[TG3]: Add PHY workaround for 5784

The 5784 B step and newer chips require the PHY DSPs to be fine-tuned
based on one-time programmable values stored in the chip.  This is
essential to achieve optimal PHY operations especially when using
long cables.  We also need to properly handle the 10Mbit RX bit in the
CPMU_CTRL register during PHY reset.

Update version to 3.89.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 76 insertions, 3 deletions

diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 3938eb35ce8c..c1075a73d66c 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -138,6 +138,8 @@
 #define   CHIPREV_5704_BX                0x21
 #define   CHIPREV_5750_AX                0x40
 #define   CHIPREV_5750_BX                0x41
+#define   CHIPREV_5784_AX                0x57840
+#define   CHIPREV_5761_AX                0x57610
 #define  GET_METAL_REV(CHIP_REV_ID)     ((CHIP_REV_ID) & 0xff)
 #define   METAL_REV_A0                   0x00
 #define   METAL_REV_A1                   0x01
@@ -866,6 +868,7 @@
 #define  CPMU_CTRL_LINK_IDLE_MODE        0x00000200
 #define  CPMU_CTRL_LINK_AWARE_MODE       0x00000400
 #define  CPMU_CTRL_LINK_SPEED_MODE       0x00004000
+#define  CPMU_CTRL_GPHY_10MB_RXONLY      0x00010000
 #define TG3_CPMU_LSPD_10MB_CLK          0x00003604
 #define  CPMU_LSPD_10MB_MACCLK_MASK      0x001f0000
 #define  CPMU_LSPD_10MB_MACCLK_6_25      0x00130000
@@ -1559,7 +1562,24 @@
 /* 0x702c unused */
 
 #define NVRAM_ADDR_LOCKOUT              0x00007030
-/* 0x7034 --> 0x7c00 unused */
+/* 0x7034 --> 0x7500 unused */
+
+#define OTP_MODE                        0x00007500
+#define OTP_MODE_OTP_THRU_GRC            0x00000001
+#define OTP_CTRL                        0x00007504
+#define OTP_CTRL_OTP_PROG_ENABLE         0x00200000
+#define OTP_CTRL_OTP_CMD_READ            0x00000000
+#define OTP_CTRL_OTP_CMD_INIT            0x00000008
+#define OTP_CTRL_OTP_CMD_START           0x00000001
+#define OTP_STATUS                      0x00007508
+#define OTP_STATUS_CMD_DONE              0x00000001
+#define OTP_ADDRESS                     0x0000750c
+#define OTP_ADDRESS_MAGIC1               0x000000a0
+#define OTP_ADDRESS_MAGIC2               0x00000080
+/* 0x7510 unused */
+
+#define OTP_READ_DATA                   0x00007514
+/* 0x7518 --> 0x7c04 unused */
 
 #define PCIE_TRANSACTION_CFG            0x00007c04
 #define PCIE_TRANS_CFG_1SHOT_MSI         0x20000000
@@ -1568,6 +1588,28 @@
 #define PCIE_PWR_MGMT_THRESH            0x00007d28
 #define PCIE_PWR_MGMT_L1_THRESH_MSK      0x0000ff00
 
+
+/* OTP bit definitions */
+#define TG3_OTP_AGCTGT_MASK             0x000000e0
+#define TG3_OTP_AGCTGT_SHIFT            1
+#define TG3_OTP_HPFFLTR_MASK            0x00000300
+#define TG3_OTP_HPFFLTR_SHIFT           1
+#define TG3_OTP_HPFOVER_MASK            0x00000400
+#define TG3_OTP_HPFOVER_SHIFT           1
+#define TG3_OTP_LPFDIS_MASK             0x00000800
+#define TG3_OTP_LPFDIS_SHIFT            11
+#define TG3_OTP_VDAC_MASK               0xff000000
+#define TG3_OTP_VDAC_SHIFT              24
+#define TG3_OTP_10BTAMP_MASK            0x0000f000
+#define TG3_OTP_10BTAMP_SHIFT           8
+#define TG3_OTP_ROFF_MASK               0x00e00000
+#define TG3_OTP_ROFF_SHIFT              11
+#define TG3_OTP_RCOFF_MASK              0x001c0000
+#define TG3_OTP_RCOFF_SHIFT             16
+
+#define TG3_OTP_DEFAULT                 0x286c1640
+
+
 #define TG3_EEPROM_MAGIC                0x669955aa
 #define TG3_EEPROM_MAGIC_FW             0xa5000000
 #define TG3_EEPROM_MAGIC_FW_MSK         0xff000000
@@ -1705,15 +1747,31 @@
 
