S2io: Removed receive buffer replenishment tasklet

- Removed receive buffer replenishment tasklet s2io_tasklet and instead
  allocating the receive buffers in either the interrupt handler (no napi)
  or the napi handler (napi enabled).

Signed-off-by: Surjit Reang <surjit.reang@neterion.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 4 insertions, 89 deletions

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 81fd7abc27e4..4344e6ed9041 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -117,20 +117,6 @@ static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
 
 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
                                       ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
-#define TASKLET_IN_USE test_and_set_bit(0, (&sp->tasklet_status))
-#define PANIC   1
-#define LOW     2
-static inline int rx_buffer_level(struct s2io_nic * sp, int rxb_size, int ring)
-{
-        struct mac_info *mac_control;
-
-        mac_control = &sp->mac_control;
-        if (rxb_size <= rxd_count[sp->rxd_mode])
-                return PANIC;
-        else if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16)
-                return  LOW;
-        return 0;
-}
 
 static inline int is_s2io_card_up(const struct s2io_nic * sp)
 {
@@ -4105,7 +4091,6 @@ static int s2io_close(struct net_device *dev)
                         do_s2io_delete_unicast_mc(sp, tmp64);
         }
 
-        /* Reset card, kill tasklet and free Tx and Rx buffers. */
         s2io_card_down(sp);
 
         return 0;
@@ -4370,29 +4355,9 @@ s2io_alarm_handle(unsigned long data)
 
 static int s2io_chk_rx_buffers(struct s2io_nic *sp, int rng_n)
 {
-        int rxb_size, level;
-
-        if (!sp->lro) {
-                rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]);
-                level = rx_buffer_level(sp, rxb_size, rng_n);
-
-                if ((level == PANIC) && (!TASKLET_IN_USE)) {
-                        int ret;
-                        DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__);
-                        DBG_PRINT(INTR_DBG, "PANIC levels\n");
-                        if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) {
-                                DBG_PRINT(INFO_DBG, "Out of memory in %s",
-                                          __FUNCTION__);
-                                clear_bit(0, (&sp->tasklet_status));
-                                return -1;
-                        }
-                        clear_bit(0, (&sp->tasklet_status));
-                } else if (level == LOW)
-                        tasklet_schedule(&sp->task);
-
-        } else if (fill_rx_buffers(sp, rng_n) == -ENOMEM) {
-                        DBG_PRINT(INFO_DBG, "%s:Out of memory", sp->dev->name);
-                        DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
+        if (fill_rx_buffers(sp, rng_n) == -ENOMEM) {
+                DBG_PRINT(INFO_DBG, "%s:Out of memory", sp->dev->name);
+                DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
         }
         return 0;
 }
@@ -6770,49 +6735,6 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
 }
 
 /**
- *  s2io_tasklet - Bottom half of the ISR.
- *  @dev_adr : address of the device structure in dma_addr_t format.
- *  Description:
- *  This is the tasklet or the bottom half of the ISR. This is
- *  an extension of the ISR which is scheduled by the scheduler to be run
- *  when the load on the CPU is low. All low priority tasks of the ISR can
- *  be pushed into the tasklet. For now the tasklet is used only to
- *  replenish the Rx buffers in the Rx buffer descriptors.
- *  Return value:
- *  void.
- */
-
-static void s2io_tasklet(unsigned long dev_addr)
-{
-        struct net_device *dev = (struct net_device *) dev_addr;
-        struct s2io_nic *sp = dev->priv;
-        int i, ret;
-        struct mac_info *mac_control;
-        struct config_param *config;
-
-        mac_control = &sp->mac_control;
-        config = &sp->config;
-
-        if (!TASKLET_IN_USE) {
-                for (i = 0; i < config->rx_ring_num; i++) {
-                        ret = fill_rx_buffers(sp, i);
-                        if (ret == -ENOMEM) {
-                                DBG_PRINT(INFO_DBG, "%s: Out of ",
-                                          dev->name);
-                                DBG_PRINT(INFO_DBG, "memory in tasklet\n");
-                                break;
-                        } else if (ret == -EFILL) {
-                                DBG_PRINT(INFO_DBG,
-                                          "%s: Rx Ring %d is full\n",
-                                          dev->name, i);
-                                break;
-                        }
-                }
-                clear_bit(0, (&sp->tasklet_status));
-        }
-}
-
-/**
  * s2io_set_link - Set the LInk status
  * @data: long pointer to device private structue
  * Description: Sets the link status for the adapter
@@ -7186,9 +7108,6 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
 
         s2io_rem_isr(sp);
 
-        /* Kill tasklet. */
-        tasklet_kill(&sp->task);
-
         /* Check if the device is Quiescent and then Reset the NIC */
         while(do_io) {
                 /* As per the HW requirement we need to replenish the
@@ -7314,9 +7233,6 @@ static int s2io_card_up(struct s2io_nic * sp)
 
         S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
 
-        /* Enable tasklet for the device */
-        tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
-
         /*  Enable select interrupts */
         en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
         if (sp->config.intr_type != INTA)
@@ -8119,10 +8035,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
         s2io_reset(sp);
 
         /*
-         * Initialize the tasklet status and link state flags
+         * Initialize link state flags
          * and the card state parameter
          */
-        sp->tasklet_status = 0;
         sp->state = 0;
 
         /* Initialize spinlocks */