define EISA_REG2    iobase+0x0c8a   /* EISA Configuration Register 2 */
+#define EISA_REG3    iobase+0x0c8f   /* EISA Configuration Register 3 */
+#define EISA_APROM   iobase+0x0c90   /* Ethernet Address PROM */
+
+/*
+** PCI/EISA Configuration Registers Address Map
+*/
+#define PCI_CFID     iobase+0x0008   /* PCI Configuration ID Register */
+#define PCI_CFCS     iobase+0x000c   /* PCI Command/Status Register */
+#define PCI_CFRV     iobase+0x0018   /* PCI Revision Register */
+#define PCI_CFLT     iobase+0x001c   /* PCI Latency Timer Register */
+#define PCI_CBIO     iobase+0x0028   /* PCI Base I/O Register */
+#define PCI_CBMA     iobase+0x002c   /* PCI Base Memory Address Register */
+#define PCI_CBER     iobase+0x0030   /* PCI Expansion ROM Base Address Reg. */
+#define PCI_CFIT     iobase+0x003c   /* PCI Configuration Interrupt Register */
+#define PCI_CFDA     iobase+0x0040   /* PCI Driver Area Register */
+#define PCI_CFDD     iobase+0x0041   /* PCI Driver Dependent Area Register */
+#define PCI_CFPM     iobase+0x0043   /* PCI Power Management Area Register */
+
+/*
+** EISA Configuration Register 0 bit definitions
+*/
+#define ER0_BSW       0x80           /* EISA Bus Slave Width, 1: 32 bits */
+#define ER0_BMW       0x40           /* EISA Bus Master Width, 1: 32 bits */
+#define ER0_EPT       0x20           /* EISA PREEMPT Time, 0: 23 BCLKs */
+#define ER0_ISTS      0x10           /* Interrupt Status (X) */
+#define ER0_LI        0x08           /* Latch Interrupts */
+#define ER0_INTL      0x06           /* INTerrupt Level */
+#define ER0_INTT      0x01           /* INTerrupt Type, 0: Level, 1: Edge */
+
+/*
+** EISA Configuration Register 1 bit definitions
+*/
+#define ER1_IAM       0xe0           /* ISA Address Mode */
+#define ER1_IAE       0x10           /* ISA Addressing Enable */
+#define ER1_UPIN      0x0f           /* User Pins */
+
+/*
+** EISA Configuration Register 2 bit definitions
+*/
+#define ER2_BRS       0xc0           /* Boot ROM Size */
+#define ER2_BRA       0x3c           /* Boot ROM Address <16:13> */
+
+/*
+** EISA Configuration Register 3 bit definitions
+*/
+#define ER3_BWE       0x40           /* Burst Write Enable */
+#define ER3_BRE       0x04           /* Burst Read Enable */
+#define ER3_LSR       0x02           /* Local Software Reset */
+
+/*
+** PCI Configuration ID Register (PCI_CFID). The Device IDs are left
+** shifted 8 bits to allow detection of DC21142 and DC21143 variants with
+** the configuration revision register step number.
+*/
+#define CFID_DID    0xff00           /* Device ID */
+#define CFID_VID    0x00ff           /* Vendor ID */
+#define DC21040_DID 0x0200           /* Unique Device ID # */
+#define DC21040_VID 0x1011           /* DC21040 Manufacturer */
+#define DC21041_DID 0x1400           /* Unique Device ID # */
+#define DC21041_VID 0x1011           /* DC21041 Manufacturer */
+#define DC21140_DID 0x0900           /* Unique Device ID # */
+#define DC21140_VID 0x1011           /* DC21140 Manufacturer */
+#define DC2114x_DID 0x1900           /* Unique Device ID # */
+#define DC2114x_VID 0x1011           /* DC2114[23] Manufacturer */
+
+/*
+** Chipset defines
+*/
+#define DC21040     DC21040_DID
+#define DC21041     DC21041_DID
+#define DC21140     DC21140_DID
+#define DC2114x     DC2114x_DID
+#define DC21142     (DC2114x_DID | 0x0010)
+#define DC21143     (DC2114x_DID | 0x0030)
+#define DC2114x_BRK 0x0020           /* CFRV break between DC21142 & DC21143 */
+
+#define is_DC21040 ((vendor == DC21040_VID) && (device == DC21040_DID))
+#define is_DC21041 ((vendor == DC21041_VID) && (device == DC21041_DID))
+#define is_DC21140 ((vendor == DC21140_VID) && (device == DC21140_DID))
+#define is_DC2114x ((vendor == DC2114x_VID) && (device == DC2114x_DID))
+#define is_DC21142 ((vendor == DC2114x_VID) && (device == DC21142))
+#define is_DC21143 ((vendor == DC2114x_VID) && (device == DC21143))
+
+/*
+** PCI Configuration Command/Status Register (PCI_CFCS)
+*/
+#define CFCS_DPE    0x80000000       /* Detected Parity Error (S) */
+#define CFCS_SSE    0x40000000       /* Signal System Error   (S) */
+#define CFCS_RMA    0x20000000       /* Receive Master Abort  (S) */
+#define CFCS_RTA    0x10000000       /* Receive Target Abort  (S) */
+#define CFCS_DST    0x06000000       /* DEVSEL Timing         (S) */
+#define CFCS_DPR    0x01000000       /* Data Parity Report    (S) */
+#define CFCS_FBB    0x00800000       /* Fast Back-To-Back     (S) */
+#define CFCS_SEE    0x00000100       /* System Error Enable   (C) */
+#define CFCS_PER    0x00000040       /* Parity Error Response (C) */
+#define CFCS_MO     0x00000004       /* Master Operation      (C) */
+#define CFCS_MSA    0x00000002       /* Memory Space Access   (C) */
+#define CFCS_IOSA   0x00000001       /* I/O Space Access      (C) */
+
+/*
+** PCI Configuration Revision Register (PCI_CFRV)
+*/
+#define CFRV_BC     0xff000000       /* Base Class */
+#define CFRV_SC     0x00ff0000       /* Subclass */
+#define CFRV_RN     0x000000f0       /* Revision Number */
+#define CFRV_SN     0x0000000f       /* Step Number */
+#define BASE_CLASS  0x02000000       /* Indicates Network Controller */
+#define SUB_CLASS   0x00000000       /* Indicates Ethernet Controller */
+#define STEP_NUMBER 0x00000020       /* Increments for future chips */
+#define REV_NUMBER  0x00000003       /* 0x00, 0x01, 0x02, 0x03: Rev in Step */
+#define CFRV_MASK   0xffff0000       /* Register mask */
+
+/*
+** PCI Configuration Latency Timer Register (PCI_CFLT)
+*/
+#define CFLT_BC     0x0000ff00       /* Latency Timer bits */
+
+/*
+** PCI Configuration Base I/O Address Register (PCI_CBIO)
+*/
+#define CBIO_MASK   -128             /* Base I/O Address Mask */
+#define CBIO_IOSI   0x00000001       /* I/O Space Indicator (RO, value is 1) */
+
+/*
+** PCI Configuration Card Information Structure Register (PCI_CCIS)
+*/
+#define CCIS_ROMI   0xf0000000       /* ROM Image */
+#define CCIS_ASO    0x0ffffff8       /* Address Space Offset */
+#define CCIS_ASI    0x00000007       /* Address Space Indicator */
+
+/*
+** PCI Configuration Subsystem ID Register (PCI_SSID)
+*/
+#define SSID_SSID   0xffff0000       /* Subsystem ID */
