Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 213 insertions, 0 deletions

diff --git a/drivers/net/sk98lin/sklm80.c b/drivers/net/sk98lin/sklm80.c
new file mode 100644
index 000000000000..68292d18175b
--- /dev/null
+++ b/drivers/net/sk98lin/sklm80.c
@@ -0,0 +1,213 @@
+/******************************************************************************
+ *
+ * Name:        sklm80.c
+ * Project:     Gigabit Ethernet Adapters, TWSI-Module
+ * Version:     $Revision: 1.22 $
+ * Date:        $Date: 2003/10/20 09:08:21 $
+ * Purpose:     Functions to access Voltage and Temperature Sensor (LM80)
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *      (C)Copyright 1998-2002 SysKonnect.
+ *      (C)Copyright 2002-2003 Marvell.
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+        LM80 functions
+*/
+#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
+static const char SysKonnectFileId[] =
+        "@(#) $Id: sklm80.c,v 1.22 2003/10/20 09:08:21 rschmidt Exp $ (C) Marvell. ";
+#endif
+
+#include "h/skdrv1st.h"         /* Driver Specific Definitions */
+#include "h/lm80.h"
+#include "h/skdrv2nd.h"         /* Adapter Control- and Driver specific Def. */
+
+#ifdef  SK_DIAG
+#define BREAK_OR_WAIT(pAC,IoC,Event)    SkI2cWait(pAC,IoC,Event)
+#else   /* nSK_DIAG */
+#define BREAK_OR_WAIT(pAC,IoC,Event)    break
+#endif  /* nSK_DIAG */
+
+#ifdef  SK_DIAG
+/*
+ * read the register 'Reg' from the device 'Dev'
+ *
+ * return       read error      -1
+ *              success         the read value
+ */
+int     SkLm80RcvReg(
+SK_IOC  IoC,            /* Adapter Context */
+int             Dev,            /* I2C device address */
+int             Reg)            /* register to read */
+{
+        int     Val = 0;
+        int     TempExt;
+
+        /* Signal device number */
+        if (SkI2cSndDev(IoC, Dev, I2C_WRITE)) {
+                return(-1);
+        }
+
+        if (SkI2cSndByte(IoC, Reg)) {
+                return(-1);
+        }
+
+        /* repeat start */
+        if (SkI2cSndDev(IoC, Dev, I2C_READ)) {
+                return(-1);
+        }
+
+        switch (Reg) {
+        case LM80_TEMP_IN:
+                Val = (int)SkI2cRcvByte(IoC, 1);
+
+                /* First: correct the value: it might be negative */
+                if ((Val & 0x80) != 0) {
+                        /* Value is negative */
+                        Val = Val - 256;
+                }
+                Val = Val * SK_LM80_TEMP_LSB;
+                SkI2cStop(IoC);
+                
+                TempExt = (int)SkLm80RcvReg(IoC, LM80_ADDR, LM80_TEMP_CTRL);
+                
+                if (Val > 0) {
+                        Val += ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);
+                }
+                else {
+                        Val -= ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);
+                }
+                return(Val);
+                break;
+        case LM80_VT0_IN:
+        case LM80_VT1_IN:
+        case LM80_VT2_IN:
+        case LM80_VT3_IN:
+                Val = (int)SkI2cRcvByte(IoC, 1) * SK_LM80_VT_LSB;
+                break;
+        
+        default:
+                Val = (int)SkI2cRcvByte(IoC, 1);
+                break;
+        }
+
+        SkI2cStop(IoC);
+        return(Val);
+}
+#endif  /* SK_DIAG */
+
+/*
+ * read a sensors value (LM80 specific)
+ *
+ * This function reads a sensors value from the I2C sensor chip LM80.
+ * The sensor is defined by its index into the sensors database in the struct
+ * pAC points to.
+ *
+ * Returns      1 if the read is completed
+ *              0 if the read must be continued (I2C Bus still allocated)
+ */
+int SkLm80ReadSensor(
+SK_AC           *pAC,   /* Adapter Context */
+SK_IOC          IoC,    /* I/O Context needed in level 1 and 2 */
+SK_SENSOR       *pSen)  /* Sensor to be read */
+{
+        SK_I32          Value;
+
+        switch (pSen->SenState) {
+        case SK_SEN_IDLE:
+                /* Send address to ADDR register */
+                SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, pSen->SenReg, 0);
+
+                pSen->SenState = SK_SEN_VALUE ;
+                BREAK_OR_WAIT(pAC, IoC, I2C_READ);
+        
+        case SK_SEN_VALUE:
+                /* Read value from data register */
+                SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
+                
+                Value &= 0xff; /* only least significant byte is valid */
+
+                /* Do NOT check the Value against the thresholds */
+                /* Checking is done in the calling instance */
+
+                if (pSen->SenType == SK_SEN_VOLT) {
+                        /* Voltage sensor */
+                        pSen->SenValue = Value * SK_LM80_VT_LSB;
+                        pSen->SenState = SK_SEN_IDLE ;
+                        return(1);
+                }
+
+                if (pSen->SenType == SK_SEN_FAN) {
+                        if (Value != 0 && Value != 0xff) {
+                                /* Fan speed counter */
+                                pSen->SenValue = SK_LM80_FAN_FAKTOR/Value;
+                        }
+                        else {
+                                /* Indicate Fan error */
+                                pSen->SenValue = 0;
+                        }
+                        pSen->SenState = SK_SEN_IDLE ;
+                        return(1);
+                }
+
+                /* First: correct the value: it might be negative */
+                if ((Value & 0x80) != 0) {
+                        /* Value is negative */
+                        Value = Value - 256;
+                }
+
+                /* We have a temperature sensor and need to get the signed extension.
+                 * For now we get the extension from the last reading, so in the normal
+                 * case we won't see flickering temperatures.
+                 */
+                pSen->SenValue = (Value * SK_LM80_TEMP_LSB) +
+                        (pSen->SenValue % SK_LM80_TEMP_LSB);
+
+                /* Send address to ADDR register */
+                SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, LM80_TEMP_CTRL, 0);
+
+                pSen->SenState = SK_SEN_VALEXT ;
+                BREAK_OR_WAIT(pAC, IoC, I2C_READ);
+        
+        case SK_SEN_VALEXT:
+                /* Read value from data register */
+                SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
+                Value &= LM80_TEMP_LSB_9; /* only bit 7 is valid */
+
+                /* cut the LSB bit */
+                pSen->SenValue = ((pSen->SenValue / SK_LM80_TEMP_LSB) *
+                        SK_LM80_TEMP_LSB);
+
+                if (pSen->SenValue < 0) {
+                        /* Value negative: The bit value must be subtracted */
+                        pSen->SenValue -= ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
+                }
+                else {
+                        /* Value positive: The bit value must be added */
+                        pSen->SenValue += ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
+                }
+
+                pSen->SenState = SK_SEN_IDLE ;
+                return(1);
+        
+        default:
+                SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E007, SKERR_I2C_E007MSG);
+                return(1);
+        }
+
+        /* Not completed */
+        return(0);
+}
+