drivers/net: Trim trailing whitespace

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 36 insertions, 36 deletions

diff --git a/drivers/net/smc9194.h b/drivers/net/smc9194.h
index 393ab909bd86..cf69d0a5a1cb 100644
--- a/drivers/net/smc9194.h
+++ b/drivers/net/smc9194.h
@@ -1,18 +1,18 @@
 /*------------------------------------------------------------------------
  . smc9194.h
- . Copyright (C) 1996 by Erik Stahlman 
+ . Copyright (C) 1996 by Erik Stahlman
  .
  . This software may be used and distributed according to the terms
  . of the GNU General Public License, incorporated herein by reference.
  .
- . This file contains register information and access macros for 
- . the SMC91xxx chipset.   
- . 
- . Information contained in this file was obtained from the SMC91C94 
- . manual from SMC.  To get a copy, if you really want one, you can find 
+ . This file contains register information and access macros for
+ . the SMC91xxx chipset.
+ .
+ . Information contained in this file was obtained from the SMC91C94
+ . manual from SMC.  To get a copy, if you really want one, you can find
  . information under www.smc.com in the components division.
  . ( this thanks to advice from Donald Becker ).
- . 
+ .
  . Authors
  .      Erik Stahlman                           ( erik@vt.edu )
  .
@@ -38,22 +38,22 @@ typedef unsigned long int 		dword;
 
 
 /*---------------------------------------------------------------
- .  
+ .
  . A description of the SMC registers is probably in order here,
- . although for details, the SMC datasheet is invaluable.  
- . 
+ . although for details, the SMC datasheet is invaluable.
+ .
  . Basically, the chip has 4 banks of registers ( 0 to 3 ), which
  . are accessed by writing a number into the BANK_SELECT register
  . ( I also use a SMC_SELECT_BANK macro for this ).
- . 
+ .
  . The banks are configured so that for most purposes, bank 2 is all
- . that is needed for simple run time tasks.  
+ . that is needed for simple run time tasks.
  -----------------------------------------------------------------------*/
 
 /*
- . Bank Select Register: 
+ . Bank Select Register:
  .
- .              yyyy yyyy 0000 00xx  
+ .              yyyy yyyy 0000 00xx
  .              xx              = bank number
  .              yyyy yyyy       = 0x33, for identification purposes.
 */
@@ -62,23 +62,23 @@ typedef unsigned long int 		dword;
 /* BANK 0  */
 
 #define TCR             0       /* transmit control register */
-#define TCR_ENABLE      0x0001  /* if this is 1, we can transmit */ 
+#define TCR_ENABLE      0x0001  /* if this is 1, we can transmit */
 #define TCR_FDUPLX      0x0800  /* receive packets sent out */
 #define TCR_STP_SQET    0x1000  /* stop transmitting if Signal quality error */
 #define TCR_MON_CNS     0x0400  /* monitors the carrier status */
 #define TCR_PAD_ENABLE  0x0080  /* pads short packets to 64 bytes */
 
 #define TCR_CLEAR       0       /* do NOTHING */
-/* the normal settings for the TCR register : */ 
+/* the normal settings for the TCR register : */
 /* QUESTION: do I want to enable padding of short packets ? */
-#define TCR_NORMAL      TCR_ENABLE 
+#define TCR_NORMAL      TCR_ENABLE
 
 
 #define EPH_STATUS      2
 #define ES_LINK_OK      0x4000  /* is the link integrity ok ? */
 
