Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 615 insertions, 0 deletions

diff --git a/drivers/net/smc-ultra.c b/drivers/net/smc-ultra.c
new file mode 100644
index 000000000000..b564c677c6d2
--- /dev/null
+++ b/drivers/net/smc-ultra.c
@@ -0,0 +1,615 @@
+/* smc-ultra.c: A SMC Ultra ethernet driver for linux. */
+/*
+        This is a driver for the SMC Ultra and SMC EtherEZ ISA ethercards.
+
+        Written 1993-1998 by Donald Becker.
+
+        Copyright 1993 United States Government as represented by the
+        Director, National Security Agency.
+
+        This software may be used and distributed according to the terms
+        of the GNU General Public License, incorporated herein by reference.
+
+        The author may be reached as becker@scyld.com, or C/O
+        Scyld Computing Corporation
+        410 Severn Ave., Suite 210
+        Annapolis MD 21403
+
+        This driver uses the cards in the 8390-compatible mode.
+        Most of the run-time complexity is handled by the generic code in
+        8390.c.  The code in this file is responsible for
+
+                ultra_probe()           Detecting and initializing the card.
+                ultra_probe1()
+                ultra_probe_isapnp()
+
+                ultra_open()            The card-specific details of starting, stopping
+                ultra_reset_8390()      and resetting the 8390 NIC core.
+                ultra_close()
+
+                ultra_block_input()             Routines for reading and writing blocks of
+                ultra_block_output()    packet buffer memory.
+                ultra_pio_input()
+                ultra_pio_output()
+
+        This driver enables the shared memory only when doing the actual data
+        transfers to avoid a bug in early version of the card that corrupted
+        data transferred by a AHA1542.
+
+        This driver now supports the programmed-I/O (PIO) data transfer mode of
+        the EtherEZ. It does not use the non-8390-compatible "Altego" mode.
+        That support (if available) is in smc-ez.c.
+
+        Changelog:
+
+        Paul Gortmaker  : multiple card support for module users.
+        Donald Becker   : 4/17/96 PIO support, minor potential problems avoided.
+        Donald Becker   : 6/6/96 correctly set auto-wrap bit.
+        Alexander Sotirov : 1/20/01 Added support for ISAPnP cards
+
+        Note about the ISA PnP support:
+
+        This driver can not autoprobe for more than one SMC EtherEZ PnP card.
+        You have to configure the second card manually through the /proc/isapnp
+        interface and then load the module with an explicit io=0x___ option.
+*/
+
+static const char version[] =
+        "smc-ultra.c:v2.02 2/3/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/isapnp.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include "8390.h"
+
+#define DRV_NAME "smc-ultra"
+
+/* A zero-terminated list of I/O addresses to be probed. */
+static unsigned int ultra_portlist[] __initdata =
+{0x200, 0x220, 0x240, 0x280, 0x300, 0x340, 0x380, 0};
+
+static int ultra_probe1(struct net_device *dev, int ioaddr);
+
+#ifdef __ISAPNP__
+static int ultra_probe_isapnp(struct net_device *dev);
+#endif
+
+static int ultra_open(struct net_device *dev);
+static void ultra_reset_8390(struct net_device *dev);
+static void ultra_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+                                                int ring_page);
+static void ultra_block_input(struct net_device *dev, int count,
+                                                  struct sk_buff *skb, int ring_offset);
+static void ultra_block_output(struct net_device *dev, int count,
+                                                        const unsigned char *buf, const int start_page);
+static void ultra_pio_get_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+                                                int ring_page);
+static void ultra_pio_input(struct net_device *dev, int count,
+                                                  struct sk_buff *skb, int ring_offset);
+static void ultra_pio_output(struct net_device *dev, int count,
+                                                         const unsigned char *buf, const int start_page);
+static int ultra_close_card(struct net_device *dev);
+
+#ifdef __ISAPNP__
+static struct isapnp_device_id ultra_device_ids[] __initdata = {
+        {       ISAPNP_VENDOR('S','M','C'), ISAPNP_FUNCTION(0x8416),
+                ISAPNP_VENDOR('S','M','C'), ISAPNP_FUNCTION(0x8416),
+                (long) "SMC EtherEZ (8416)" },
+        { }     /* terminate list */
+};
+
+MODULE_DEVICE_TABLE(isapnp, ultra_device_ids);
+#endif
+
+
+#define START_PG                0x00    /* First page of TX buffer */
+
+#define ULTRA_CMDREG    0               /* Offset to ASIC command register. */
+#define  ULTRA_RESET    0x80    /* Board reset, in ULTRA_CMDREG. */
+#define  ULTRA_MEMENB   0x40    /* Enable the shared memory. */
+#define IOPD    0x02                    /* I/O Pipe Data (16 bits), PIO operation. */
+#define IOPA    0x07                    /* I/O Pipe Address for PIO operation. */
+#define ULTRA_NIC_OFFSET  16    /* NIC register offset from the base_addr. */
+#define ULTRA_IO_EXTENT 32
+#define EN0_ERWCNT              0x08    /* Early receive warning count. */
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void ultra_poll(struct net_device *dev)
+{
+        disable_irq(dev->irq);
+        ei_interrupt(dev->irq, dev, NULL);
+        enable_irq(dev->irq);
+}
+#endif
+/*      Probe for the Ultra.  This looks like a 8013 with the station
+        address PROM at I/O ports <base>+8 to <base>+13, with a checksum
+        following.