+#define SSID_SVID   0x0000ffff       /* Subsystem Vendor ID */
+
+/*
+** PCI Configuration Expansion ROM Base Address Register (PCI_CBER)
+*/
+#define CBER_MASK   0xfffffc00       /* Expansion ROM Base Address Mask */
+#define CBER_ROME   0x00000001       /* ROM Enable */
+
+/*
+** PCI Configuration Interrupt Register (PCI_CFIT)
+*/
+#define CFIT_MXLT   0xff000000       /* MAX_LAT Value (0.25us periods) */
+#define CFIT_MNGT   0x00ff0000       /* MIN_GNT Value (0.25us periods) */
+#define CFIT_IRQP   0x0000ff00       /* Interrupt Pin */
+#define CFIT_IRQL   0x000000ff       /* Interrupt Line */
+
+/*
+** PCI Configuration Power Management Area Register (PCI_CFPM)
+*/
+#define SLEEP       0x80             /* Power Saving Sleep Mode */
+#define SNOOZE      0x40             /* Power Saving Snooze Mode */
+#define WAKEUP      0x00             /* Power Saving Wakeup */
+
+#define PCI_CFDA_DSU 0x41            /* 8 bit Configuration Space Address */
+#define PCI_CFDA_PSM 0x43            /* 8 bit Configuration Space Address */
+
+/*
+** DC21040 Bus Mode Register (DE4X5_BMR)
+*/
+#define BMR_RML    0x00200000       /* [Memory] Read Multiple */
+#define BMR_DBO    0x00100000       /* Descriptor Byte Ordering (Endian) */
+#define BMR_TAP    0x000e0000       /* Transmit Automatic Polling */
+#define BMR_DAS    0x00010000       /* Diagnostic Address Space */
+#define BMR_CAL    0x0000c000       /* Cache Alignment */
+#define BMR_PBL    0x00003f00       /* Programmable Burst Length */
+#define BMR_BLE    0x00000080       /* Big/Little Endian */
+#define BMR_DSL    0x0000007c       /* Descriptor Skip Length */
+#define BMR_BAR    0x00000002       /* Bus ARbitration */
+#define BMR_SWR    0x00000001       /* Software Reset */
+
+                                    /* Timings here are for 10BASE-T/AUI only*/
+#define TAP_NOPOLL 0x00000000       /* No automatic polling */
+#define TAP_200US  0x00020000       /* TX automatic polling every 200us */
+#define TAP_800US  0x00040000       /* TX automatic polling every 800us */
+#define TAP_1_6MS  0x00060000       /* TX automatic polling every 1.6ms */
+#define TAP_12_8US 0x00080000       /* TX automatic polling every 12.8us */
+#define TAP_25_6US 0x000a0000       /* TX automatic polling every 25.6us */
+#define TAP_51_2US 0x000c0000       /* TX automatic polling every 51.2us */
+#define TAP_102_4US 0x000e0000      /* TX automatic polling every 102.4us */
+
+#define CAL_NOUSE  0x00000000       /* Not used */
+#define CAL_8LONG  0x00004000       /* 8-longword alignment */
+#define CAL_16LONG 0x00008000       /* 16-longword alignment */
+#define CAL_32LONG 0x0000c000       /* 32-longword alignment */
+
+#define PBL_0      0x00000000       /*  DMA burst length = amount in RX FIFO */
+#define PBL_1      0x00000100       /*  1 longword  DMA burst length */
+#define PBL_2      0x00000200       /*  2 longwords DMA burst length */
+#define PBL_4      0x00000400       /*  4 longwords DMA burst length */
+#define PBL_8      0x00000800       /*  8 longwords DMA burst length */
+#define PBL_16     0x00001000       /* 16 longwords DMA burst length */
+#define PBL_32     0x00002000       /* 32 longwords DMA burst length */
+
+#define DSL_0      0x00000000       /*  0 longword  / descriptor */
+#define DSL_1      0x00000004       /*  1 longword  / descriptor */
+#define DSL_2      0x00000008       /*  2 longwords / descriptor */
+#define DSL_4      0x00000010       /*  4 longwords / descriptor */
+#define DSL_8      0x00000020       /*  8 longwords / descriptor */
+#define DSL_16     0x00000040       /* 16 longwords / descriptor */
+#define DSL_32     0x00000080       /* 32 longwords / descriptor */
+
+/*
+** DC21040 Transmit Poll Demand Register (DE4X5_TPD)
+*/
+#define TPD        0x00000001       /* Transmit Poll Demand */
+
+/*
+** DC21040 Receive Poll Demand Register (DE4X5_RPD)
+*/
+#define RPD        0x00000001       /* Receive Poll Demand */
+
+/*
+** DC21040 Receive Ring Base Address Register (DE4X5_RRBA)
+*/
+#define RRBA       0xfffffffc       /* RX Descriptor List Start Address */
+
+/*
+** DC21040 Transmit Ring Base Address Register (DE4X5_TRBA)
+*/
+#define TRBA       0xfffffffc       /* TX Descriptor List Start Address */
+
+/*
+** Status Register (DE4X5_STS)
+*/
+#define STS_GPI    0x04000000       /* General Purpose Port Interrupt */
+#define STS_BE     0x03800000       /* Bus Error Bits */
+#define STS_TS     0x00700000       /* Transmit Process State */
+#define STS_RS     0x000e0000       /* Receive Process State */
+#define STS_NIS    0x00010000       /* Normal Interrupt Summary */
+#define STS_AIS    0x00008000       /* Abnormal Interrupt Summary */
+#define STS_ER     0x00004000       /* Early Receive */
+#define STS_FBE    0x00002000       /* Fatal Bus Error */
+#define STS_SE     0x00002000       /* System Error */
+#define STS_LNF    0x00001000       /* Link Fail */
+#define STS_FD     0x00000800       /* Full-Duplex Short Frame Received */
+#define STS_TM     0x00000800       /* Timer Expired (DC21041) */
+#define STS_ETI    0x00000400       /* Early Transmit Interrupt */
+#define STS_AT     0x00000400       /* AUI/TP Pin */
+#define STS_RWT    0x00000200       /* Receive Watchdog Time-Out */
+#define STS_RPS    0x00000100       /* Receive Process Stopped */
+#define STS_RU     0x00000080       /* Receive Buffer Unavailable */
+#define STS_RI     0x00000040       /* Receive Interrupt */
+#define STS_UNF    0x00000020       /* Transmit Underflow */
+#define STS_LNP    0x00000010       /* Link Pass */
+#define STS_ANC    0x00000010       /* Autonegotiation Complete */
+#define STS_TJT    0x00000008       /* Transmit Jabber Time-Out */
+#define STS_TU     0x00000004       /* Transmit Buffer Unavailable */
+#define STS_TPS    0x00000002       /* Transmit Process Stopped */
+#define STS_TI     0x00000001       /* Transmit Interrupt */
+
+#define EB_PAR     0x00000000       /* Parity Error */
+#define EB_MA      0x00800000       /* Master Abort */
+#define EB_TA      0x01000000       /* Target Abort */
+#define EB_RES0    0x01800000       /* Reserved */
+#define EB_RES1    0x02000000       /* Reserved */
