Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 241 insertions, 0 deletions

diff --git a/drivers/net/smc9194.h b/drivers/net/smc9194.h
new file mode 100644
index 000000000000..393ab909bd86
--- /dev/null
+++ b/drivers/net/smc9194.h
@@ -0,0 +1,241 @@
+/*------------------------------------------------------------------------
+ . smc9194.h
+ . Copyright (C) 1996 by Erik Stahlman 
+ .
+ . This software may be used and distributed according to the terms
+ . of the GNU General Public License, incorporated herein by reference.
+ .
+ . This file contains register information and access macros for 
+ . the SMC91xxx chipset.   
+ . 
+ . Information contained in this file was obtained from the SMC91C94 
+ . manual from SMC.  To get a copy, if you really want one, you can find 
+ . information under www.smc.com in the components division.
+ . ( this thanks to advice from Donald Becker ).
+ . 
+ . Authors
+ .      Erik Stahlman                           ( erik@vt.edu )
+ .
+ . History
+ . 01/06/96              Erik Stahlman   moved definitions here from main .c file
+ . 01/19/96              Erik Stahlman    polished this up some, and added better
+ .                                                                                error handling
+ .
+ ---------------------------------------------------------------------------*/
+#ifndef _SMC9194_H_
+#define _SMC9194_H_
+
+/* I want some simple types */
+
+typedef unsigned char                   byte;
+typedef unsigned short                  word;
+typedef unsigned long int               dword;
+
+
+/* Because of bank switching, the SMC91xxx uses only 16 I/O ports */
+
+#define SMC_IO_EXTENT   16
+
+
+/*---------------------------------------------------------------
+ .  
+ . A description of the SMC registers is probably in order here,
+ . although for details, the SMC datasheet is invaluable.  
+ . 
+ . Basically, the chip has 4 banks of registers ( 0 to 3 ), which
+ . are accessed by writing a number into the BANK_SELECT register
+ . ( I also use a SMC_SELECT_BANK macro for this ).
+ . 
+ . The banks are configured so that for most purposes, bank 2 is all
+ . that is needed for simple run time tasks.  
+ -----------------------------------------------------------------------*/
+
+/*
+ . Bank Select Register: 
+ .
+ .              yyyy yyyy 0000 00xx  
+ .              xx              = bank number
+ .              yyyy yyyy       = 0x33, for identification purposes.
+*/
+#define BANK_SELECT             14
+
+/* BANK 0  */
+
+#define TCR             0       /* transmit control register */
+#define TCR_ENABLE      0x0001  /* if this is 1, we can transmit */ 
+#define TCR_FDUPLX      0x0800  /* receive packets sent out */
+#define TCR_STP_SQET    0x1000  /* stop transmitting if Signal quality error */
+#define TCR_MON_CNS     0x0400  /* monitors the carrier status */
+#define TCR_PAD_ENABLE  0x0080  /* pads short packets to 64 bytes */
+
+#define TCR_CLEAR       0       /* do NOTHING */
+/* the normal settings for the TCR register : */ 
+/* QUESTION: do I want to enable padding of short packets ? */
+#define TCR_NORMAL      TCR_ENABLE 
+
+
+#define EPH_STATUS      2
+#define ES_LINK_OK      0x4000  /* is the link integrity ok ? */
+
+#define RCR             4
+#define RCR_SOFTRESET   0x8000  /* resets the chip */   
+#define RCR_STRIP_CRC   0x200   /* strips CRC */
+#define RCR_ENABLE      0x100   /* IFF this is set, we can receive packets */
+#define RCR_ALMUL       0x4     /* receive all multicast packets */
+#define RCR_PROMISC     0x2     /* enable promiscuous mode */
+
+/* the normal settings for the RCR register : */
+#define RCR_NORMAL      (RCR_STRIP_CRC | RCR_ENABLE)
+#define RCR_CLEAR       0x0             /* set it to a base state */
+
+#define COUNTER         6
+#define MIR             8
+#define MCR             10
+/* 12 is reserved */
+
+/* BANK 1 */
+#define CONFIG                  0
+#define CFG_AUI_SELECT          0x100
+#define BASE                    2
+#define ADDR0                   4
+#define ADDR1                   6
+#define ADDR2                   8
+#define GENERAL                 10
+#define CONTROL                 12
+#define CTL_POWERDOWN           0x2000
+#define CTL_LE_ENABLE           0x80