+*/
+
+static int __init do_ultra_probe(struct net_device *dev)
+{
+        int i;
+        int base_addr = dev->base_addr;
+        int irq = dev->irq;
+
+        SET_MODULE_OWNER(dev);
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+        dev->poll_controller = &ultra_poll;
+#endif
+        if (base_addr > 0x1ff)          /* Check a single specified location. */
+                return ultra_probe1(dev, base_addr);
+        else if (base_addr != 0)        /* Don't probe at all. */
+                return -ENXIO;
+
+#ifdef __ISAPNP__
+        /* Look for any installed ISAPnP cards */
+        if (isapnp_present() && (ultra_probe_isapnp(dev) == 0))
+                return 0;
+#endif
+
+        for (i = 0; ultra_portlist[i]; i++) {
+                dev->irq = irq;
+                if (ultra_probe1(dev, ultra_portlist[i]) == 0)
+                        return 0;
+        }
+
+        return -ENODEV;
+}
+
+static void cleanup_card(struct net_device *dev)
+{
+        /* NB: ultra_close_card() does free_irq */
+#ifdef __ISAPNP__
+        struct pnp_dev *idev = (struct pnp_dev *)ei_status.priv;
+        if (idev)
+                pnp_device_detach(idev);
+#endif
+        release_region(dev->base_addr - ULTRA_NIC_OFFSET, ULTRA_IO_EXTENT);
+        iounmap(ei_status.mem);
+}
+
+#ifndef MODULE
+struct net_device * __init ultra_probe(int unit)
+{
+        struct net_device *dev = alloc_ei_netdev();
+        int err;
+
+        if (!dev)
+                return ERR_PTR(-ENOMEM);
+
+        sprintf(dev->name, "eth%d", unit);
+        netdev_boot_setup_check(dev);
+
+        err = do_ultra_probe(dev);
+        if (err)
+                goto out;
+        err = register_netdev(dev);
+        if (err)
+                goto out1;
+        return dev;
+out1:
+        cleanup_card(dev);
+out:
+        free_netdev(dev);
+        return ERR_PTR(err);
+}
+#endif
+
+static int __init ultra_probe1(struct net_device *dev, int ioaddr)
+{
+        int i, retval;
+        int checksum = 0;
+        const char *model_name;
+        unsigned char eeprom_irq = 0;
+        static unsigned version_printed;
+        /* Values from various config regs. */
+        unsigned char num_pages, irqreg, addr, piomode;
+        unsigned char idreg = inb(ioaddr + 7);
+        unsigned char reg4 = inb(ioaddr + 4) & 0x7f;
+
+        if (!request_region(ioaddr, ULTRA_IO_EXTENT, DRV_NAME))
+                return -EBUSY;
+
+        /* Check the ID nibble. */
+        if ((idreg & 0xF0) != 0x20                      /* SMC Ultra */
+                && (idreg & 0xF0) != 0x40) {            /* SMC EtherEZ */
+                retval = -ENODEV;
+                goto out;
+        }
+
+        /* Select the station address register set. */
+        outb(reg4, ioaddr + 4);
+
+        for (i = 0; i < 8; i++)
+                checksum += inb(ioaddr + 8 + i);
+        if ((checksum & 0xff) != 0xFF) {
+                retval = -ENODEV;
+                goto out;
+        }
+
+        if (ei_debug  &&  version_printed++ == 0)
+                printk(version);
+
+        model_name = (idreg & 0xF0) == 0x20 ? "SMC Ultra" : "SMC EtherEZ";
+
+        printk("%s: %s at %#3x,", dev->name, model_name, ioaddr);
+
+        for (i = 0; i < 6; i++)
+                printk(" %2.2X", dev->dev_addr[i] = inb(ioaddr + 8 + i));
+
+        /* Switch from the station address to the alternate register set and
+           read the useful registers there. */
+        outb(0x80 | reg4, ioaddr + 4);
+
+        /* Enabled FINE16 mode to avoid BIOS ROM width mismatches @ reboot. */
+        outb(0x80 | inb(ioaddr + 0x0c), ioaddr + 0x0c);
+        piomode = inb(ioaddr + 0x8);
+        addr = inb(ioaddr + 0xb);
+        irqreg = inb(ioaddr + 0xd);
+
+        /* Switch back to the station address register set so that the MS-DOS driver
+           can find the card after a warm boot. */
+        outb(reg4, ioaddr + 4);
+
+        if (dev->irq < 2) {
+                unsigned char irqmap[] = {0, 9, 3, 5, 7, 10, 11, 15};
+                int irq;
+
+                /* The IRQ bits are split. */
+                irq = irqmap[((irqreg & 0x40) >> 4) + ((irqreg & 0x0c) >> 2)];
+
+                if (irq == 0) {
+                        printk(", failed to detect IRQ line.\n");
+                        retval =  -EAGAIN;
+                        goto out;
