sfc: Use lm87 and lm90 drivers for board temperature/power monitoring

Add board monitoring to periodic work whenever link is down.
For SFE4001, report when a fault has caused the PHY to turn off.
For SFE4002, switch XFP PHY into low-power state in case of a fault.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 136 insertions, 0 deletions

diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c
index 99e602373269..edf026280bec 100644
--- a/drivers/net/sfc/boards.c
+++ b/drivers/net/sfc/boards.c
@@ -11,6 +11,7 @@
 #include "phy.h"
 #include "boards.h"
 #include "efx.h"
+#include "workarounds.h"
 
 /* Macros for unpacking the board revision */
 /* The revision info is in host byte order. */
@@ -52,9 +53,128 @@ static void board_blink(struct efx_nic *efx, bool blink)
 }
 
 /*****************************************************************************
+ * Support for LM87 sensor chip used on several boards
+ */
+#define LM87_REG_ALARMS1                0x41
+#define LM87_REG_ALARMS2                0x42
+#define LM87_IN_LIMITS(nr, _min, _max)                  \
+        0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min
+#define LM87_AIN_LIMITS(nr, _min, _max)                 \
+        0x3B + (nr), _max, 0x1A + (nr), _min
+#define LM87_TEMP_INT_LIMITS(_min, _max)                \
+        0x39, _max, 0x3A, _min
+#define LM87_TEMP_EXT1_LIMITS(_min, _max)               \
+        0x37, _max, 0x38, _min
+
+#define LM87_ALARM_TEMP_INT             0x10
+#define LM87_ALARM_TEMP_EXT1            0x20
+
+#if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE)
+
+static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
+                         const u8 *reg_values)
+{
+        struct i2c_client *client = i2c_new_device(&efx->i2c_adap, info);
+        int rc;
+
+        if (!client)
+                return -EIO;
+
+        while (*reg_values) {
+                u8 reg = *reg_values++;
+                u8 value = *reg_values++;
+                rc = i2c_smbus_write_byte_data(client, reg, value);
+                if (rc)
+                        goto err;
+        }
+
+        efx->board_info.hwmon_client = client;
+        return 0;
+
+err:
+        i2c_unregister_device(client);
+        return rc;
+}
+
+static void efx_fini_lm87(struct efx_nic *efx)
+{
+        i2c_unregister_device(efx->board_info.hwmon_client);
+}
+
+static int efx_check_lm87(struct efx_nic *efx, unsigned mask)
+{
+        struct i2c_client *client = efx->board_info.hwmon_client;
+        s32 alarms1, alarms2;
+
+        /* If link is up then do not monitor temperature */
+        if (EFX_WORKAROUND_7884(efx) && efx->link_up)
+                return 0;
+
+        alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
+        alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
+        if (alarms1 < 0)
+                return alarms1;
+        if (alarms2 < 0)
+                return alarms2;
+        alarms1 &= mask;
+        alarms2 &= mask >> 8;
+        if (alarms1 || alarms2) {
+                EFX_ERR(efx,
+                        "LM87 detected a hardware failure (status %02x:%02x)"
+                        "%s%s\n",
+                        alarms1, alarms2,
+                        (alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "",
+                        (alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : "");
+                return -ERANGE;
+        }
+
+        return 0;
+}
+
+#else /* !CONFIG_SENSORS_LM87 */
+
+static inline int
+efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
+              const u8 *reg_values)
+{
+        return 0;
+}
+static inline void efx_fini_lm87(struct efx_nic *efx)
+{
+}
+static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask)
+{
+        return 0;
+}
+
+#endif /* CONFIG_SENSORS_LM87 */
+
+/*****************************************************************************
  * Support for the SFE4002
  *
  */
+static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */
+
+static const u8 sfe4002_lm87_regs[] = {
+        LM87_IN_LIMITS(0, 0x83, 0x91),          /* 2.5V:  1.8V +/- 5% */
+        LM87_IN_LIMITS(1, 0x51, 0x5a),          /* Vccp1: 1.2V +/- 5% */
+        LM87_IN_LIMITS(2, 0xb6, 0xca),          /* 3.3V:  3.3V +/- 5% */
+        LM87_IN_LIMITS(3, 0xb0, 0xc9),          /* 5V:    4.6-5.2V */
+        LM87_IN_LIMITS(4, 0xb0, 0xe0),          /* 12V:   11-14V */
+        LM87_IN_LIMITS(5, 0x44, 0x4b),          /* Vccp2: 1.0V +/- 5% */
+        LM87_AIN_LIMITS(0, 0xa0, 0xb2),         /* AIN1:  1.66V +/- 5% */
+        LM87_AIN_LIMITS(1, 0x91, 0xa1),         /* AIN2:  1.5V +/- 5% */
+        LM87_TEMP_INT_LIMITS(10, 60),           /* board */
+        LM87_TEMP_EXT1_LIMITS(10, 70),          /* Falcon */
+        0
+};
+
+static struct i2c_board_info sfe4002_hwmon_info = {
+        I2C_BOARD_INFO("lm87", 0x2e),
+        .platform_data  = &sfe4002_lm87_channel,
+        .irq            = -1,
+};
+
 /****************************************************************************/
 /* LED allocations. Note that on rev A0 boards the schematic and the reality
  * differ: red and green are swapped. Below is the fixed (A1) layout (there
@@ -84,11 +204,27 @@ static void sfe4002_fault_led(struct efx_nic *efx, bool state)
                         QUAKE_LED_OFF);
 }
 
+static int sfe4002_check_hw(struct efx_nic *efx)
+{
+        /* A0 board rev. 4002s report a temperature fault the whole time
+         * (bad sensor) so we mask it out. */
+        unsigned alarm_mask =
+                (efx->board_info.major == 0 && efx->board_info.minor == 0) ?
+                ~LM87_ALARM_TEMP_EXT1 : ~0;
+
+        return efx_check_lm87(efx, alarm_mask);
+}
+
 static int sfe4002_init(struct efx_nic *efx)
 {
+        int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs);
+        if (rc)
+                return rc;
+        efx->board_info.monitor = sfe4002_check_hw;
         efx->board_info.init_leds = sfe4002_init_leds;
         efx->board_info.set_fault_led = sfe4002_fault_led;
         efx->board_info.blink = board_blink;
+        efx->board_info.fini = efx_fini_lm87;
         return 0;
 }