+
+#define TS_STOP    0x00000000       /* Stopped */
+#define TS_FTD     0x00100000       /* Fetch Transmit Descriptor */
+#define TS_WEOT    0x00200000       /* Wait for End Of Transmission */
+#define TS_QDAT    0x00300000       /* Queue skb data into TX FIFO */
+#define TS_RES     0x00400000       /* Reserved */
+#define TS_SPKT    0x00500000       /* Setup Packet */
+#define TS_SUSP    0x00600000       /* Suspended */
+#define TS_CLTD    0x00700000       /* Close Transmit Descriptor */
+
+#define RS_STOP    0x00000000       /* Stopped */
+#define RS_FRD     0x00020000       /* Fetch Receive Descriptor */
+#define RS_CEOR    0x00040000       /* Check for End of Receive Packet */
+#define RS_WFRP    0x00060000       /* Wait for Receive Packet */
+#define RS_SUSP    0x00080000       /* Suspended */
+#define RS_CLRD    0x000a0000       /* Close Receive Descriptor */
+#define RS_FLUSH   0x000c0000       /* Flush RX FIFO */
+#define RS_QRFS    0x000e0000       /* Queue RX FIFO into RX Skb */
+
+#define INT_CANCEL 0x0001ffff       /* For zeroing all interrupt sources */
+
+/*
+** Operation Mode Register (DE4X5_OMR)
+*/
+#define OMR_SC     0x80000000       /* Special Capture Effect Enable */
+#define OMR_RA     0x40000000       /* Receive All */
+#define OMR_SDP    0x02000000       /* SD Polarity - MUST BE ASSERTED */
+#define OMR_SCR    0x01000000       /* Scrambler Mode */
+#define OMR_PCS    0x00800000       /* PCS Function */
+#define OMR_TTM    0x00400000       /* Transmit Threshold Mode */
+#define OMR_SF     0x00200000       /* Store and Forward */
+#define OMR_HBD    0x00080000       /* HeartBeat Disable */
+#define OMR_PS     0x00040000       /* Port Select */
+#define OMR_CA     0x00020000       /* Capture Effect Enable */
+#define OMR_BP     0x00010000       /* Back Pressure */
+#define OMR_TR     0x0000c000       /* Threshold Control Bits */
+#define OMR_ST     0x00002000       /* Start/Stop Transmission Command */
+#define OMR_FC     0x00001000       /* Force Collision Mode */
+#define OMR_OM     0x00000c00       /* Operating Mode */
+#define OMR_FDX    0x00000200       /* Full Duplex Mode */
+#define OMR_FKD    0x00000100       /* Flaky Oscillator Disable */
+#define OMR_PM     0x00000080       /* Pass All Multicast */
+#define OMR_PR     0x00000040       /* Promiscuous Mode */
+#define OMR_SB     0x00000020       /* Start/Stop Backoff Counter */
+#define OMR_IF     0x00000010       /* Inverse Filtering */
+#define OMR_PB     0x00000008       /* Pass Bad Frames */
+#define OMR_HO     0x00000004       /* Hash Only Filtering Mode */
+#define OMR_SR     0x00000002       /* Start/Stop Receive */
+#define OMR_HP     0x00000001       /* Hash/Perfect Receive Filtering Mode */
+
+#define TR_72      0x00000000       /* Threshold set to 72 (128) bytes */
+#define TR_96      0x00004000       /* Threshold set to 96 (256) bytes */
+#define TR_128     0x00008000       /* Threshold set to 128 (512) bytes */
+#define TR_160     0x0000c000       /* Threshold set to 160 (1024) bytes */
+
+#define OMR_DEF     (OMR_SDP)
+#define OMR_SIA     (OMR_SDP | OMR_TTM)
+#define OMR_SYM     (OMR_SDP | OMR_SCR | OMR_PCS | OMR_HBD | OMR_PS)
+#define OMR_MII_10  (OMR_SDP | OMR_TTM | OMR_PS)
+#define OMR_MII_100 (OMR_SDP | OMR_HBD | OMR_PS)
+
+/*
+** DC21040 Interrupt Mask Register (DE4X5_IMR)
+*/
+#define IMR_GPM    0x04000000       /* General Purpose Port Mask */
+#define IMR_NIM    0x00010000       /* Normal Interrupt Summary Mask */
+#define IMR_AIM    0x00008000       /* Abnormal Interrupt Summary Mask */
+#define IMR_ERM    0x00004000       /* Early Receive Mask */
+#define IMR_FBM    0x00002000       /* Fatal Bus Error Mask */
+#define IMR_SEM    0x00002000       /* System Error Mask */
+#define IMR_LFM    0x00001000       /* Link Fail Mask */
+#define IMR_FDM    0x00000800       /* Full-Duplex (Short Frame) Mask */
+#define IMR_TMM    0x00000800       /* Timer Expired Mask (DC21041) */
+#define IMR_ETM    0x00000400       /* Early Transmit Interrupt Mask */
+#define IMR_ATM    0x00000400       /* AUI/TP Switch Mask */
+#define IMR_RWM    0x00000200       /* Receive Watchdog Time-Out Mask */
+#define IMR_RSM    0x00000100       /* Receive Stopped Mask */
+#define IMR_RUM    0x00000080       /* Receive Buffer Unavailable Mask */
+#define IMR_RIM    0x00000040       /* Receive Interrupt Mask */
+#define IMR_UNM    0x00000020       /* Underflow Interrupt Mask */
+#define IMR_ANM    0x00000010       /* Autonegotiation Complete Mask */
+#define IMR_LPM    0x00000010       /* Link Pass */
+#define IMR_TJM    0x00000008       /* Transmit Time-Out Jabber Mask */
+#define IMR_TUM    0x00000004       /* Transmit Buffer Unavailable Mask */
+#define IMR_TSM    0x00000002       /* Transmission Stopped Mask */
+#define IMR_TIM    0x00000001       /* Transmit Interrupt Mask */
+
+/*
+** Missed Frames and FIFO Overflow Counters (DE4X5_MFC)
+*/
+#define MFC_FOCO   0x10000000       /* FIFO Overflow Counter Overflow Bit */
+#define MFC_FOC    0x0ffe0000       /* FIFO Overflow Counter Bits */
+#define MFC_OVFL   0x00010000       /* Missed Frames Counter Overflow Bit */
+#define MFC_CNTR   0x0000ffff       /* Missed Frames Counter Bits */
+#define MFC_FOCM   0x1ffe0000       /* FIFO Overflow Counter Mask */
+
+/*
+** DC21040 Ethernet Address PROM (DE4X5_APROM)
+*/
+#define APROM_DN   0x80000000       /* Data Not Valid */
+#define APROM_DT   0x000000ff       /* Address Byte */
+
+/*
+** DC21041 Boot/Ethernet Address ROM (DE4X5_BROM)
+*/
+#define BROM_MODE 0x00008000       /* MODE_1: 0,  MODE_0: 1  (read only) */
+#define BROM_RD   0x00004000       /* Read from Boot ROM */
+#define BROM_WR   0x00002000       /* Write to Boot ROM */
+#define BROM_BR   0x00001000       /* Select Boot ROM when set */
+#define BROM_SR   0x00000800       /* Select Serial ROM when set */
+#define BROM_REG  0x00000400       /* External Register Select */
+#define BROM_DT   0x000000ff       /* Data Byte */
+
+/*
+** DC21041 Serial/Ethernet Address ROM (DE4X5_SROM, DE4X5_MII)
+*/
+#define MII_MDI   0x00080000       /* MII Management Data In */
+#define MII_MDO   0x00060000       /* MII Management Mode/Data Out */