 #define RCR             4
-#define RCR_SOFTRESET   0x8000  /* resets the chip */   
+#define RCR_SOFTRESET   0x8000  /* resets the chip */
 #define RCR_STRIP_CRC   0x200   /* strips CRC */
 #define RCR_ENABLE      0x100   /* IFF this is set, we can receive packets */
 #define RCR_ALMUL       0x4     /* receive all multicast packets */
@@ -114,12 +114,12 @@ typedef unsigned long int 		dword;
 #define MC_BUSY         1       /* only readable bit in the register */
 #define MC_NOP          0
 #define MC_ALLOC        0x20    /* or with number of 256 byte packets */
-#define MC_RESET        0x40    
+#define MC_RESET        0x40
 #define MC_REMOVE       0x60    /* remove the current rx packet */
 #define MC_RELEASE      0x80    /* remove and release the current rx packet */
 #define MC_FREEPKT      0xA0    /* Release packet in PNR register */
 #define MC_ENQUEUE      0xC0    /* Enqueue the packet for transmit */
-        
+
 #define PNR_ARR         2
 #define FIFO_PORTS      4
 
@@ -139,11 +139,11 @@ typedef unsigned long int 		dword;
 #define INT_MASK        13
 #define IM_RCV_INT      0x1
 #define IM_TX_INT       0x2
-#define IM_TX_EMPTY_INT 0x4     
+#define IM_TX_EMPTY_INT 0x4
 #define IM_ALLOC_INT    0x8
 #define IM_RX_OVRN_INT  0x10
 #define IM_EPH_INT      0x20
-#define IM_ERCV_INT     0x40 /* not on SMC9192 */               
+#define IM_ERCV_INT     0x40 /* not on SMC9192 */
 
 /* BANK 3 */
 #define MULTICAST1      0
@@ -162,19 +162,19 @@ typedef unsigned long int 		dword;
 #define CHIP_9195       5
 #define CHIP_91100      7
 
-static const char * chip_ids[ 15 ] =  { 
-        NULL, NULL, NULL, 
+static const char * chip_ids[ 15 ] =  {
+        NULL, NULL, NULL,
         /* 3 */ "SMC91C90/91C92",
         /* 4 */ "SMC91C94",
         /* 5 */ "SMC91C95",
         NULL,
-        /* 7 */ "SMC91C100", 
-        /* 8 */ "SMC91C100FD", 
-        NULL, NULL, NULL, 
-        NULL, NULL, NULL};  
+        /* 7 */ "SMC91C100",
+        /* 8 */ "SMC91C100FD",
+        NULL, NULL, NULL,
+        NULL, NULL, NULL};
 
-/* 
- . Transmit status bits 
+/*
+ . Transmit status bits
 */
 #define TS_SUCCESS 0x0001
 #define TS_LOSTCAR 0x0400
@@ -190,18 +190,18 @@ static const char * chip_ids[ 15 ] =  {
 #define RS_TOOLONG      0x0800
 #define RS_TOOSHORT     0x0400
 #define RS_MULTICAST    0x0001
-#define RS_ERRORS       (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT) 
+#define RS_ERRORS       (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
 
 static const char * interfaces[ 2 ] = { "TP", "AUI" };
 
 /*-------------------------------------------------------------------------
  .  I define some macros to make it easier to do somewhat common
- . or slightly complicated, repeated tasks. 
+ . or slightly complicated, repeated tasks.
  --------------------------------------------------------------------------*/
 
 /* select a register bank, 0 to 3  */
 
-#define SMC_SELECT_BANK(x)  { outw( x, ioaddr + BANK_SELECT ); } 
+#define SMC_SELECT_BANK(x)  { outw( x, ioaddr + BANK_SELECT ); }
 
 /* define a small delay for the reset */
 #define SMC_DELAY() { inw( ioaddr + RCR );\
@@ -229,13 +229,13 @@ static const char * interfaces[ 2 ] = { "TP", "AUI" };
 
 /*----------------------------------------------------------------------
  . Define the interrupts that I want to receive from the card
- . 
- . I want: 
+ .
+ . I want:
  .  IM_EPH_INT, for nasty errors
  .  IM_RCV_INT, for happy received packets
  .  IM_RX_OVRN_INT, because I have to kick the receiver
  --------------------------------------------------------------------------*/
-#define SMC_INTERRUPT_MASK   (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT) 
+#define SMC_INTERRUPT_MASK   (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT)
 
 #endif  /* _SMC_9194_H_ */