smc91x: introduce platform data flags V2

This patch introduces struct smc91x_platdata and modifies the driver so
bus width is checked during run time using SMC_nBIT() instead of
SMC_CAN_USE_nBIT.

V2 keeps static configuration lean using SMC_DYNAMIC_BUS_CONFIG.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 29 insertions, 5 deletions

diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index d0ef80ae018a..97bdb2a43bc8 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1997,6 +1997,8 @@ err_out:
 
 static int smc_enable_device(struct platform_device *pdev)
 {
+        struct net_device *ndev = platform_get_drvdata(pdev);
+        struct smc_local *lp = netdev_priv(ndev);
         unsigned long flags;
         unsigned char ecor, ecsr;
         void __iomem *addr;
@@ -2039,7 +2041,7 @@ static int smc_enable_device(struct platform_device *pdev)
          * Set the appropriate byte/word mode.
          */
         ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8;
-        if (!SMC_CAN_USE_16BIT)
+        if (!SMC_16BIT(lp))
                 ecsr |= ECSR_IOIS8;
         writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT));
         local_irq_restore(flags);
@@ -2124,10 +2126,11 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device *
  */
 static int smc_drv_probe(struct platform_device *pdev)
 {
+        struct smc91x_platdata *pd = pdev->dev.platform_data;
+        struct smc_local *lp;
         struct net_device *ndev;
         struct resource *res, *ires;
         unsigned int __iomem *addr;
-        unsigned long irq_flags = SMC_IRQ_FLAGS;
         int ret;
 
         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
@@ -2152,6 +2155,27 @@ static int smc_drv_probe(struct platform_device *pdev)
         }
         SET_NETDEV_DEV(ndev, &pdev->dev);
 
+        /* get configuration from platform data, only allow use of
+         * bus width if both SMC_CAN_USE_xxx and SMC91X_USE_xxx are set.
+         */
+
+        lp = netdev_priv(ndev);
+        lp->cfg.irq_flags = SMC_IRQ_FLAGS;
+
+#ifdef SMC_DYNAMIC_BUS_CONFIG
+        if (pd)
+                memcpy(&lp->cfg, pd, sizeof(lp->cfg));
+        else {
+                lp->cfg.flags = SMC91X_USE_8BIT;
+                lp->cfg.flags |= SMC91X_USE_16BIT;
+                lp->cfg.flags |= SMC91X_USE_32BIT;
+        }
+
+        lp->cfg.flags &= ~(SMC_CAN_USE_8BIT ? 0 : SMC91X_USE_8BIT);
+        lp->cfg.flags &= ~(SMC_CAN_USE_16BIT ? 0 : SMC91X_USE_16BIT);
+        lp->cfg.flags &= ~(SMC_CAN_USE_32BIT ? 0 : SMC91X_USE_32BIT);
+#endif
+
         ndev->dma = (unsigned char)-1;
 
         ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -2162,7 +2186,7 @@ static int smc_drv_probe(struct platform_device *pdev)
 
         ndev->irq = ires->start;
         if (SMC_IRQ_FLAGS == -1)
-                irq_flags = ires->flags & IRQF_TRIGGER_MASK;
+                lp->cfg.irq_flags = ires->flags & IRQF_TRIGGER_MASK;
 
         ret = smc_request_attrib(pdev);
         if (ret)
@@ -2170,6 +2194,7 @@ static int smc_drv_probe(struct platform_device *pdev)
 #if defined(CONFIG_SA1100_ASSABET)
         NCR_0 |= NCR_ENET_OSC_EN;
 #endif
+        platform_set_drvdata(pdev, ndev);
         ret = smc_enable_device(pdev);
         if (ret)
                 goto out_release_attrib;
@@ -2188,8 +2213,7 @@ static int smc_drv_probe(struct platform_device *pdev)
         }
 #endif
 
-        platform_set_drvdata(pdev, ndev);
-        ret = smc_probe(ndev, addr, irq_flags);
+        ret = smc_probe(ndev, addr, lp->cfg.irq_flags);
         if (ret != 0)
                 goto out_iounmap;