 #define MII_TG3_DSP_RW_PORT             0x15 /* DSP coefficient read/write port */
 
-#define MII_TG3_DSP_ADDRESS             0x17 /* DSP address register */
 #define MII_TG3_EPHY_PTEST              0x17 /* 5906 PHY register */
+#define MII_TG3_DSP_ADDRESS             0x17 /* DSP address register */
+
+#define MII_TG3_DSP_TAP1                0x0001
+#define  MII_TG3_DSP_TAP1_AGCTGT_DFLT   0x0007
+#define MII_TG3_DSP_AADJ1CH0            0x001f
+#define MII_TG3_DSP_AADJ1CH3            0x601f
+#define  MII_TG3_DSP_AADJ1CH3_ADCCKADJ  0x0002
+#define MII_TG3_DSP_EXP8                0x0708
+#define  MII_TG3_DSP_EXP8_REJ2MHz       0x0001
+#define  MII_TG3_DSP_EXP8_AEDW          0x0200
+#define MII_TG3_DSP_EXP75               0x0f75
+#define MII_TG3_DSP_EXP96               0x0f96
+#define MII_TG3_DSP_EXP97               0x0f97
 
 #define MII_TG3_AUX_CTRL                0x18 /* auxilliary control register */
 
 #define MII_TG3_AUXCTL_MISC_WREN        0x8000
 #define MII_TG3_AUXCTL_MISC_FORCE_AMDIX 0x0200
 #define MII_TG3_AUXCTL_MISC_RDSEL_MISC  0x7000
-#define MII_TG3_AUXCTL_SHDWSEL_MISC             0x0007
+#define MII_TG3_AUXCTL_SHDWSEL_MISC     0x0007
+
+#define MII_TG3_AUXCTL_ACTL_SMDSP_ENA   0x0800
+#define MII_TG3_AUXCTL_ACTL_TX_6DB      0x0400
+#define MII_TG3_AUXCTL_SHDWSEL_AUXCTL   0x0000
 
 #define MII_TG3_AUX_STAT                0x19 /* auxilliary status register */
 #define MII_TG3_AUX_STAT_LPASS          0x0004
@@ -1743,6 +1801,20 @@
 #define MII_TG3_INT_DUPLEXCHG           0x0008
 #define MII_TG3_INT_ANEG_PAGE_RX        0x0400
 
+#define MII_TG3_MISC_SHDW               0x1c
+#define MII_TG3_MISC_SHDW_WREN          0x8000
+#define MII_TG3_MISC_SHDW_SCR5_SEL      0x1400
+#define MII_TG3_MISC_SHDW_APD_SEL       0x2800
+
+#define MII_TG3_MISC_SHDW_SCR5_C125OE   0x0001
+#define MII_TG3_MISC_SHDW_SCR5_DLLAPD   0x0002
+#define MII_TG3_MISC_SHDW_SCR5_SDTL     0x0004
+#define MII_TG3_MISC_SHDW_SCR5_DLPTLM   0x0008
+#define MII_TG3_MISC_SHDW_SCR5_LPED     0x0010
+
+#define MII_TG3_MISC_SHDW_APD_WKTM_84MS 0x0001
+#define MII_TG3_MISC_SHDW_APD_ENABLE    0x0020
+
 #define MII_TG3_EPHY_TEST               0x1f /* 5906 PHY register */
 #define MII_TG3_EPHY_SHADOW_EN          0x80
 
@@ -2473,6 +2545,7 @@ struct tg3 {
 #define PHY_REV_BCM5411_X0              0x1 /* Found on Netgear GA302T */
 
         u32                             led_ctrl;
+        u32                             phy_otp;
         u16                             pci_cmd;
 
         char                            board_part_number[24];