sky2: fix LED management

Fix problems in LED management, so ethtool -p works correctly on Yukon-EC
and other chips. The driver was incorrectly setting the PHY LED overide bits.
Moral: read the spec sheet, not the vendor driver.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 61 insertions, 62 deletions

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 9a6295909e43..54c662690f65 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -572,8 +572,9 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
         default:
                 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
                 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
+
                 /* turn off the Rx LED (LED_RX) */
-                ledover &= ~PHY_M_LED_MO_RX;
+                ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
         }
 
         if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
@@ -602,7 +603,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 
                 if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
                         /* turn on 100 Mbps LED (LED_LINK100) */
-                        ledover |= PHY_M_LED_MO_100;
+                        ledover |= PHY_M_LED_MO_100(MO_LED_ON);
                 }
 
                 if (ledover)
@@ -3322,82 +3323,80 @@ static void sky2_set_multicast(struct net_device *dev)
 /* Can have one global because blinking is controlled by
  * ethtool and that is always under RTNL mutex
  */
-static void sky2_led(struct sky2_hw *hw, unsigned port, int on)
+static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
 {
-        u16 pg;
+        struct sky2_hw *hw = sky2->hw;
+        unsigned port = sky2->port;
 
-        switch (hw->chip_id) {
-        case CHIP_ID_YUKON_XL:
+        spin_lock_bh(&sky2->phy_lock);
+        if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
+            hw->chip_id == CHIP_ID_YUKON_EX ||
+            hw->chip_id == CHIP_ID_YUKON_SUPR) {
+                u16 pg;
                 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
                 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-                gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
-                             on ? (PHY_M_LEDC_LOS_CTRL(1) |
-                                   PHY_M_LEDC_INIT_CTRL(7) |
-                                   PHY_M_LEDC_STA1_CTRL(7) |
-                                   PHY_M_LEDC_STA0_CTRL(7))
-                             : 0);
 
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
-                break;
+                switch (mode) {
+                case MO_LED_OFF:
+                        gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+                                     PHY_M_LEDC_LOS_CTRL(8) |
+                                     PHY_M_LEDC_INIT_CTRL(8) |
+                                     PHY_M_LEDC_STA1_CTRL(8) |
+                                     PHY_M_LEDC_STA0_CTRL(8));
+                        break;
+                case MO_LED_ON:
+                        gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+                                     PHY_M_LEDC_LOS_CTRL(9) |
+                                     PHY_M_LEDC_INIT_CTRL(9) |
+                                     PHY_M_LEDC_STA1_CTRL(9) |
+                                     PHY_M_LEDC_STA0_CTRL(9));
+                        break;
+                case MO_LED_BLINK:
+                        gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+                                     PHY_M_LEDC_LOS_CTRL(0xa) |
+                                     PHY_M_LEDC_INIT_CTRL(0xa) |
+                                     PHY_M_LEDC_STA1_CTRL(0xa) |
+                                     PHY_M_LEDC_STA0_CTRL(0xa));
+                        break;
+                case MO_LED_NORM:
+                        gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+                                     PHY_M_LEDC_LOS_CTRL(1) |
+                                     PHY_M_LEDC_INIT_CTRL(8) |
+                                     PHY_M_LEDC_STA1_CTRL(7) |
+                                     PHY_M_LEDC_STA0_CTRL(7));
+                }
 
-        default:
-                gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+        } else
                 gm_phy_write(hw, port, PHY_MARV_LED_OVER, 
-                             on ? PHY_M_LED_ALL : 0);
-        }
+                                     PHY_M_LED_MO_DUP(mode) |
+                                     PHY_M_LED_MO_10(mode) |
+                                     PHY_M_LED_MO_100(mode) |
+                                     PHY_M_LED_MO_1000(mode) |
+                                     PHY_M_LED_MO_RX(mode) |
+                                     PHY_M_LED_MO_TX(mode));
+
+        spin_unlock_bh(&sky2->phy_lock);
 }
 
 /* blink LED's for finding board */
 static int sky2_phys_id(struct net_device *dev, u32 data)
 {
         struct sky2_port *sky2 = netdev_priv(dev);
-        struct sky2_hw *hw = sky2->hw;
-        unsigned port = sky2->port;
-        u16 ledctrl, ledover = 0;
-        long ms;
-        int interrupted;
-        int onoff = 1;
+        unsigned int i;
 
-        if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ))
-                ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT);
-        else
-                ms = data * 1000;
-
-        /* save initial values */
-        spin_lock_bh(&sky2->phy_lock);
-        if (hw->chip_id == CHIP_ID_YUKON_XL) {
-                u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-                ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
-        } else {
-                ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL);
-                ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER);
-        }
-
-        interrupted = 0;
-        while (!interrupted && ms > 0) {
-                sky2_led(hw, port, onoff);
-                onoff = !onoff;
-
-                spin_unlock_bh(&sky2->phy_lock);
-                interrupted = msleep_interruptible(250);
-                spin_lock_bh(&sky2->phy_lock);
-
-                ms -= 250;
-        }
+        if (data == 0)
+                data = UINT_MAX;
 
-        /* resume regularly scheduled programming */
-        if (hw->chip_id == CHIP_ID_YUKON_XL) {
-                u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-                gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl);
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
-        } else {
-                gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
-                gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+        for (i = 0; i < data; i++) {
+                sky2_led(sky2, MO_LED_ON);
+                if (msleep_interruptible(500))
+                        break;
+                sky2_led(sky2, MO_LED_OFF);
+                if (msleep_interruptible(500))
+                        break;
         }
-        spin_unlock_bh(&sky2->phy_lock);
+        sky2_led(sky2, MO_LED_NORM);
 
         return 0;
 }