Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 156 insertions, 0 deletions

diff --git a/drivers/net/seeq8005.h b/drivers/net/seeq8005.h
new file mode 100644
index 000000000000..809ba6dc8fb9
--- /dev/null
+++ b/drivers/net/seeq8005.h
@@ -0,0 +1,156 @@
+/* 
+ * defines, etc for the seeq8005
+ */
+ 
+/*
+ * This file is distributed under GPL.
+ *
+ * This style and layout of this file is also copied
+ * from many of the other linux network device drivers.
+ */
+
+/* The number of low I/O ports used by the ethercard. */
+#define SEEQ8005_IO_EXTENT      16
+
+#define SEEQ_B          (ioaddr)
+
+#define SEEQ_CMD        (SEEQ_B)                /* Write only */
+#define SEEQ_STATUS     (SEEQ_B)                /* Read only */
+#define SEEQ_CFG1       (SEEQ_B + 2)
+#define SEEQ_CFG2       (SEEQ_B + 4)
+#define SEEQ_REA        (SEEQ_B + 6)            /* Receive End Area Register */
+#define SEEQ_RPR        (SEEQ_B + 10)           /* Receive Pointer Register */
+#define SEEQ_TPR        (SEEQ_B + 12)           /* Transmit Pointer Register */
+#define SEEQ_DMAAR      (SEEQ_B + 14)           /* DMA Address Register */
+#define SEEQ_BUFFER     (SEEQ_B + 8)            /* Buffer Window Register */
+
+#define DEFAULT_TEA     (0x3f)
+
+#define SEEQCMD_DMA_INT_EN      (0x0001)        /* DMA Interrupt Enable */
+#define SEEQCMD_RX_INT_EN       (0x0002)        /* Receive Interrupt Enable */
+#define SEEQCMD_TX_INT_EN       (0x0004)        /* Transmit Interrupt Enable */
+#define SEEQCMD_WINDOW_INT_EN   (0x0008)        /* What the hell is this for?? */
+#define SEEQCMD_INT_MASK        (0x000f)
+
+#define SEEQCMD_DMA_INT_ACK     (0x0010)        /* DMA ack */
+#define SEEQCMD_RX_INT_ACK      (0x0020)
+#define SEEQCMD_TX_INT_ACK      (0x0040)
+#define SEEQCMD_WINDOW_INT_ACK  (0x0080)
+#define SEEQCMD_ACK_ALL         (0x00f0)
+
+#define SEEQCMD_SET_DMA_ON      (0x0100)        /* Enables DMA Request logic */
+#define SEEQCMD_SET_RX_ON       (0x0200)        /* Enables Packet RX */
+#define SEEQCMD_SET_TX_ON       (0x0400)        /* Starts TX run */
+#define SEEQCMD_SET_DMA_OFF     (0x0800)
+#define SEEQCMD_SET_RX_OFF      (0x1000)
+#define SEEQCMD_SET_TX_OFF      (0x2000)
+#define SEEQCMD_SET_ALL_OFF     (0x3800)        /* set all logic off */
+
+#define SEEQCMD_FIFO_READ       (0x4000)        /* Set FIFO to read mode (read from Buffer) */
+#define SEEQCMD_FIFO_WRITE      (0x8000)        /* Set FIFO to write mode */
+
+#define SEEQSTAT_DMA_INT_EN     (0x0001)        /* Status of interrupt enable */
+#define SEEQSTAT_RX_INT_EN      (0x0002)
+#define SEEQSTAT_TX_INT_EN      (0x0004)
+#define SEEQSTAT_WINDOW_INT_EN  (0x0008)
+
+#define SEEQSTAT_DMA_INT        (0x0010)        /* Interrupt flagged */
+#define SEEQSTAT_RX_INT         (0x0020)
+#define SEEQSTAT_TX_INT         (0x0040)
+#define SEEQSTAT_WINDOW_INT     (0x0080)
+#define SEEQSTAT_ANY_INT        (0x00f0)
+
+#define SEEQSTAT_DMA_ON         (0x0100)        /* DMA logic on */
+#define SEEQSTAT_RX_ON          (0x0200)        /* Packet RX on */
+#define SEEQSTAT_TX_ON          (0x0400)        /* TX running */
+
+#define SEEQSTAT_FIFO_FULL      (0x2000)
+#define SEEQSTAT_FIFO_EMPTY     (0x4000)
+#define SEEQSTAT_FIFO_DIR       (0x8000)        /* 1=read, 0=write */
+
+#define SEEQCFG1_BUFFER_MASK    (0x000f)        /* define what maps into the BUFFER register */
+#define SEEQCFG1_BUFFER_MAC0    (0x0000)        /* MAC station addresses 0-5 */
+#define SEEQCFG1_BUFFER_MAC1    (0x0001)
+#define SEEQCFG1_BUFFER_MAC2    (0x0002)
+#define SEEQCFG1_BUFFER_MAC3    (0x0003)
+#define SEEQCFG1_BUFFER_MAC4    (0x0004)
+#define SEEQCFG1_BUFFER_MAC5    (0x0005)
+#define SEEQCFG1_BUFFER_PROM    (0x0006)        /* The Address/CFG PROM */
+#define SEEQCFG1_BUFFER_TEA     (0x0007)        /* Transmit end area */
+#define SEEQCFG1_BUFFER_BUFFER  (0x0008)        /* Packet buffer memory */
+#define SEEQCFG1_BUFFER_INT_VEC (0x0009)        /* Interrupt Vector */
+
+#define SEEQCFG1_DMA_INTVL_MASK (0x0030)
+#define SEEQCFG1_DMA_CONT       (0x0000)
+#define SEEQCFG1_DMA_800ns      (0x0010)
+#define SEEQCFG1_DMA_1600ns     (0x0020)
