r6040: implement phylib

This patch adds support for using phylib and adds the required mdiobus driver
stubs. This allows for less code to be present in the driver and removes
the PHY status specific timer which is now handled by phylib directly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 144 insertions, 154 deletions

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 9a251acf5ab8..6878511afc4e 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -44,6 +44,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/uaccess.h>
+#include <linux/phy.h>
 
 #include <asm/processor.h>
 
@@ -179,7 +180,6 @@ struct r6040_descriptor {
 
 struct r6040_private {
         spinlock_t lock;                /* driver lock */
-        struct timer_list timer;
         struct pci_dev *pdev;
         struct r6040_descriptor *rx_insert_ptr;
         struct r6040_descriptor *rx_remove_ptr;
@@ -189,13 +189,15 @@ struct r6040_private {
         struct r6040_descriptor *tx_ring;
         dma_addr_t rx_ring_dma;
         dma_addr_t tx_ring_dma;
-        u16     tx_free_desc, phy_addr, phy_mode;
+        u16     tx_free_desc, phy_addr;
         u16     mcr0, mcr1;
-        u16     switch_sig;
         struct net_device *dev;
-        struct mii_if_info mii_if;
+        struct mii_bus *mii_bus;
         struct napi_struct napi;
         void __iomem *base;
+        struct phy_device *phydev;
+        int old_link;
+        int old_duplex;
 };
 
 static char version[] __devinitdata = KERN_INFO DRV_NAME
@@ -238,20 +240,30 @@ static void r6040_phy_write(void __iomem *ioaddr, int phy_addr, int reg, u16 val
         }
 }
 
-static int r6040_mdio_read(struct net_device *dev, int mii_id, int reg)
+static int r6040_mdiobus_read(struct mii_bus *bus, int phy_addr, int reg)
 {
+        struct net_device *dev = bus->priv;
         struct r6040_private *lp = netdev_priv(dev);
         void __iomem *ioaddr = lp->base;
 
-        return (r6040_phy_read(ioaddr, lp->phy_addr, reg));
+        return r6040_phy_read(ioaddr, phy_addr, reg);
 }
 
-static void r6040_mdio_write(struct net_device *dev, int mii_id, int reg, int val)
+static int r6040_mdiobus_write(struct mii_bus *bus, int phy_addr,
+                                                int reg, u16 value)
 {
+        struct net_device *dev = bus->priv;
         struct r6040_private *lp = netdev_priv(dev);
         void __iomem *ioaddr = lp->base;
 
-        r6040_phy_write(ioaddr, lp->phy_addr, reg, val);
+        r6040_phy_write(ioaddr, phy_addr, reg, value);
+
+        return 0;
+}
+
+static int r6040_mdiobus_reset(struct mii_bus *bus)
+{
+        return 0;
 }
 
 static void r6040_free_txbufs(struct net_device *dev)
@@ -408,10 +420,9 @@ static void r6040_tx_timeout(struct net_device *dev)
         void __iomem *ioaddr = priv->base;
 
         netdev_warn(dev, "transmit timed out, int enable %4.4x "
-                "status %4.4x, PHY status %4.4x\n",
+                "status %4.4x\n",
                 ioread16(ioaddr + MIER),
-                ioread16(ioaddr + MISR),
-                r6040_mdio_read(dev, priv->mii_if.phy_id, MII_BMSR));
+                ioread16(ioaddr + MISR));
 
         dev->stats.tx_errors++;
 
@@ -463,9 +474,6 @@ static int r6040_close(struct net_device *dev)
         struct r6040_private *lp = netdev_priv(dev);
         struct pci_dev *pdev = lp->pdev;
 
-        /* deleted timer */
-        del_timer_sync(&lp->timer);
-
         spin_lock_irq(&lp->lock);
         napi_disable(&lp->napi);
         netif_stop_queue(dev);
@@ -495,64 +503,14 @@ static int r6040_close(struct net_device *dev)
         return 0;
 }
 