+                }
+                dev->irq = irq;
+                eeprom_irq = 1;
+        }
+
+        /* The 8390 isn't at the base address, so fake the offset */
+        dev->base_addr = ioaddr+ULTRA_NIC_OFFSET;
+
+        {
+                int addr_tbl[4] = {0x0C0000, 0x0E0000, 0xFC0000, 0xFE0000};
+                short num_pages_tbl[4] = {0x20, 0x40, 0x80, 0xff};
+
+                dev->mem_start = ((addr & 0x0f) << 13) + addr_tbl[(addr >> 6) & 3] ;
+                num_pages = num_pages_tbl[(addr >> 4) & 3];
+        }
+
+        ei_status.name = model_name;
+        ei_status.word16 = 1;
+        ei_status.tx_start_page = START_PG;
+        ei_status.rx_start_page = START_PG + TX_PAGES;
+        ei_status.stop_page = num_pages;
+
+        ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG)*256);
+        if (!ei_status.mem) {
+                printk(", failed to ioremap.\n");
+                retval =  -ENOMEM;
+                goto out;
+        }
+
+        dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG)*256;
+
+        if (piomode) {
+                printk(",%s IRQ %d programmed-I/O mode.\n",
+                           eeprom_irq ? "EEPROM" : "assigned ", dev->irq);
+                ei_status.block_input = &ultra_pio_input;
+                ei_status.block_output = &ultra_pio_output;
+                ei_status.get_8390_hdr = &ultra_pio_get_hdr;
+        } else {
+                printk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ",
+                           dev->irq, dev->mem_start, dev->mem_end-1);
+                ei_status.block_input = &ultra_block_input;
+                ei_status.block_output = &ultra_block_output;
+                ei_status.get_8390_hdr = &ultra_get_8390_hdr;
+        }
+        ei_status.reset_8390 = &ultra_reset_8390;
+        dev->open = &ultra_open;
+        dev->stop = &ultra_close_card;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+        dev->poll_controller = ei_poll;
+#endif
+        NS8390_init(dev, 0);
+
+        return 0;
+out:
+        release_region(ioaddr, ULTRA_IO_EXTENT);
+        return retval;
+}
+
+#ifdef __ISAPNP__
+static int __init ultra_probe_isapnp(struct net_device *dev)
+{
+        int i;
+
+        for (i = 0; ultra_device_ids[i].vendor != 0; i++) {
+                struct pnp_dev *idev = NULL;
+
+                while ((idev = pnp_find_dev(NULL,
+                                            ultra_device_ids[i].vendor,
+                                            ultra_device_ids[i].function,
+                                            idev))) {
+                        /* Avoid already found cards from previous calls */
+                        if (pnp_device_attach(idev) < 0)
+                                continue;
+                        if (pnp_activate_dev(idev) < 0) {
+                              __again:
+                                pnp_device_detach(idev);
+                                continue;
+                        }
+                        /* if no io and irq, search for next */
+                        if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0))
+                                goto __again;
+                        /* found it */
+                        dev->base_addr = pnp_port_start(idev, 0);
+                        dev->irq = pnp_irq(idev, 0);
+                        printk(KERN_INFO "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n",
+                                (char *) ultra_device_ids[i].driver_data,
+                                dev->base_addr, dev->irq);
+                        if (ultra_probe1(dev, dev->base_addr) != 0) {      /* Shouldn't happen. */
+                                printk(KERN_ERR "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr);
+                                pnp_device_detach(idev);
+                                return -ENXIO;
+                        }
+                        ei_status.priv = (unsigned long)idev;
+                        break;
+                }
+                if (!idev)
+                        continue;
+                return 0;
+        }
+
+        return -ENODEV;
+}
+#endif
+
+static int
+ultra_open(struct net_device *dev)
+{
+        int retval;
+        int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