+#define MII_MRD   0x00040000       /* MII Management Define Read Mode */
+#define MII_MWR   0x00000000       /* MII Management Define Write Mode */
+#define MII_MDT   0x00020000       /* MII Management Data Out */
+#define MII_MDC   0x00010000       /* MII Management Clock */
+#define MII_RD    0x00004000       /* Read from MII */
+#define MII_WR    0x00002000       /* Write to MII */
+#define MII_SEL   0x00000800       /* Select MII when RESET */
+
+#define SROM_MODE 0x00008000       /* MODE_1: 0,  MODE_0: 1  (read only) */
+#define SROM_RD   0x00004000       /* Read from Boot ROM */
+#define SROM_WR   0x00002000       /* Write to Boot ROM */
+#define SROM_BR   0x00001000       /* Select Boot ROM when set */
+#define SROM_SR   0x00000800       /* Select Serial ROM when set */
+#define SROM_REG  0x00000400       /* External Register Select */
+#define SROM_DT   0x000000ff       /* Data Byte */
+
+#define DT_OUT    0x00000008       /* Serial Data Out */
+#define DT_IN     0x00000004       /* Serial Data In */
+#define DT_CLK    0x00000002       /* Serial ROM Clock */
+#define DT_CS     0x00000001       /* Serial ROM Chip Select */
+
+#define MII_PREAMBLE 0xffffffff    /* MII Management Preamble */
+#define MII_TEST     0xaaaaaaaa    /* MII Test Signal */
+#define MII_STRD     0x06          /* Start of Frame+Op Code: use low nibble */
+#define MII_STWR     0x0a          /* Start of Frame+Op Code: use low nibble */
+
+#define MII_CR       0x00          /* MII Management Control Register */
+#define MII_SR       0x01          /* MII Management Status Register */
+#define MII_ID0      0x02          /* PHY Identifier Register 0 */
+#define MII_ID1      0x03          /* PHY Identifier Register 1 */
+#define MII_ANA      0x04          /* Auto Negotiation Advertisement */
+#define MII_ANLPA    0x05          /* Auto Negotiation Link Partner Ability */
+#define MII_ANE      0x06          /* Auto Negotiation Expansion */
+#define MII_ANP      0x07          /* Auto Negotiation Next Page TX */
+
+#define DE4X5_MAX_MII 32           /* Maximum address of MII PHY devices */
+
+/*
+** MII Management Control Register
+*/
+#define MII_CR_RST  0x8000         /* RESET the PHY chip */
+#define MII_CR_LPBK 0x4000         /* Loopback enable */
+#define MII_CR_SPD  0x2000         /* 0: 10Mb/s; 1: 100Mb/s */
+#define MII_CR_10   0x0000         /* Set 10Mb/s */
+#define MII_CR_100  0x2000         /* Set 100Mb/s */
+#define MII_CR_ASSE 0x1000         /* Auto Speed Select Enable */
+#define MII_CR_PD   0x0800         /* Power Down */
+#define MII_CR_ISOL 0x0400         /* Isolate Mode */
+#define MII_CR_RAN  0x0200         /* Restart Auto Negotiation */
+#define MII_CR_FDM  0x0100         /* Full Duplex Mode */
+#define MII_CR_CTE  0x0080         /* Collision Test Enable */
+
+/*
+** MII Management Status Register
+*/
+#define MII_SR_T4C  0x8000         /* 100BASE-T4 capable */
+#define MII_SR_TXFD 0x4000         /* 100BASE-TX Full Duplex capable */
+#define MII_SR_TXHD 0x2000         /* 100BASE-TX Half Duplex capable */
+#define MII_SR_TFD  0x1000         /* 10BASE-T Full Duplex capable */
+#define MII_SR_THD  0x0800         /* 10BASE-T Half Duplex capable */
+#define MII_SR_ASSC 0x0020         /* Auto Speed Selection Complete*/
+#define MII_SR_RFD  0x0010         /* Remote Fault Detected */
+#define MII_SR_ANC  0x0008         /* Auto Negotiation capable */
+#define MII_SR_LKS  0x0004         /* Link Status */
+#define MII_SR_JABD 0x0002         /* Jabber Detect */
+#define MII_SR_XC   0x0001         /* Extended Capabilities */
+
+/*
+** MII Management Auto Negotiation Advertisement Register
+*/
+#define MII_ANA_TAF  0x03e0        /* Technology Ability Field */
+#define MII_ANA_T4AM 0x0200        /* T4 Technology Ability Mask */
+#define MII_ANA_TXAM 0x0180        /* TX Technology Ability Mask */
+#define MII_ANA_FDAM 0x0140        /* Full Duplex Technology Ability Mask */
+#define MII_ANA_HDAM 0x02a0        /* Half Duplex Technology Ability Mask */
+#define MII_ANA_100M 0x0380        /* 100Mb Technology Ability Mask */
+#define MII_ANA_10M  0x0060        /* 10Mb Technology Ability Mask */
+#define MII_ANA_CSMA 0x0001        /* CSMA-CD Capable */
+
+/*
+** MII Management Auto Negotiation Remote End Register
+*/
+#define MII_ANLPA_NP   0x8000      /* Next Page (Enable) */
+#define MII_ANLPA_ACK  0x4000      /* Remote Acknowledge */
+#define MII_ANLPA_RF   0x2000      /* Remote Fault */
+#define MII_ANLPA_TAF  0x03e0      /* Technology Ability Field */
+#define MII_ANLPA_T4AM 0x0200      /* T4 Technology Ability Mask */
+#define MII_ANLPA_TXAM 0x0180      /* TX Technology Ability Mask */
+#define MII_ANLPA_FDAM 0x0140      /* Full Duplex Technology Ability Mask */
+#define MII_ANLPA_HDAM 0x02a0      /* Half Duplex Technology Ability Mask */
+#define MII_ANLPA_100M 0x0380      /* 100Mb Technology Ability Mask */
+#define MII_ANLPA_10M  0x0060      /* 10Mb Technology Ability Mask */
+#define MII_ANLPA_CSMA 0x0001      /* CSMA-CD Capable */
+
+/*
+** SROM Media Definitions (ABG SROM Section)
+*/
+#define MEDIA_NWAY     0x0080      /* Nway (Auto Negotiation) on PHY */
+#define MEDIA_MII      0x0040      /* MII Present on the adapter */
+#define MEDIA_FIBRE    0x0008      /* Fibre Media present */
+#define MEDIA_AUI      0x0004      /* AUI Media present */
+#define MEDIA_TP       0x0002      /* TP Media present */
+#define MEDIA_BNC      0x0001      /* BNC Media present */
+
+/*
+** SROM Definitions (Digital Semiconductor Format)
+*/
+#define SROM_SSVID     0x0000      /* Sub-system Vendor ID offset */
+#define SROM_SSID      0x0002      /* Sub-system ID offset */
+#define SROM_CISPL     0x0004      /* CardBus CIS Pointer low offset */
+#define SROM_CISPH     0x0006      /* CardBus CIS Pointer high offset */
+#define SROM_IDCRC     0x0010      /* ID Block CRC offset*/
+#define SROM_RSVD2     0x0011      /* ID Reserved 2 offset */
+#define SROM_SFV       0x0012      /* SROM Format Version offset */
+#define SROM_CCNT      0x0013      /* Controller Count offset */
+#define SROM_HWADD     0x0014      /* Hardware Address offset */
+#define SROM_MRSVD     0x007c      /* Manufacturer Reserved offset*/