-/* Status of PHY CHIP */
-static int r6040_phy_mode_chk(struct net_device *dev)
-{
-        struct r6040_private *lp = netdev_priv(dev);
-        void __iomem *ioaddr = lp->base;
-        int phy_dat;
-
-        /* PHY Link Status Check */
-        phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 1);
-        if (!(phy_dat & 0x4))
-                phy_dat = 0x8000;       /* Link Failed, full duplex */
-
-        /* PHY Chip Auto-Negotiation Status */
-        phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 1);
-        if (phy_dat & 0x0020) {
-                /* Auto Negotiation Mode */
-                phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 5);
-                phy_dat &= r6040_phy_read(ioaddr, lp->phy_addr, 4);
-                if (phy_dat & 0x140)
-                        /* Force full duplex */
-                        phy_dat = 0x8000;
-                else
-                        phy_dat = 0;
-        } else {
-                /* Force Mode */
-                phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 0);
-                if (phy_dat & 0x100)
-                        phy_dat = 0x8000;
-                else
-                        phy_dat = 0x0000;
-        }
-
-        return phy_dat;
-};
-
-static void r6040_set_carrier(struct mii_if_info *mii)
-{
-        if (r6040_phy_mode_chk(mii->dev)) {
-                /* autoneg is off: Link is always assumed to be up */
-                if (!netif_carrier_ok(mii->dev))
-                        netif_carrier_on(mii->dev);
-        } else
-                r6040_phy_mode_chk(mii->dev);
-}
-
 static int r6040_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
         struct r6040_private *lp = netdev_priv(dev);
-        struct mii_ioctl_data *data = if_mii(rq);
-        int rc;
 
-        if (!netif_running(dev))
+        if (!lp->phydev)
                 return -EINVAL;
-        spin_lock_irq(&lp->lock);
-        rc = generic_mii_ioctl(&lp->mii_if, data, cmd, NULL);
-        spin_unlock_irq(&lp->lock);
-        r6040_set_carrier(&lp->mii_if);
-        return rc;
+
+        return phy_mii_ioctl(lp->phydev, if_mii(rq), cmd);
 }
 
 static int r6040_rx(struct net_device *dev, int limit)
@@ -751,26 +709,6 @@ static int r6040_up(struct net_device *dev)
         if (ret)
                 return ret;
 
-        /* Read the PHY ID */
-        lp->switch_sig = r6040_phy_read(ioaddr, 0, 2);
-
-        if (lp->switch_sig  == ICPLUS_PHY_ID) {
-                r6040_phy_write(ioaddr, 29, 31, 0x175C); /* Enable registers */
-                lp->phy_mode = 0x8000;
-        } else {
-                /* PHY Mode Check */
-                r6040_phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
-                r6040_phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
-
-                if (PHY_MODE == 0x3100)
-                        lp->phy_mode = r6040_phy_mode_chk(dev);
-                else
-                        lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
-        }
-
-        /* Set duplex mode */
-        lp->mcr0 |= lp->phy_mode;
-
         /* improve performance (by RDC guys) */
         r6040_phy_write(ioaddr, 30, 17, (r6040_phy_read(ioaddr, 30, 17) | 0x4000));
         r6040_phy_write(ioaddr, 30, 17, ~((~r6040_phy_read(ioaddr, 30, 17)) | 0x2000));
@@ -783,35 +721,6 @@ static int r6040_up(struct net_device *dev)
         return 0;
 }
 
-/*
-  A periodic timer routine
-        Polling PHY Chip Link Status
-*/
-static void r6040_timer(unsigned long data)
-{
-        struct net_device *dev = (struct net_device *)data;
-        struct r6040_private *lp = netdev_priv(dev);
-        void __iomem *ioaddr = lp->base;
-        u16 phy_mode;
-
-        /* Polling PHY Chip Status */
-        if (PHY_MODE == 0x3100)
-                phy_mode = r6040_phy_mode_chk(dev);
-        else
-                phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
-
-        if (phy_mode != lp->phy_mode) {
-                lp->phy_mode = phy_mode;
-                lp->mcr0 = (lp->mcr0 & 0x7fff) | phy_mode;
-                iowrite16(lp->mcr0, ioaddr);
-        }
-
-        /* Timer active again */
-        mod_timer(&lp->timer, round_jiffies(jiffies + HZ));
-
-        /* Check media */
-        mii_check_media(&lp->mii_if, 1, 1);
-}
 
 /* Read/set MAC address routines */
 static void r6040_mac_address(struct net_device *dev)
@@ -873,10 +782,6 @@ static int r6040_open(struct net_device *dev)
         napi_enable(&lp->napi);
         netif_start_queue(dev);
 
