tg3: Convert code to use PHY_IS_FET

This patch converts the code to use the PHY_IS_FET flag rather than the
ASIC revision to decide whether or not to use FET paths.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 46 insertions, 27 deletions

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 800f98069c1c..2808152e869c 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -784,7 +784,7 @@ static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
         unsigned int loops;
         int ret;
 
-        if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 &&
+        if ((tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) &&
             (reg == MII_TG3_CTRL || reg == MII_TG3_AUX_CTRL))
                 return 0;
 
@@ -1069,6 +1069,7 @@ static int tg3_mdio_init(struct tg3 *tp)
         case TG3_PHY_ID_RTL8201E:
         case TG3_PHY_ID_BCMAC131:
                 phydev->interface = PHY_INTERFACE_MODE_MII;
+                tp->tg3_flags3 |= TG3_FLG3_PHY_IS_FET;
                 break;
         }
 
@@ -1474,13 +1475,37 @@ static void tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
         tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
 }
 
+static void tg3_phy_fet_toggle_apd(struct tg3 *tp, bool enable)
+{
+        u32 phytest;
+
+        if (!tg3_readphy(tp, MII_TG3_FET_TEST, &phytest)) {
+                u32 phy;
+
+                tg3_writephy(tp, MII_TG3_FET_TEST,
+                             phytest | MII_TG3_FET_SHADOW_EN);
+                if (!tg3_readphy(tp, MII_TG3_FET_SHDW_AUXSTAT2, &phy)) {
+                        if (enable)
+                                phy |= MII_TG3_FET_SHDW_AUXSTAT2_APD;
+                        else
+                                phy &= ~MII_TG3_FET_SHDW_AUXSTAT2_APD;
+                        tg3_writephy(tp, MII_TG3_FET_SHDW_AUXSTAT2, phy);
+                }
+                tg3_writephy(tp, MII_TG3_FET_TEST, phytest);
+        }
+}
+
 static void tg3_phy_toggle_apd(struct tg3 *tp, bool enable)
 {
         u32 reg;
 
-        if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
-            GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+        if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+                return;
+
+        if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
+                tg3_phy_fet_toggle_apd(tp, enable);
                 return;
+        }
 
         reg = MII_TG3_MISC_SHDW_WREN |
               MII_TG3_MISC_SHDW_SCR5_SEL |
@@ -1511,7 +1536,7 @@ static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
             (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
                 return;
 
-        if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+        if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
                 u32 ephy;
 
                 if (!tg3_readphy(tp, MII_TG3_FET_TEST, &ephy)) {
@@ -2662,7 +2687,7 @@ static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8
                 break;
 
         default:
-                if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+                if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
                         *speed = (val & MII_TG3_AUX_STAT_100) ? SPEED_100 :
                                  SPEED_10;
                         *duplex = (val & MII_TG3_AUX_STAT_FULL) ? DUPLEX_FULL :
@@ -2997,7 +3022,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 
         if (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT)
                 tg3_writephy(tp, MII_TG3_IMASK, ~MII_TG3_INT_LINKCHG);
-        else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)
+        else if (!(tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET))
                 tg3_writephy(tp, MII_TG3_IMASK, ~0);
 
         if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
@@ -3107,7 +3132,9 @@ relink:
                         tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
                 else
                         tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
-        } else
+        } else if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET)
+                tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
+        else
                 tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
 
         tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
@@ -7349,7 +7376,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
                         return err;
 
                 if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
-                    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) {
+                    !(tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET)) {
                         u32 tmp;
 
                         /* Clear CRC stats. */
@@ -9746,20 +9773,8 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
         } else if (loopback_mode == TG3_PHY_LOOPBACK) {
                 u32 val;
 
-                if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
-                        u32 phytest;
-
-                        if (!tg3_readphy(tp, MII_TG3_FET_TEST, &phytest)) {
-                                u32 phy, reg = MII_TG3_FET_SHDW_AUXSTAT2;
-
-                                tg3_writephy(tp, MII_TG3_FET_TEST,
-                                             phytest | MII_TG3_FET_SHADOW_EN);
-                                if (!tg3_readphy(tp, reg, &phy)) {
-                                        phy &= ~MII_TG3_FET_SHDW_AUXSTAT2_APD;
-                                        tg3_writephy(tp, reg, phy);
-                                }
-                                tg3_writephy(tp, MII_TG3_FET_TEST, phytest);
-                        }
+                if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
+                        tg3_phy_fet_toggle_apd(tp, false);
                         val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
                 } else
                         val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED1000;
@@ -9770,8 +9785,9 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
                 udelay(40);
 
                 mac_mode = tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK;
-                if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
-                        tg3_writephy(tp, MII_TG3_FET_PTEST, 0x1800);
+                if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
+                        if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+                                tg3_writephy(tp, MII_TG3_FET_PTEST, 0x1800);
                         mac_mode |= MAC_MODE_PORT_MODE_MII;
                 } else
                         mac_mode |= MAC_MODE_PORT_MODE_GMII;
@@ -12268,12 +12284,15 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
                 tp->tg3_flags |= TG3_FLAG_WOL_SPEED_100MB;
         }
 
+        if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+                tp->tg3_flags3 |= TG3_FLG3_PHY_IS_FET;
+
         /* A few boards don't want Ethernet@WireSpeed phy feature */
         if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
             ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
              (tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) &&
              (tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)) ||
-            (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) ||
+            (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) ||
             (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
                 tp->tg3_flags2 |= TG3_FLG2_NO_ETH_WIRE_SPEED;
 
@@ -12284,7 +12303,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
                 tp->tg3_flags2 |= TG3_FLG2_PHY_5704_A0_BUG;
 
         if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
-            GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906 &&
+            !(tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) &&
             GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
             GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57780) {
                 if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
@@ -12409,7 +12428,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
               tp->pdev->device == PCI_DEVICE_ID_TIGON3_5753F ||
               tp->pdev->device == PCI_DEVICE_ID_TIGON3_5787F)) ||
             tp->pdev->device == TG3PCI_DEVICE_TIGON3_57790 ||
-            GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+            (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET))
                 tp->tg3_flags |= TG3_FLAG_10_100_ONLY;
 
         err = tg3_phy_probe(tp);