+#define SROM_CRC       0x007e      /* SROM CRC offset */
+
+/*
+** SROM Media Connection Definitions
+*/
+#define SROM_10BT      0x0000      /*  10BASE-T half duplex */
+#define SROM_10BTN     0x0100      /*  10BASE-T with Nway */
+#define SROM_10BTF     0x0204      /*  10BASE-T full duplex */
+#define SROM_10BTNLP   0x0400      /*  10BASE-T without Link Pass test */
+#define SROM_10B2      0x0001      /*  10BASE-2 (BNC) */
+#define SROM_10B5      0x0002      /*  10BASE-5 (AUI) */
+#define SROM_100BTH    0x0003      /*  100BASE-T half duplex */
+#define SROM_100BTF    0x0205      /*  100BASE-T full duplex */
+#define SROM_100BT4    0x0006      /*  100BASE-T4 */
+#define SROM_100BFX    0x0007      /*  100BASE-FX half duplex (Fiber) */
+#define SROM_M10BT     0x0009      /*  MII 10BASE-T half duplex */
+#define SROM_M10BTF    0x020a      /*  MII 10BASE-T full duplex */
+#define SROM_M100BT    0x000d      /*  MII 100BASE-T half duplex */
+#define SROM_M100BTF   0x020e      /*  MII 100BASE-T full duplex */
+#define SROM_M100BT4   0x000f      /*  MII 100BASE-T4 */
+#define SROM_M100BF    0x0010      /*  MII 100BASE-FX half duplex */
+#define SROM_M100BFF   0x0211      /*  MII 100BASE-FX full duplex */
+#define SROM_PDA       0x0800      /*  Powerup & Dynamic Autosense */
+#define SROM_PAO       0x8800      /*  Powerup Autosense Only */
+#define SROM_NSMI      0xffff      /*  No Selected Media Information */
+
+/*
+** SROM Media Definitions
+*/
+#define SROM_10BASET   0x0000      /*  10BASE-T half duplex */
+#define SROM_10BASE2   0x0001      /*  10BASE-2 (BNC) */
+#define SROM_10BASE5   0x0002      /*  10BASE-5 (AUI) */
+#define SROM_100BASET  0x0003      /*  100BASE-T half duplex */
+#define SROM_10BASETF  0x0004      /*  10BASE-T full duplex */
+#define SROM_100BASETF 0x0005      /*  100BASE-T full duplex */
+#define SROM_100BASET4 0x0006      /*  100BASE-T4 */
+#define SROM_100BASEF  0x0007      /*  100BASE-FX half duplex */
+#define SROM_100BASEFF 0x0008      /*  100BASE-FX full duplex */
+
+#define BLOCK_LEN      0x7f        /* Extended blocks length mask */
+#define EXT_FIELD      0x40        /* Extended blocks extension field bit */
+#define MEDIA_CODE     0x3f        /* Extended blocks media code mask */
+
+/*
+** SROM Compact Format Block Masks
+*/
+#define COMPACT_FI      0x80       /* Format Indicator */
+#define COMPACT_LEN     0x04       /* Length */
+#define COMPACT_MC      0x3f       /* Media Code */
+
+/*
+** SROM Extended Format Block Type 0 Masks
+*/
+#define BLOCK0_FI      0x80        /* Format Indicator */
+#define BLOCK0_MCS     0x80        /* Media Code byte Sign */
+#define BLOCK0_MC      0x3f        /* Media Code */
+
+/*
+** DC21040 Full Duplex Register (DE4X5_FDR)
+*/
+#define FDR_FDACV  0x0000ffff      /* Full Duplex Auto Configuration Value */
+
+/*
+** DC21041 General Purpose Timer Register (DE4X5_GPT)
+*/
+#define GPT_CON  0x00010000        /* One shot: 0,  Continuous: 1 */
+#define GPT_VAL  0x0000ffff        /* Timer Value */
+
+/*
+** DC21140 General Purpose Register (DE4X5_GEP) (hardware dependent bits)
+*/
+/* Valid ONLY for DE500 hardware */
+#define GEP_LNP  0x00000080        /* Link Pass               (input)        */
+#define GEP_SLNK 0x00000040        /* SYM LINK                (input)        */
+#define GEP_SDET 0x00000020        /* Signal Detect           (input)        */
+#define GEP_HRST 0x00000010        /* Hard RESET (to PHY)     (output)       */
+#define GEP_FDXD 0x00000008        /* Full Duplex Disable     (output)       */
+#define GEP_PHYL 0x00000004        /* PHY Loopback            (output)       */
+#define GEP_FLED 0x00000002        /* Force Activity LED on   (output)       */
+#define GEP_MODE 0x00000001        /* 0: 10Mb/s,  1: 100Mb/s                 */
+#define GEP_INIT 0x0000011f        /* Setup inputs (0) and outputs (1)       */
+#define GEP_CTRL 0x00000100        /* GEP control bit                        */
+
+/*
+** SIA Register Defaults
+*/
+#define CSR13 0x00000001
+#define CSR14 0x0003ff7f           /* Autonegotiation disabled               */
+#define CSR15 0x00000008
+
+/*
+** SIA Status Register (DE4X5_SISR)
+*/
+#define SISR_LPC   0xffff0000      /* Link Partner's Code Word               */
+#define SISR_LPN   0x00008000      /* Link Partner Negotiable                */
+#define SISR_ANS   0x00007000      /* Auto Negotiation Arbitration State     */
+#define SISR_NSN   0x00000800      /* Non Stable NLPs Detected (DC21041)     */
+#define SISR_TRF   0x00000800      /* Transmit Remote Fault                  */
+#define SISR_NSND  0x00000400      /* Non Stable NLPs Detected (DC21142)     */
+#define SISR_ANR_FDS 0x00000400    /* Auto Negotiate Restart/Full Duplex Sel.*/
+#define SISR_TRA   0x00000200      /* 10BASE-T Receive Port Activity         */
+#define SISR_NRA   0x00000200      /* Non Selected Port Receive Activity     */
+#define SISR_ARA   0x00000100      /* AUI Receive Port Activity              */
+#define SISR_SRA   0x00000100      /* Selected Port Receive Activity         */
+#define SISR_DAO   0x00000080      /* PLL All One                            */
+#define SISR_DAZ   0x00000040      /* PLL All Zero                           */
+#define SISR_DSP   0x00000020      /* PLL Self-Test Pass                     */
+#define SISR_DSD   0x00000010      /* PLL Self-Test Done                     */
+#define SISR_APS   0x00000008      /* Auto Polarity State                    */
+#define SISR_LKF   0x00000004      /* Link Fail Status                       */
+#define SISR_LS10  0x00000004      /* 10Mb/s Link Fail Status                */
+#define SISR_NCR   0x00000002      /* Network Connection Error               */
+#define SISR_LS100 0x00000002      /* 100Mb/s Link Fail Status               */
+#define SISR_PAUI  0x00000001      /* AUI_TP Indication                      */
+#define SISR_MRA   0x00000001      /* MII Receive Port Activity              */
+
+#define ANS_NDIS   0x00000000      /* Nway disable                           */
+#define ANS_TDIS   0x00001000      /* Transmit Disable                       */
+#define ANS_ADET   0x00002000      /* Ability Detect                         */
