sky2: fix receive pause thresholds

Program the receive pause thresholds differently depending on
chip version. This cloned from from the vendor (GPL) driver.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 8 insertions, 2 deletions

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index e961a8696cfb..70524f2658dd 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -926,8 +926,14 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 
         /* On chips without ram buffer, pause is controled by MAC level */
         if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
-                sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
-                sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
+                /* Pause threshold is scaled by 8 in bytes */
+                if (hw->chip_id == CHIP_ID_YUKON_FE_P
+                        && hw->chip_rev == CHIP_REV_YU_FE2_A0)
+                        reg = 1568 / 8;
+                else
+                        reg = 1024 / 8;
+                sky2_write16(hw, SK_REG(port, RX_GMF_UP_THR), reg);
+                sky2_write16(hw, SK_REG(port, RX_GMF_LP_THR), 768 / 8);
 
                 sky2_set_tx_stfwd(hw, port);
         }