+        unsigned char irq2reg[] = {0, 0, 0x04, 0x08, 0, 0x0C, 0, 0x40,
+                                   0, 0x04, 0x44, 0x48, 0, 0, 0, 0x4C, };
+
+        retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev);
+        if (retval)
+                return retval;
+
+        outb(0x00, ioaddr);     /* Disable shared memory for safety. */
+        outb(0x80, ioaddr + 5);
+        /* Set the IRQ line. */
+        outb(inb(ioaddr + 4) | 0x80, ioaddr + 4);
+        outb((inb(ioaddr + 13) & ~0x4C) | irq2reg[dev->irq], ioaddr + 13);
+        outb(inb(ioaddr + 4) & 0x7f, ioaddr + 4);
+
+        if (ei_status.block_input == &ultra_pio_input) {
+                outb(0x11, ioaddr + 6);         /* Enable interrupts and PIO. */
+                outb(0x01, ioaddr + 0x19);      /* Enable ring read auto-wrap. */
+        } else
+                outb(0x01, ioaddr + 6);         /* Enable interrupts and memory. */
+        /* Set the early receive warning level in window 0 high enough not
+           to receive ERW interrupts. */
+        outb_p(E8390_NODMA+E8390_PAGE0, dev->base_addr);
+        outb(0xff, dev->base_addr + EN0_ERWCNT);
+        ei_open(dev);
+        return 0;
+}
+
+static void
+ultra_reset_8390(struct net_device *dev)
+{
+        int cmd_port = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC base addr */
+
+        outb(ULTRA_RESET, cmd_port);
+        if (ei_debug > 1) printk("resetting Ultra, t=%ld...", jiffies);
+        ei_status.txing = 0;
+
+        outb(0x00, cmd_port);   /* Disable shared memory for safety. */
+        outb(0x80, cmd_port + 5);
+        if (ei_status.block_input == &ultra_pio_input)
+                outb(0x11, cmd_port + 6);               /* Enable interrupts and PIO. */
+        else
+                outb(0x01, cmd_port + 6);               /* Enable interrupts and memory. */
+
+        if (ei_debug > 1) printk("reset done\n");
+        return;
+}
+
+/* Grab the 8390 specific header. Similar to the block_input routine, but
+   we don't need to be concerned with ring wrap as the header will be at
+   the start of a page, so we optimize accordingly. */
+
+static void
+ultra_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+        void __iomem *hdr_start = ei_status.mem + ((ring_page - START_PG)<<8);
+
+        outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET);  /* shmem on */
+#ifdef __BIG_ENDIAN
+        /* Officially this is what we are doing, but the readl() is faster */
+        /* unfortunately it isn't endian aware of the struct               */
+        memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
+        hdr->count = le16_to_cpu(hdr->count);
+#else
+        ((unsigned int*)hdr)[0] = readl(hdr_start);
+#endif
+        outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* shmem off */
+}
+
+/* Block input and output are easy on shared memory ethercards, the only
+   complication is when the ring buffer wraps. */
+
+static void
+ultra_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+{
+        void __iomem *xfer_start = ei_status.mem + ring_offset - (START_PG<<8);
+
+        /* Enable shared memory. */
+        outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET);
+
+        if (ring_offset + count > ei_status.stop_page*256) {
+                /* We must wrap the input move. */
+                int semi_count = ei_status.stop_page*256 - ring_offset;
+                memcpy_fromio(skb->data, xfer_start, semi_count);
+                count -= semi_count;
+                memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count);
+        } else {
+                /* Packet is in one chunk -- we can copy + cksum. */
+                eth_io_copy_and_sum(skb, xfer_start, count, 0);
+        }
+
+        outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET);  /* Disable memory. */
+}
+
+static void
+ultra_block_output(struct net_device *dev, int count, const unsigned char *buf,
+                                int start_page)
+{
+        void __iomem *shmem = ei_status.mem + ((start_page - START_PG)<<8);
+
+        /* Enable shared memory. */
+        outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET);
+
+        memcpy_toio(shmem, buf, count);
+
+        outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* Disable memory. */
+}
+
+/* The identical operations for programmed I/O cards.