+#define CTL_CR_ENABLE           0x40
+#define CTL_TE_ENABLE           0x0020
+#define CTL_AUTO_RELEASE        0x0800
+#define CTL_EPROM_ACCESS        0x0003 /* high if Eprom is being read */
+
+/* BANK 2 */
+#define MMU_CMD         0
+#define MC_BUSY         1       /* only readable bit in the register */
+#define MC_NOP          0
+#define MC_ALLOC        0x20    /* or with number of 256 byte packets */
+#define MC_RESET        0x40    
+#define MC_REMOVE       0x60    /* remove the current rx packet */
+#define MC_RELEASE      0x80    /* remove and release the current rx packet */
+#define MC_FREEPKT      0xA0    /* Release packet in PNR register */
+#define MC_ENQUEUE      0xC0    /* Enqueue the packet for transmit */
+        
+#define PNR_ARR         2
+#define FIFO_PORTS      4
+
+#define FP_RXEMPTY  0x8000
+#define FP_TXEMPTY  0x80
+
+#define POINTER         6
+#define PTR_READ        0x2000
+#define PTR_RCV         0x8000
+#define PTR_AUTOINC     0x4000
+#define PTR_AUTO_INC    0x0040
+
+#define DATA_1          8
+#define DATA_2          10
+#define INTERRUPT       12
+
+#define INT_MASK        13
+#define IM_RCV_INT      0x1
+#define IM_TX_INT       0x2
+#define IM_TX_EMPTY_INT 0x4     
+#define IM_ALLOC_INT    0x8
+#define IM_RX_OVRN_INT  0x10
+#define IM_EPH_INT      0x20
+#define IM_ERCV_INT     0x40 /* not on SMC9192 */               
+
+/* BANK 3 */
+#define MULTICAST1      0
+#define MULTICAST2      2
+#define MULTICAST3      4
+#define MULTICAST4      6
+#define MGMT            8
+#define REVISION        10 /* ( hi: chip id   low: rev # ) */
+
+
+/* this is NOT on SMC9192 */
+#define ERCV            12
+
+#define CHIP_9190       3
+#define CHIP_9194       4
+#define CHIP_9195       5
+#define CHIP_91100      7
+
+static const char * chip_ids[ 15 ] =  { 
+        NULL, NULL, NULL, 
+        /* 3 */ "SMC91C90/91C92",
+        /* 4 */ "SMC91C94",
+        /* 5 */ "SMC91C95",
+        NULL,
+        /* 7 */ "SMC91C100", 
+        /* 8 */ "SMC91C100FD", 
+        NULL, NULL, NULL, 
+        NULL, NULL, NULL};  
+
+/* 
+ . Transmit status bits 
+*/
+#define TS_SUCCESS 0x0001
+#define TS_LOSTCAR 0x0400
+#define TS_LATCOL  0x0200
+#define TS_16COL   0x0010
+
+/*
+ . Receive status bits
+*/
+#define RS_ALGNERR      0x8000
+#define RS_BADCRC       0x2000
+#define RS_ODDFRAME     0x1000
+#define RS_TOOLONG      0x0800
+#define RS_TOOSHORT     0x0400
+#define RS_MULTICAST    0x0001
+#define RS_ERRORS       (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT) 
+
+static const char * interfaces[ 2 ] = { "TP", "AUI" };
+
+/*-------------------------------------------------------------------------
+ .  I define some macros to make it easier to do somewhat common
+ . or slightly complicated, repeated tasks. 
+ --------------------------------------------------------------------------*/
+
+/* select a register bank, 0 to 3  */
+
+#define SMC_SELECT_BANK(x)  { outw( x, ioaddr + BANK_SELECT ); } 
+
+/* define a small delay for the reset */
+#define SMC_DELAY() { inw( ioaddr + RCR );\
+                        inw( ioaddr + RCR );\
+                        inw( ioaddr + RCR );  }
+
+/* this enables an interrupt in the interrupt mask register */
+#define SMC_ENABLE_INT(x) {\
+                unsigned char mask;\
+                SMC_SELECT_BANK(2);\
+                mask = inb( ioaddr + INT_MASK );\
+                mask |= (x);\
+                outb( mask, ioaddr + INT_MASK ); \
+}
+
+/* this disables an interrupt from the interrupt mask register */
+
+#define SMC_DISABLE_INT(x) {\
+                unsigned char mask;\
+                SMC_SELECT_BANK(2);\
+                mask = inb( ioaddr + INT_MASK );\
+                mask &= ~(x);\
+                outb( mask, ioaddr + INT_MASK ); \
+}
+
+/*----------------------------------------------------------------------
+ . Define the interrupts that I want to receive from the card
+ . 
+ . I want: 
+ .  IM_EPH_INT, for nasty errors
+ .  IM_RCV_INT, for happy received packets
+ .  IM_RX_OVRN_INT, because I have to kick the receiver
+ --------------------------------------------------------------------------*/
+#define SMC_INTERRUPT_MASK   (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT) 
+
+#endif  /* _SMC_9194_H_ */
+