+#define SEEQCFG1_DMA_3200ns     (0x0030)
+
+#define SEEQCFG1_DMA_LEN_MASK   (0x00c0)
+#define SEEQCFG1_DMA_LEN1       (0x0000)
+#define SEEQCFG1_DMA_LEN2       (0x0040)
+#define SEEQCFG1_DMA_LEN4       (0x0080)
+#define SEEQCFG1_DMA_LEN8       (0x00c0)
+
+#define SEEQCFG1_MAC_MASK       (0x3f00)        /* Dis/enable bits for MAC addresses */
+#define SEEQCFG1_MAC0_EN        (0x0100)
+#define SEEQCFG1_MAC1_EN        (0x0200)
+#define SEEQCFG1_MAC2_EN        (0x0400)
+#define SEEQCFG1_MAC3_EN        (0x0800)
+#define SEEQCFG1_MAC4_EN        (0x1000)
+#define SEEQCFG1_MAC5_EN        (0x2000)
+
+#define SEEQCFG1_MATCH_MASK     (0xc000)        /* Packet matching logic cfg bits */
+#define SEEQCFG1_MATCH_SPECIFIC (0x0000)        /* only matching MAC addresses */
+#define SEEQCFG1_MATCH_BROAD    (0x4000)        /* matching and broadcast addresses */
+#define SEEQCFG1_MATCH_MULTI    (0x8000)        /* matching, broadcast and multicast */
+#define SEEQCFG1_MATCH_ALL      (0xc000)        /* Promiscuous mode */
+
+#define SEEQCFG1_DEFAULT        (SEEQCFG1_BUFFER_BUFFER | SEEQCFG1_MAC0_EN | SEEQCFG1_MATCH_BROAD)
+
+#define SEEQCFG2_BYTE_SWAP      (0x0001)        /* 0=Intel byte-order */
+#define SEEQCFG2_AUTO_REA       (0x0002)        /* if set, Receive End Area will be updated when reading from Buffer */
+
+#define SEEQCFG2_CRC_ERR_EN     (0x0008)        /* enables receiving of packets with CRC errors */
+#define SEEQCFG2_DRIBBLE_EN     (0x0010)        /* enables receiving of non-aligned packets */
+#define SEEQCFG2_SHORT_EN       (0x0020)        /* enables receiving of short packets */
+
+#define SEEQCFG2_SLOTSEL        (0x0040)        /* 0= standard IEEE802.3, 1= smaller,faster, non-standard */
+#define SEEQCFG2_NO_PREAM       (0x0080)        /* 1= user supplies Xmit preamble bytes */
+#define SEEQCFG2_ADDR_LEN       (0x0100)        /* 1= 2byte addresses */
+#define SEEQCFG2_REC_CRC        (0x0200)        /* 0= received packets will have CRC stripped from them */
+#define SEEQCFG2_XMIT_NO_CRC    (0x0400)        /* don't xmit CRC with each packet (user supplies it) */
+#define SEEQCFG2_LOOPBACK       (0x0800)
+#define SEEQCFG2_CTRLO          (0x1000)
+#define SEEQCFG2_RESET          (0x8000)        /* software Hard-reset bit */
+
+struct seeq_pkt_hdr {
+        unsigned short  next;                   /* address of next packet header */
+        unsigned char   babble_int:1,           /* enable int on >1514 byte packet */
+                        coll_int:1,             /* enable int on collision */
+                        coll_16_int:1,          /* enable int on >15 collision */
+                        xmit_int:1,             /* enable int on success (or xmit with <15 collision) */
+                        unused:1,
+                        data_follows:1,         /* if not set, process this as a header and pointer only */
+                        chain_cont:1,           /* if set, more headers in chain                only cmd bit valid in recv header */
+                        xmit_recv:1;            /* if set, a xmit packet, else a receive packet.*/
+        unsigned char   status;
+};
+
+#define SEEQPKTH_BAB_INT_EN     (0x01)          /* xmit only */
+#define SEEQPKTH_COL_INT_EN     (0x02)          /* xmit only */
+#define SEEQPKTH_COL16_INT_EN   (0x04)          /* xmit only */
+#define SEEQPKTH_XMIT_INT_EN    (0x08)          /* xmit only */
+#define SEEQPKTH_DATA_FOLLOWS   (0x20)          /* supposedly in xmit only */
+#define SEEQPKTH_CHAIN          (0x40)          /* more headers follow */
+#define SEEQPKTH_XMIT           (0x80)
+
+#define SEEQPKTS_BABBLE         (0x0100)        /* xmit only */
+#define SEEQPKTS_OVERSIZE       (0x0100)        /* recv only */
+#define SEEQPKTS_COLLISION      (0x0200)        /* xmit only */
+#define SEEQPKTS_CRC_ERR        (0x0200)        /* recv only */
+#define SEEQPKTS_COLL16         (0x0400)        /* xmit only */
+#define SEEQPKTS_DRIB           (0x0400)        /* recv only */
+#define SEEQPKTS_SHORT          (0x0800)        /* recv only */
+#define SEEQPKTS_DONE           (0x8000)
+#define SEEQPKTS_ANY_ERROR      (0x0f00)