+#define ANS_ACK    0x00003000      /* Acknowledge                            */
+#define ANS_CACK   0x00004000      /* Complete Acknowledge                   */
+#define ANS_NWOK   0x00005000      /* Nway OK - FLP Link Good                */
+#define ANS_LCHK   0x00006000      /* Link Check                             */
+
+#define SISR_RST   0x00000301      /* CSR12 reset                            */
+#define SISR_ANR   0x00001301      /* Autonegotiation restart                */
+
+/*
+** SIA Connectivity Register (DE4X5_SICR)
+*/
+#define SICR_SDM   0xffff0000       /* SIA Diagnostics Mode */
+#define SICR_OE57  0x00008000       /* Output Enable 5 6 7 */
+#define SICR_OE24  0x00004000       /* Output Enable 2 4 */
+#define SICR_OE13  0x00002000       /* Output Enable 1 3 */
+#define SICR_IE    0x00001000       /* Input Enable */
+#define SICR_EXT   0x00000000       /* SIA MUX Select External SIA Mode */
+#define SICR_D_SIA 0x00000400       /* SIA MUX Select Diagnostics - SIA Sigs */
+#define SICR_DPLL  0x00000800       /* SIA MUX Select Diagnostics - DPLL Sigs*/
+#define SICR_APLL  0x00000a00       /* SIA MUX Select Diagnostics - DPLL Sigs*/
+#define SICR_D_RxM 0x00000c00       /* SIA MUX Select Diagnostics - RxM Sigs */
+#define SICR_M_RxM 0x00000d00       /* SIA MUX Select Diagnostics - RxM Sigs */
+#define SICR_LNKT  0x00000e00       /* SIA MUX Select Diagnostics - Link Test*/
+#define SICR_SEL   0x00000f00       /* SIA MUX Select AUI or TP with LEDs */
+#define SICR_ASE   0x00000080       /* APLL Start Enable*/
+#define SICR_SIM   0x00000040       /* Serial Interface Input Multiplexer */
+#define SICR_ENI   0x00000020       /* Encoder Input Multiplexer */
+#define SICR_EDP   0x00000010       /* SIA PLL External Input Enable */
+#define SICR_AUI   0x00000008       /* 10Base-T (0) or AUI (1) */
+#define SICR_CAC   0x00000004       /* CSR Auto Configuration */
+#define SICR_PS    0x00000002       /* Pin AUI/TP Selection */
+#define SICR_SRL   0x00000001       /* SIA Reset */
+#define SIA_RESET  0x00000000       /* SIA Reset Value */
+
+/*
+** SIA Transmit and Receive Register (DE4X5_STRR)
+*/
+#define STRR_TAS   0x00008000       /* 10Base-T/AUI Autosensing Enable */
+#define STRR_SPP   0x00004000       /* Set Polarity Plus */
+#define STRR_APE   0x00002000       /* Auto Polarity Enable */
+#define STRR_LTE   0x00001000       /* Link Test Enable */
+#define STRR_SQE   0x00000800       /* Signal Quality Enable */
+#define STRR_CLD   0x00000400       /* Collision Detect Enable */
+#define STRR_CSQ   0x00000200       /* Collision Squelch Enable */
+#define STRR_RSQ   0x00000100       /* Receive Squelch Enable */
+#define STRR_ANE   0x00000080       /* Auto Negotiate Enable */
+#define STRR_HDE   0x00000040       /* Half Duplex Enable */
+#define STRR_CPEN  0x00000030       /* Compensation Enable */
+#define STRR_LSE   0x00000008       /* Link Pulse Send Enable */
+#define STRR_DREN  0x00000004       /* Driver Enable */
+#define STRR_LBK   0x00000002       /* Loopback Enable */
+#define STRR_ECEN  0x00000001       /* Encoder Enable */
+#define STRR_RESET 0xffffffff       /* Reset value for STRR */
+
+/*
+** SIA General Register (DE4X5_SIGR)
+*/
+#define SIGR_RMI   0x40000000       /* Receive Match Interrupt */
+#define SIGR_GI1   0x20000000       /* General Port Interrupt 1 */
+#define SIGR_GI0   0x10000000       /* General Port Interrupt 0 */
+#define SIGR_CWE   0x08000000       /* Control Write Enable */
+#define SIGR_RME   0x04000000       /* Receive Match Enable */
+#define SIGR_GEI1  0x02000000       /* GEP Interrupt Enable on Port 1 */
+#define SIGR_GEI0  0x01000000       /* GEP Interrupt Enable on Port 0 */
+#define SIGR_LGS3  0x00800000       /* LED/GEP3 Select */
+#define SIGR_LGS2  0x00400000       /* LED/GEP2 Select */
+#define SIGR_LGS1  0x00200000       /* LED/GEP1 Select */
+#define SIGR_LGS0  0x00100000       /* LED/GEP0 Select */
+#define SIGR_MD    0x000f0000       /* General Purpose Mode and Data */
+#define SIGR_LV2   0x00008000       /* General Purpose LED2 value */
+#define SIGR_LE2   0x00004000       /* General Purpose LED2 enable */
+#define SIGR_FRL   0x00002000       /* Force Receiver Low */
+#define SIGR_DPST  0x00001000       /* PLL Self Test Start */
+#define SIGR_LSD   0x00000800       /* LED Stretch Disable */
+#define SIGR_FLF   0x00000400       /* Force Link Fail */
+#define SIGR_FUSQ  0x00000200       /* Force Unsquelch */
+#define SIGR_TSCK  0x00000100       /* Test Clock */
+#define SIGR_LV1   0x00000080       /* General Purpose LED1 value */
+#define SIGR_LE1   0x00000040       /* General Purpose LED1 enable */
+#define SIGR_RWR   0x00000020       /* Receive Watchdog Release */
+#define SIGR_RWD   0x00000010       /* Receive Watchdog Disable */
+#define SIGR_ABM   0x00000008       /* BNC: 0,  AUI:1 */
+#define SIGR_JCK   0x00000004       /* Jabber Clock */
+#define SIGR_HUJ   0x00000002       /* Host Unjab */
+#define SIGR_JBD   0x00000001       /* Jabber Disable */
+#define SIGR_RESET 0xffff0000       /* Reset value for SIGR */
+
+/*
+** Receive Descriptor Bit Summary
+*/
+#define R_OWN      0x80000000       /* Own Bit */
+#define RD_FF      0x40000000       /* Filtering Fail */
+#define RD_FL      0x3fff0000       /* Frame Length */
+#define RD_ES      0x00008000       /* Error Summary */
+#define RD_LE      0x00004000       /* Length Error */
+#define RD_DT      0x00003000       /* Data Type */
+#define RD_RF      0x00000800       /* Runt Frame */
+#define RD_MF      0x00000400       /* Multicast Frame */
+#define RD_FS      0x00000200       /* First Descriptor */
+#define RD_LS      0x00000100       /* Last Descriptor */
+#define RD_TL      0x00000080       /* Frame Too Long */
+#define RD_CS      0x00000040       /* Collision Seen */
+#define RD_FT      0x00000020       /* Frame Type */
+#define RD_RJ      0x00000010       /* Receive Watchdog */
+#define RD_RE      0x00000008       /* Report on MII Error */
+#define RD_DB      0x00000004       /* Dribbling Bit */
+#define RD_CE      0x00000002       /* CRC Error */
+#define RD_OF      0x00000001       /* Overflow */
+