-        /* set and active a timer process */
-        setup_timer(&lp->timer, r6040_timer, (unsigned long) dev);
-        if (lp->switch_sig != ICPLUS_PHY_ID)
-                mod_timer(&lp->timer, jiffies + HZ);
         return 0;
 }
 
@@ -1015,40 +920,22 @@ static void netdev_get_drvinfo(struct net_device *dev,
 static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
         struct r6040_private *rp = netdev_priv(dev);
-        int rc;
-
-        spin_lock_irq(&rp->lock);
-        rc = mii_ethtool_gset(&rp->mii_if, cmd);
-        spin_unlock_irq(&rp->lock);
 
-        return rc;
+        return  phy_ethtool_gset(rp->phydev, cmd);
 }
 
 static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
         struct r6040_private *rp = netdev_priv(dev);
-        int rc;
-
-        spin_lock_irq(&rp->lock);
-        rc = mii_ethtool_sset(&rp->mii_if, cmd);
-        spin_unlock_irq(&rp->lock);
-        r6040_set_carrier(&rp->mii_if);
-
-        return rc;
-}
-
-static u32 netdev_get_link(struct net_device *dev)
-{
-        struct r6040_private *rp = netdev_priv(dev);
 
-        return mii_link_ok(&rp->mii_if);
+        return phy_ethtool_sset(rp->phydev, cmd);
 }
 
 static const struct ethtool_ops netdev_ethtool_ops = {
         .get_drvinfo            = netdev_get_drvinfo,
         .get_settings           = netdev_get_settings,
         .set_settings           = netdev_set_settings,
-        .get_link               = netdev_get_link,
+        .get_link               = ethtool_op_get_link,
 };
 
 static const struct net_device_ops r6040_netdev_ops = {
@@ -1067,6 +954,79 @@ static const struct net_device_ops r6040_netdev_ops = {
 #endif
 };
 
+static void r6040_adjust_link(struct net_device *dev)
+{
+        struct r6040_private *lp = netdev_priv(dev);
+        struct phy_device *phydev = lp->phydev;
+        int status_changed = 0;
+        void __iomem *ioaddr = lp->base;
+
+        BUG_ON(!phydev);
+
+        if (lp->old_link != phydev->link) {
+                status_changed = 1;
+                lp->old_link = phydev->link;
+        }
+
+        /* reflect duplex change */
+        if (phydev->link && (lp->old_duplex != phydev->duplex)) {
+                lp->mcr0 |= (phydev->duplex == DUPLEX_FULL ? 0x8000 : 0);
+                iowrite16(lp->mcr0, ioaddr);
+
+                status_changed = 1;
+                lp->old_duplex = phydev->duplex;
+        }
+
+        if (status_changed) {
+                pr_info("%s: link %s", dev->name, phydev->link ?
+                        "UP" : "DOWN");
+                if (phydev->link)
+                        pr_cont(" - %d/%s", phydev->speed,
+                        DUPLEX_FULL == phydev->duplex ? "full" : "half");
+                pr_cont("\n");
+        }
+}
+
+static int r6040_mii_probe(struct net_device *dev)
+{
+        struct r6040_private *lp = netdev_priv(dev);
+        struct phy_device *phydev = NULL;
+
+        phydev = phy_find_first(lp->mii_bus);
+        if (!phydev) {
+                dev_err(&lp->pdev->dev, "no PHY found\n");
+                return -ENODEV;
+        }
+
+        phydev = phy_connect(dev, dev_name(&phydev->dev), &r6040_adjust_link,
+                                0, PHY_INTERFACE_MODE_MII);
+
+        if (IS_ERR(phydev)) {
+                dev_err(&lp->pdev->dev, "could not attach to PHY\n");
+                return PTR_ERR(phydev);
+        }
+
+        /* mask with MAC supported features */
+        phydev->supported &= (SUPPORTED_10baseT_Half
+                                | SUPPORTED_10baseT_Full
+                                | SUPPORTED_100baseT_Half
+                                | SUPPORTED_100baseT_Full
+                                | SUPPORTED_Autoneg
+                                | SUPPORTED_MII
+                                | SUPPORTED_TP);
+
+        phydev->advertising = phydev->supported;
+        lp->phydev = phydev;
+        lp->old_link = 0;
+        lp->old_duplex = -1;
+
+        dev_info(&lp->pdev->dev, "attached PHY driver [%s] "
+                "(mii_bus:phy_addr=%s)\n",
+                phydev->drv->name, dev_name(&phydev->dev));
+
+        return 0;
+}
+
 static int __devinit r6040_init_one(struct pci_dev *pdev,
                                          const struct pci_device_id *ent)
 {
@@ -1077,6 +1037,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
         static int card_idx = -1;
         int bar = 0;
         u16 *adrp;
+        int i;
 