+   The PIO model is trivial to use: the 16 bit start address is written
+   byte-sequentially to IOPA, with no intervening I/O operations, and the
+   data is read or written to the IOPD data port.
+   The only potential complication is that the address register is shared
+   and must be always be rewritten between each read/write direction change.
+   This is no problem for us, as the 8390 code ensures that we are single
+   threaded. */
+static void ultra_pio_get_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+                                                int ring_page)
+{
+        int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
+        outb(0x00, ioaddr + IOPA);      /* Set the address, LSB first. */
+        outb(ring_page, ioaddr + IOPA);
+        insw(ioaddr + IOPD, hdr, sizeof(struct e8390_pkt_hdr)>>1);
+}
+
+static void ultra_pio_input(struct net_device *dev, int count,
+                                                  struct sk_buff *skb, int ring_offset)
+{
+        int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
+    char *buf = skb->data;
+
+        /* For now set the address again, although it should already be correct. */
+        outb(ring_offset, ioaddr + IOPA);       /* Set the address, LSB first. */
+        outb(ring_offset >> 8, ioaddr + IOPA);
+        /* We know skbuffs are padded to at least word alignment. */
+        insw(ioaddr + IOPD, buf, (count+1)>>1);
+}
+
+static void ultra_pio_output(struct net_device *dev, int count,
+                                                        const unsigned char *buf, const int start_page)
+{
+        int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
+        outb(0x00, ioaddr + IOPA);      /* Set the address, LSB first. */
+        outb(start_page, ioaddr + IOPA);
+        /* An extra odd byte is OK here as well. */
+        outsw(ioaddr + IOPD, buf, (count+1)>>1);
+}
+
+static int
+ultra_close_card(struct net_device *dev)
+{
+        int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* CMDREG */
+
+        netif_stop_queue(dev);
+
+        if (ei_debug > 1)
+                printk("%s: Shutting down ethercard.\n", dev->name);
+
+        outb(0x00, ioaddr + 6);         /* Disable interrupts. */
+        free_irq(dev->irq, dev);
+
+        NS8390_init(dev, 0);
+
+        /* We should someday disable shared memory and change to 8-bit mode
+           "just in case"... */
+
+        return 0;
+}
+
+
+#ifdef MODULE
+#define MAX_ULTRA_CARDS 4       /* Max number of Ultra cards per module */
+static struct net_device *dev_ultra[MAX_ULTRA_CARDS];
+static int io[MAX_ULTRA_CARDS];
+static int irq[MAX_ULTRA_CARDS];
+
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(io, "I/O base address(es)");
+MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
+MODULE_DESCRIPTION("SMC Ultra/EtherEZ ISA/PnP Ethernet driver");
+MODULE_LICENSE("GPL");
+
+/* This is set up so that only a single autoprobe takes place per call.
+ISA device autoprobes on a running machine are not recommended. */
+int
+init_module(void)
+{
+        struct net_device *dev;
+        int this_dev, found = 0;
+
+        for (this_dev = 0; this_dev < MAX_ULTRA_CARDS; this_dev++) {
+                if (io[this_dev] == 0)  {
+                        if (this_dev != 0) break; /* only autoprobe 1st one */
+                        printk(KERN_NOTICE "smc-ultra.c: Presently autoprobing (not recommended) for a single card.\n");
+                }
+                dev = alloc_ei_netdev();
+                if (!dev)
+                        break;
+                dev->irq = irq[this_dev];
+                dev->base_addr = io[this_dev];
+                if (do_ultra_probe(dev) == 0) {
+                        if (register_netdev(dev) == 0) {
+                                dev_ultra[found++] = dev;
+                                continue;
+                        }
+                        cleanup_card(dev);
+                }
+                free_netdev(dev);
+                printk(KERN_WARNING "smc-ultra.c: No SMC Ultra card found (i/o = 0x%x).\n", io[this_dev]);
+                break;
+        }
+        if (found)
+                return 0;
+        return -ENXIO;
+}
+
+void
+cleanup_module(void)
+{
+        int this_dev;
+
+        for (this_dev = 0; this_dev < MAX_ULTRA_CARDS; this_dev++) {
+                struct net_device *dev = dev_ultra[this_dev];
+                if (dev) {
+                        unregister_netdev(dev);
+                        cleanup_card(dev);
+                        free_netdev(dev);
+                }
+        }
+}
+#endif /* MODULE */