[PATCH] sky2: yukon-ec-u chipset initialization

Add more complete setup code for Yukon EC_U chipset.
Based on matching code in 8.31 code in SysKonnect vendor driver.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

1 files changed, 49 insertions, 10 deletions

diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index fd12c289a238..d1c71f50d8b9 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -5,14 +5,22 @@
 #define _SKY2_H
 
 /* PCI config registers */
-#define PCI_DEV_REG1    0x40
-#define PCI_DEV_REG2    0x44
-#define PCI_DEV_STATUS  0x7c
-#define PCI_OS_PCI_X    (1<<26)
+enum {
+        PCI_DEV_REG1    = 0x40,
+        PCI_DEV_REG2    = 0x44,
+        PCI_DEV_STATUS  = 0x7c,
+        PCI_DEV_REG3    = 0x80,
+        PCI_DEV_REG4    = 0x84,
+        PCI_DEV_REG5    = 0x88,
+};
 
-#define PEX_LNK_STAT    0xf2
-#define PEX_UNC_ERR_STAT 0x104
-#define PEX_DEV_CTRL    0xe8
+enum {
+        PEX_DEV_CAP     = 0xe4,
+        PEX_DEV_CTRL    = 0xe8,
+        PEX_DEV_STA     = 0xea,
+        PEX_LNK_STAT    = 0xf2,
+        PEX_UNC_ERR_STAT= 0x104,
+};
 
 /* Yukon-2 */
 enum pci_dev_reg_1 {
@@ -37,6 +45,25 @@ enum pci_dev_reg_2 {
         PCI_USEDATA64   = 1<<0,         /* Use 64Bit Data bus ext */
 };
 
+/*      PCI_OUR_REG_4           32 bit  Our Register 4 (Yukon-ECU only) */
+enum pci_dev_reg_4 {
+                                        /* (Link Training & Status State Machine) */
+        P_TIMER_VALUE_MSK       = 0xffL<<16,    /* Bit 23..16:  Timer Value Mask */
+                                        /* (Active State Power Management) */
+        P_FORCE_ASPM_REQUEST    = 1<<15, /* Force ASPM Request (A1 only) */
+        P_ASPM_GPHY_LINK_DOWN   = 1<<14, /* GPHY Link Down (A1 only) */
+        P_ASPM_INT_FIFO_EMPTY   = 1<<13, /* Internal FIFO Empty (A1 only) */
+        P_ASPM_CLKRUN_REQUEST   = 1<<12, /* CLKRUN Request (A1 only) */
+
+        P_ASPM_FORCE_CLKREQ_ENA = 1<<4, /* Force CLKREQ Enable (A1b only) */
+        P_ASPM_CLKREQ_PAD_CTL   = 1<<3, /* CLKREQ PAD Control (A1 only) */
+        P_ASPM_A1_MODE_SELECT   = 1<<2, /* A1 Mode Select (A1 only) */
+        P_CLK_GATE_PEX_UNIT_ENA = 1<<1, /* Enable Gate PEX Unit Clock */
+        P_CLK_GATE_ROOT_COR_ENA = 1<<0, /* Enable Gate Root Core Clock */
+        P_ASPM_CONTROL_MSK      = P_FORCE_ASPM_REQUEST | P_ASPM_GPHY_LINK_DOWN
+                                  | P_ASPM_CLKRUN_REQUEST | P_ASPM_INT_FIFO_EMPTY,
+};
+
 
 #define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
                                PCI_STATUS_SIG_SYSTEM_ERROR | \
@@ -507,6 +534,16 @@ enum {
 };
 #define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
 
+/*      Q_F                             32 bit  Flag Register */
+enum {
+        F_ALM_FULL      = 1<<27, /* Rx FIFO: almost full */
+        F_EMPTY         = 1<<27, /* Tx FIFO: empty flag */
+        F_FIFO_EOF      = 1<<26, /* Tag (EOF Flag) bit in FIFO */
+        F_WM_REACHED    = 1<<25, /* Watermark reached */
+        F_M_RX_RAM_DIS  = 1<<24, /* MAC Rx RAM Read Port disable */
+        F_FIFO_LEVEL    = 0x1fL<<16, /* Bit 23..16:     # of Qwords in FIFO */
+        F_WATER_MARK    = 0x0007ffL, /* Bit 10.. 0:     Watermark */
+};
 
 /* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
 enum {
@@ -909,10 +946,12 @@ enum {
         PHY_BCOM_ID1_C0 = 0x6044,
         PHY_BCOM_ID1_C5 = 0x6047,
 
-        PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
+        PHY_MARV_ID1_B0 = 0x0C23, /* Yukon      (PHY 88E1011) */
         PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */
-        PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
-        PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
+        PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC   (PHY 88E1111) */
+        PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2    (PHY 88E1112) */
+        PHY_MARV_ID1_FE = 0x0C83, /* Yukon-FE   (PHY 88E3082 Rev.A1) */
+        PHY_MARV_ID1_ECU= 0x0CB0, /* Yukon-ECU  (PHY 88E1149 Rev.B2?) */
 };
 
 /* Advertisement register bits */