smsc911x: add external phy detection overrides

On LAN9115/LAN9117/LAN9215/LAN9217, external phys are supported.  These
are usually indicated by a hardware strap which sets an "external PHY
detected" bit in the HW_CFG register.

In some cases it is desirable to override this hardware strap and force
use of either the internal phy or an external PHY.  This patch adds
SMSC911X_FORCE_INTERNAL_PHY and SMSC911X_FORCE_EXTERNAL_PHY flags so a
platform can indicate this preference via its platform_data.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 38 insertions, 37 deletions

diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 6aa2b165de6a..27d2d7c45519 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -368,48 +368,53 @@ out:
         return reg;
 }
 
-/* Autodetects and initialises external phy for SMSC9115 and SMSC9117 flavors.
- * If something goes wrong, returns -ENODEV to revert back to internal phy.
- * Performed at initialisation only, so interrupts are enabled */
-static int smsc911x_phy_initialise_external(struct smsc911x_data *pdata)
+/* Switch to external phy. Assumes tx and rx are stopped. */
+static void smsc911x_phy_enable_external(struct smsc911x_data *pdata)
 {
         unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
 
-        /* External phy is requested, supported, and detected */
-        if (hwcfg & HW_CFG_EXT_PHY_DET_) {
+        /* Disable phy clocks to the MAC */
+        hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
+        hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
+        smsc911x_reg_write(pdata, HW_CFG, hwcfg);
+        udelay(10);     /* Enough time for clocks to stop */
 
-                /* Switch to external phy. Assuming tx and rx are stopped
-                 * because smsc911x_phy_initialise is called before
-                 * smsc911x_rx_initialise and tx_initialise. */
+        /* Switch to external phy */
+        hwcfg |= HW_CFG_EXT_PHY_EN_;
+        smsc911x_reg_write(pdata, HW_CFG, hwcfg);
 
-                /* Disable phy clocks to the MAC */
-                hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
-                hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
-                smsc911x_reg_write(pdata, HW_CFG, hwcfg);
-                udelay(10);     /* Enough time for clocks to stop */
+        /* Enable phy clocks to the MAC */
+        hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
+        hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_;
+        smsc911x_reg_write(pdata, HW_CFG, hwcfg);
+        udelay(10);     /* Enough time for clocks to restart */
 
-                /* Switch to external phy */
-                hwcfg |= HW_CFG_EXT_PHY_EN_;
-                smsc911x_reg_write(pdata, HW_CFG, hwcfg);
-
-                /* Enable phy clocks to the MAC */
-                hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
-                hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_;
-                smsc911x_reg_write(pdata, HW_CFG, hwcfg);
-                udelay(10);     /* Enough time for clocks to restart */
+        hwcfg |= HW_CFG_SMI_SEL_;
+        smsc911x_reg_write(pdata, HW_CFG, hwcfg);
+}
 
-                hwcfg |= HW_CFG_SMI_SEL_;
-                smsc911x_reg_write(pdata, HW_CFG, hwcfg);
+/* Autodetects and enables external phy if present on supported chips.
+ * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY
+ * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */
+static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata)
+{
+        unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
 
-                SMSC_TRACE(HW, "Successfully switched to external PHY");
+        if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) {
+                SMSC_TRACE(HW, "Forcing internal PHY");
+                pdata->using_extphy = 0;
+        } else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) {
+                SMSC_TRACE(HW, "Forcing external PHY");
+                smsc911x_phy_enable_external(pdata);
+                pdata->using_extphy = 1;
+        } else if (hwcfg & HW_CFG_EXT_PHY_DET_) {
+                SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET set, using external PHY");
+                smsc911x_phy_enable_external(pdata);
                 pdata->using_extphy = 1;
         } else {
-                SMSC_WARNING(HW, "No external PHY detected, "
-                        "Using internal PHY instead.");
-                /* Use internal phy */
-                return -ENODEV;
+                SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET clear, using internal PHY");
+                pdata->using_extphy = 0;
         }
-        return 0;
 }
 
 /* Fetches a tx status out of the status fifo */
@@ -825,22 +830,18 @@ static int __devinit smsc911x_mii_init(struct platform_device *pdev,
 
         pdata->mii_bus->parent = &pdev->dev;
 
-        pdata->using_extphy = 0;
-
         switch (pdata->idrev & 0xFFFF0000) {
         case 0x01170000:
         case 0x01150000:
         case 0x117A0000:
         case 0x115A0000:
                 /* External PHY supported, try to autodetect */
-                if (smsc911x_phy_initialise_external(pdata) < 0) {
-                        SMSC_TRACE(HW, "No external PHY detected, "
-                                "using internal PHY");
-                }
+                smsc911x_phy_initialise_external(pdata);
                 break;
         default:
                 SMSC_TRACE(HW, "External PHY is not supported, "
                         "using internal PHY");
+                pdata->using_extphy = 0;
                 break;
         }