aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/sgiseeq.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/sgiseeq.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/sgiseeq.h')
-rw-r--r--drivers/net/sgiseeq.h103
1 files changed, 103 insertions, 0 deletions
diff --git a/drivers/net/sgiseeq.h b/drivers/net/sgiseeq.h
new file mode 100644
index 000000000000..ebcca688dac4
--- /dev/null
+++ b/drivers/net/sgiseeq.h
@@ -0,0 +1,103 @@
1/*
2 * sgiseeq.h: Defines for the Seeq8003 ethernet controller.
3 *
4 * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
5 */
6#ifndef _SGISEEQ_H
7#define _SGISEEQ_H
8
9struct sgiseeq_wregs {
10 volatile unsigned int multicase_high[2];
11 volatile unsigned int frame_gap;
12 volatile unsigned int control;
13};
14
15struct sgiseeq_rregs {
16 volatile unsigned int collision_tx[2];
17 volatile unsigned int collision_all[2];
18 volatile unsigned int _unused0;
19 volatile unsigned int rflags;
20};
21
22struct sgiseeq_regs {
23 union {
24 volatile unsigned int eth_addr[6];
25 volatile unsigned int multicast_low[6];
26 struct sgiseeq_wregs wregs;
27 struct sgiseeq_rregs rregs;
28 } rw;
29 volatile unsigned int rstat;
30 volatile unsigned int tstat;
31};
32
33/* Seeq8003 receive status register */
34#define SEEQ_RSTAT_OVERF 0x001 /* Overflow */
35#define SEEQ_RSTAT_CERROR 0x002 /* CRC error */
36#define SEEQ_RSTAT_DERROR 0x004 /* Dribble error */
37#define SEEQ_RSTAT_SFRAME 0x008 /* Short frame */
38#define SEEQ_RSTAT_REOF 0x010 /* Received end of frame */
39#define SEEQ_RSTAT_FIG 0x020 /* Frame is good */
40#define SEEQ_RSTAT_TIMEO 0x040 /* Timeout, or late receive */
41#define SEEQ_RSTAT_WHICH 0x080 /* Which status, 1=old 0=new */
42#define SEEQ_RSTAT_LITTLE 0x100 /* DMA is done in little endian format */
43#define SEEQ_RSTAT_SDMA 0x200 /* DMA has started */
44#define SEEQ_RSTAT_ADMA 0x400 /* DMA is active */
45#define SEEQ_RSTAT_ROVERF 0x800 /* Receive buffer overflow */
46
47/* Seeq8003 receive command register */
48#define SEEQ_RCMD_RDISAB 0x000 /* Disable receiver on the Seeq8003 */
49#define SEEQ_RCMD_IOVERF 0x001 /* IRQ on buffer overflows */
50#define SEEQ_RCMD_ICRC 0x002 /* IRQ on CRC errors */
51#define SEEQ_RCMD_IDRIB 0x004 /* IRQ on dribble errors */
52#define SEEQ_RCMD_ISHORT 0x008 /* IRQ on short frames */
53#define SEEQ_RCMD_IEOF 0x010 /* IRQ on end of frame */
54#define SEEQ_RCMD_IGOOD 0x020 /* IRQ on good frames */
55#define SEEQ_RCMD_RANY 0x040 /* Receive any frame */
56#define SEEQ_RCMD_RBCAST 0x080 /* Receive broadcasts */
57#define SEEQ_RCMD_RBMCAST 0x0c0 /* Receive broadcasts/multicasts */
58
59/* Seeq8003 transmit status register */
60#define SEEQ_TSTAT_UFLOW 0x001 /* Transmit buffer underflow */
61#define SEEQ_TSTAT_CLS 0x002 /* Collision detected */
62#define SEEQ_TSTAT_R16 0x004 /* Did 16 retries to tx a frame */
63#define SEEQ_TSTAT_PTRANS 0x008 /* Packet was transmitted ok */
64#define SEEQ_TSTAT_LCLS 0x010 /* Late collision occurred */
65#define SEEQ_TSTAT_WHICH 0x080 /* Which status, 1=old 0=new */
66#define SEEQ_TSTAT_TLE 0x100 /* DMA is done in little endian format */
67#define SEEQ_TSTAT_SDMA 0x200 /* DMA has started */
68#define SEEQ_TSTAT_ADMA 0x400 /* DMA is active */
69
70/* Seeq8003 transmit command register */
71#define SEEQ_TCMD_RB0 0x00 /* Register bank zero w/station addr */
72#define SEEQ_TCMD_IUF 0x01 /* IRQ on tx underflow */
73#define SEEQ_TCMD_IC 0x02 /* IRQ on collisions */
74#define SEEQ_TCMD_I16 0x04 /* IRQ after 16 failed attempts to tx frame */
75#define SEEQ_TCMD_IPT 0x08 /* IRQ when packet successfully transmitted */
76#define SEEQ_TCMD_RB1 0x20 /* Register bank one w/multi-cast low byte */
77#define SEEQ_TCMD_RB2 0x40 /* Register bank two w/multi-cast high byte */
78
79/* Seeq8003 control register */
80#define SEEQ_CTRL_XCNT 0x01
81#define SEEQ_CTRL_ACCNT 0x02
82#define SEEQ_CTRL_SFLAG 0x04
83#define SEEQ_CTRL_EMULTI 0x08
84#define SEEQ_CTRL_ESHORT 0x10
85#define SEEQ_CTRL_ENCARR 0x20
86
87/* Seeq8003 control registers on the SGI Hollywood HPC. */
88#define SEEQ_HPIO_P1BITS 0x00000001 /* cycles to stay in P1 phase for PIO */
89#define SEEQ_HPIO_P2BITS 0x00000060 /* cycles to stay in P2 phase for PIO */
90#define SEEQ_HPIO_P3BITS 0x00000100 /* cycles to stay in P3 phase for PIO */
91#define SEEQ_HDMA_D1BITS 0x00000006 /* cycles to stay in D1 phase for DMA */
92#define SEEQ_HDMA_D2BITS 0x00000020 /* cycles to stay in D2 phase for DMA */
93#define SEEQ_HDMA_D3BITS 0x00000000 /* cycles to stay in D3 phase for DMA */
94#define SEEQ_HDMA_TIMEO 0x00030000 /* cycles for DMA timeout */
95#define SEEQ_HCTL_NORM 0x00000000 /* Normal operation mode */
96#define SEEQ_HCTL_RESET 0x00000001 /* Reset Seeq8003 and HPC interface */
97#define SEEQ_HCTL_IPEND 0x00000002 /* IRQ is pending for the chip */
98#define SEEQ_HCTL_IPG 0x00001000 /* Inter-packet gap */
99#define SEEQ_HCTL_RFIX 0x00002000 /* At rxdc, clear end-of-packet */
100#define SEEQ_HCTL_EFIX 0x00004000 /* fixes intr status bit settings */
101#define SEEQ_HCTL_IFIX 0x00008000 /* enable startup timeouts */
102
103#endif /* !(_SGISEEQ_H) */