         printk("%s\n", version);
 
@@ -1163,7 +1124,6 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
         /* Init RDC private data */
         lp->mcr0 = 0x1002;
         lp->phy_addr = phy_table[card_idx];
-        lp->switch_sig = 0;
 
         /* The RDC-specific entries in the device structure. */
         dev->netdev_ops = &r6040_netdev_ops;
@@ -1171,28 +1131,54 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
         dev->watchdog_timeo = TX_TIMEOUT;
 
         netif_napi_add(dev, &lp->napi, r6040_poll, 64);
-        lp->mii_if.dev = dev;
-        lp->mii_if.mdio_read = r6040_mdio_read;
-        lp->mii_if.mdio_write = r6040_mdio_write;
-        lp->mii_if.phy_id = lp->phy_addr;
-        lp->mii_if.phy_id_mask = 0x1f;
-        lp->mii_if.reg_num_mask = 0x1f;
-
-        /* Check the vendor ID on the PHY, if 0xffff assume none attached */
-        if (r6040_phy_read(ioaddr, lp->phy_addr, 2) == 0xffff) {
-                dev_err(&pdev->dev, "Failed to detect an attached PHY\n");
-                err = -ENODEV;
+
+        lp->mii_bus = mdiobus_alloc();
+        if (!lp->mii_bus) {
+                dev_err(&pdev->dev, "mdiobus_alloc() failed\n");
                 goto err_out_unmap;
         }
 
+        lp->mii_bus->priv = dev;
+        lp->mii_bus->read = r6040_mdiobus_read;
+        lp->mii_bus->write = r6040_mdiobus_write;
+        lp->mii_bus->reset = r6040_mdiobus_reset;
+        lp->mii_bus->name = "r6040_eth_mii";
+        snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "%x", card_idx);
+        lp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+        if (!lp->mii_bus->irq) {
+                dev_err(&pdev->dev, "mii_bus irq allocation failed\n");
+                goto err_out_mdio;
+        }
+
+        for (i = 0; i < PHY_MAX_ADDR; i++)
+                lp->mii_bus->irq[i] = PHY_POLL;
+
+        err = mdiobus_register(lp->mii_bus);
+        if (err) {
+                dev_err(&pdev->dev, "failed to register MII bus\n");
+                goto err_out_mdio_irq;
+        }
+
+        err = r6040_mii_probe(dev);
+        if (err) {
+                dev_err(&pdev->dev, "failed to probe MII bus\n");
+                goto err_out_mdio_unregister;
+        }
+
         /* Register net device. After this dev->name assign */
         err = register_netdev(dev);
         if (err) {
                 dev_err(&pdev->dev, "Failed to register net device\n");
-                goto err_out_unmap;
+                goto err_out_mdio_unregister;
         }
         return 0;
 
+err_out_mdio_unregister:
+        mdiobus_unregister(lp->mii_bus);
+err_out_mdio_irq:
+        kfree(lp->mii_bus->irq);
+err_out_mdio:
+        mdiobus_free(lp->mii_bus);
 err_out_unmap:
         pci_iounmap(pdev, ioaddr);
 err_out_free_res:
@@ -1206,8 +1192,12 @@ err_out:
 static void __devexit r6040_remove_one(struct pci_dev *pdev)
 {
         struct net_device *dev = pci_get_drvdata(pdev);
+        struct r6040_private *lp = netdev_priv(dev);
 
         unregister_netdev(dev);
+        mdiobus_unregister(lp->mii_bus);
+        kfree(lp->mii_bus->irq);
+        mdiobus_free(lp->mii_bus);
         pci_release_regions(pdev);
         free_netdev(dev);
         pci_disable_device(pdev);