+#define RD_RER     0x02000000       /* Receive End Of Ring */
+#define RD_RCH     0x01000000       /* Second Address Chained */
+#define RD_RBS2    0x003ff800       /* Buffer 2 Size */
+#define RD_RBS1    0x000007ff       /* Buffer 1 Size */
+
+/*
+** Transmit Descriptor Bit Summary
+*/
+#define T_OWN      0x80000000       /* Own Bit */
+#define TD_ES      0x00008000       /* Error Summary */
+#define TD_TO      0x00004000       /* Transmit Jabber Time-Out */
+#define TD_LO      0x00000800       /* Loss Of Carrier */
+#define TD_NC      0x00000400       /* No Carrier */
+#define TD_LC      0x00000200       /* Late Collision */
+#define TD_EC      0x00000100       /* Excessive Collisions */
+#define TD_HF      0x00000080       /* Heartbeat Fail */
+#define TD_CC      0x00000078       /* Collision Counter */
+#define TD_LF      0x00000004       /* Link Fail */
+#define TD_UF      0x00000002       /* Underflow Error */
+#define TD_DE      0x00000001       /* Deferred */
+
+#define TD_IC      0x80000000       /* Interrupt On Completion */
+#define TD_LS      0x40000000       /* Last Segment */
+#define TD_FS      0x20000000       /* First Segment */
+#define TD_FT1     0x10000000       /* Filtering Type */
+#define TD_SET     0x08000000       /* Setup Packet */
+#define TD_AC      0x04000000       /* Add CRC Disable */
+#define TD_TER     0x02000000       /* Transmit End Of Ring */
+#define TD_TCH     0x01000000       /* Second Address Chained */
+#define TD_DPD     0x00800000       /* Disabled Padding */
+#define TD_FT0     0x00400000       /* Filtering Type */
+#define TD_TBS2    0x003ff800       /* Buffer 2 Size */
+#define TD_TBS1    0x000007ff       /* Buffer 1 Size */
+
+#define PERFECT_F  0x00000000
+#define HASH_F     TD_FT0
+#define INVERSE_F  TD_FT1
+#define HASH_O_F   (TD_FT1 | TD_F0)
+
+/*
+** Media / mode state machine definitions
+** User selectable:
+*/
+#define TP              0x0040     /* 10Base-T (now equiv to _10Mb)        */
+#define TP_NW           0x0002     /* 10Base-T with Nway                   */
+#define BNC             0x0004     /* Thinwire                             */
+#define AUI             0x0008     /* Thickwire                            */
+#define BNC_AUI         0x0010     /* BNC/AUI on DC21040 indistinguishable */
+#define _10Mb           0x0040     /* 10Mb/s Ethernet                      */
+#define _100Mb          0x0080     /* 100Mb/s Ethernet                     */
+#define AUTO            0x4000     /* Auto sense the media or speed        */
+
+/*
+** Internal states
+*/
+#define NC              0x0000     /* No Connection                        */
+#define ANS             0x0020     /* Intermediate AutoNegotiation State   */
+#define SPD_DET         0x0100     /* Parallel speed detection             */
+#define INIT            0x0200     /* Initial state                        */
+#define EXT_SIA         0x0400     /* External SIA for motherboard chip    */
+#define ANS_SUSPECT     0x0802     /* Suspect the ANS (TP) port is down    */
+#define TP_SUSPECT      0x0803     /* Suspect the TP port is down          */
+#define BNC_AUI_SUSPECT 0x0804     /* Suspect the BNC or AUI port is down  */
+#define EXT_SIA_SUSPECT 0x0805     /* Suspect the EXT SIA port is down     */
+#define BNC_SUSPECT     0x0806     /* Suspect the BNC port is down         */
+#define AUI_SUSPECT     0x0807     /* Suspect the AUI port is down         */
+#define MII             0x1000     /* MII on the 21143                     */
+
+#define TIMER_CB        0x80000000 /* Timer callback detection             */
+
+/*
+** DE4X5 DEBUG Options
+*/
+#define DEBUG_NONE      0x0000     /* No DEBUG messages */
+#define DEBUG_VERSION   0x0001     /* Print version message */
+#define DEBUG_MEDIA     0x0002     /* Print media messages */
+#define DEBUG_TX        0x0004     /* Print TX (queue_pkt) messages */
+#define DEBUG_RX        0x0008     /* Print RX (de4x5_rx) messages */
+#define DEBUG_SROM      0x0010     /* Print SROM messages */
+#define DEBUG_MII       0x0020     /* Print MII messages */
+#define DEBUG_OPEN      0x0040     /* Print de4x5_open() messages */
+#define DEBUG_CLOSE     0x0080     /* Print de4x5_close() messages */
+#define DEBUG_PCICFG    0x0100
+#define DEBUG_ALL       0x01ff
+
+/*
+** Miscellaneous
+*/
+#define PCI  0
+#define EISA 1
+
+#define HASH_TABLE_LEN   512       /* Bits */
+#define HASH_BITS        0x01ff    /* 9 LS bits */
+
+#define SETUP_FRAME_LEN  192       /* Bytes */
+#define IMPERF_PA_OFFSET 156       /* Bytes */
+
+#define POLL_DEMAND          1
+
+#define LOST_MEDIA_THRESHOLD 3
+
+#define MASK_INTERRUPTS      1
+#define UNMASK_INTERRUPTS    0
+
+#define DE4X5_STRLEN         8
+
+#define DE4X5_INIT           0     /* Initialisation time */
+#define DE4X5_RUN            1     /* Run time */
+
+#define DE4X5_SAVE_STATE     0
+#define DE4X5_RESTORE_STATE  1
+
+/*
+** Address Filtering Modes
+*/
+#define PERFECT              0     /* 16 perfect physical addresses */
+#define HASH_PERF            1     /* 1 perfect, 512 multicast addresses */
+#define PERFECT_REJ          2     /* Reject 16 perfect physical addresses */
+#define ALL_HASH             3     /* Hashes all physical & multicast addrs */
+
+#define ALL                  0     /* Clear out all the setup frame */
+#define PHYS_ADDR_ONLY       1     /* Update the physical address only */
+
+/*
+** Booleans
+*/
+#define NO                   0
+#define FALSE                0
+
+#define YES                  ~0
+#define TRUE                 ~0
+
+/*
+** Adapter state
+*/
+#define INITIALISED          0     /* After h/w initialised and mem alloc'd */
+#define CLOSED               1     /* Ready for opening */
+#define OPEN                 2     /* Running */
+
+/*
+** Various wait times
+*/
+#define PDET_LINK_WAIT    1200    /* msecs to wait for link detect bits     */
+#define ANS_FINISH_WAIT   1000    /* msecs to wait for link detect bits     */
+
+/*
+** IEEE OUIs for various PHY vendor/chip combos - Reg 2 values only. Since
+** the vendors seem split 50-50 on how to calculate the OUI register values
+** anyway, just reading Reg2 seems reasonable for now [see de4x5_get_oui()].
+*/
+#define NATIONAL_TX 0x2000
+#define BROADCOM_T4 0x03e0
+#define SEEQ_T4     0x0016
+#define CYPRESS_T4  0x0014
+
+/*
+** Speed Selection stuff
+*/
+#define SET_10Mb {\
+  if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\
+    omr = inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX);\
+    if ((lp->tmp != MII_SR_ASSC) || (lp->autosense != AUTO)) {\
+      mii_wr(MII_CR_10|(lp->fdx?MII_CR_FDM:0), MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
+    }\
+    omr |= ((lp->fdx ? OMR_FDX : 0) | OMR_TTM);\
+    outl(omr, DE4X5_OMR);\
+    if (!lp->useSROM) lp->cache.gep = 0;\
+  } else if (lp->useSROM && !lp->useMII) {\
+    omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    omr |= (lp->fdx ? OMR_FDX : 0);\
+    outl(omr | (lp->infoblock_csr6 & ~(OMR_SCR | OMR_HBD)), DE4X5_OMR);\
+  } else {\
+    omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    omr |= (lp->fdx ? OMR_FDX : 0);\
+    outl(omr | OMR_SDP | OMR_TTM, DE4X5_OMR);\
+    lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD);\
+    gep_wr(lp->cache.gep, dev);\
+  }\
+}
+
+#define SET_100Mb {\
+  if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\
+    int fdx=0;\
+    if (lp->phy[lp->active].id == NATIONAL_TX) {\
+        mii_wr(mii_rd(0x18, lp->phy[lp->active].addr, DE4X5_MII) & ~0x2000,\
+                      0x18, lp->phy[lp->active].addr, DE4X5_MII);\
+    }\
+    omr = inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX);\
+    sr = mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);\
+    if (!(sr & MII_ANA_T4AM) && lp->fdx) fdx=1;\
+    if ((lp->tmp != MII_SR_ASSC) || (lp->autosense != AUTO)) {\
+      mii_wr(MII_CR_100|(fdx?MII_CR_FDM:0), MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
+    }\
+    if (fdx) omr |= OMR_FDX;\
+    outl(omr, DE4X5_OMR);\
+    if (!lp->useSROM) lp->cache.gep = 0;\
+  } else if (lp->useSROM && !lp->useMII) {\
+    omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    omr |= (lp->fdx ? OMR_FDX : 0);\
+    outl(omr | lp->infoblock_csr6, DE4X5_OMR);\
+  } else {\
+    omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    omr |= (lp->fdx ? OMR_FDX : 0);\
+    outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS | OMR_SCR, DE4X5_OMR);\
+    lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD) | GEP_MODE;\
+    gep_wr(lp->cache.gep, dev);\
+  }\
+}
+
+/* FIX ME so I don't jam 10Mb networks */
+#define SET_100Mb_PDET {\
+  if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\
+    mii_wr(MII_CR_100|MII_CR_ASSE, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
+    omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    outl(omr, DE4X5_OMR);\
+  } else if (lp->useSROM && !lp->useMII) {\
+    omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    outl(omr, DE4X5_OMR);\
+  } else {\
+    omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS, DE4X5_OMR);\
+    lp->cache.gep = (GEP_FDXD | GEP_MODE);\
+    gep_wr(lp->cache.gep, dev);\
+  }\
+}
+
+/*
+** Include the IOCTL stuff
+*/
+#include <linux/sockios.h>
+
+#define DE4X5IOCTL      SIOCDEVPRIVATE
+
+struct de4x5_ioctl {
+        unsigned short cmd;                /* Command to run */
+        unsigned short len;                /* Length of the data buffer */
+        unsigned char  __user *data;       /* Pointer to the data buffer */
+};
+
+/* 
+** Recognised commands for the driver 
+*/
+#define DE4X5_GET_HWADDR        0x01 /* Get the hardware address */
+#define DE4X5_SET_HWADDR        0x02 /* Set the hardware address */
+#define DE4X5_SET_PROM          0x03 /* Set Promiscuous Mode */
+#define DE4X5_CLR_PROM          0x04 /* Clear Promiscuous Mode */
+#define DE4X5_SAY_BOO           0x05 /* Say "Boo!" to the kernel log file */
+#define DE4X5_GET_MCA           0x06 /* Get a multicast address */
+#define DE4X5_SET_MCA           0x07 /* Set a multicast address */
+#define DE4X5_CLR_MCA           0x08 /* Clear a multicast address */
+#define DE4X5_MCA_EN            0x09 /* Enable a multicast address group */
+#define DE4X5_GET_STATS         0x0a /* Get the driver statistics */
+#define DE4X5_CLR_STATS         0x0b /* Zero out the driver statistics */
+#define DE4X5_GET_OMR           0x0c /* Get the OMR Register contents */
+#define DE4X5_SET_OMR           0x0d /* Set the OMR Register contents */
+#define DE4X5_GET_REG           0x0e /* Get the DE4X5 Registers */
+
+#define MOTO_SROM_BUG    ((lp->active == 8) && (((le32_to_cpu(get_unaligned(((s32 *)dev->dev_addr))))&0x00ffffff)==0x3e0008))