qlge: Add support for varied pcie function numbers.

Currently we support only PCIe NIC functions zero and one, and FCoE
functions as 3 and 4. Future configurations can mix these up in any
fashion.
This patch removes the 0-1 dependancy and allows usage of any of the 4
functions. We also find the alternate NIC function (if exist) and
determine our port number based on the comparison of the two functions:
Lower function number gets first port, higher function gets second port.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 54 insertions, 6 deletions

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index d6517eb5bc1d..5055f5b37a73 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -680,7 +680,7 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
         /* Get flash offset for function and adjust
          * for dword access.
          */
-        if (!qdev->func)
+        if (!qdev->port)
                 offset = FUNC0_FLASH_OFFSET / sizeof(u32);
         else
                 offset = FUNC1_FLASH_OFFSET / sizeof(u32);
@@ -744,7 +744,7 @@ static int ql_get_8012_flash_params(struct ql_adapter *qdev)
         /* Second function's parameters follow the first
          * function's.
          */
-        if (qdev->func)
+        if (qdev->port)
                 offset = size;
 
         if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
@@ -3220,9 +3220,10 @@ static void ql_display_dev_info(struct net_device *ndev)
         struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
 
         QPRINTK(qdev, PROBE, INFO,
-                "Function #%d, NIC Roll %d, NIC Rev = %d, "
+                "Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
                 "XG Roll = %d, XG Rev = %d.\n",
                 qdev->func,
+                qdev->port,
                 qdev->chip_rev_id & 0x0000000f,
                 qdev->chip_rev_id >> 4 & 0x0000000f,
                 qdev->chip_rev_id >> 8 & 0x0000000f,
@@ -3677,12 +3678,53 @@ static struct nic_operations qla8000_nic_ops = {
         .port_initialize        = ql_8000_port_initialize,
 };
 
+/* Find the pcie function number for the other NIC
+ * on this chip.  Since both NIC functions share a
+ * common firmware we have the lowest enabled function
+ * do any common work.  Examples would be resetting
+ * after a fatal firmware error, or doing a firmware
+ * coredump.
+ */
+static int ql_get_alt_pcie_func(struct ql_adapter *qdev)
+{
+        int status = 0;
+        u32 temp;
+        u32 nic_func1, nic_func2;
+
+        status = ql_read_mpi_reg(qdev, MPI_TEST_FUNC_PORT_CFG,
+                        &temp);
+        if (status)
+                return status;
+
+        nic_func1 = ((temp >> MPI_TEST_NIC1_FUNC_SHIFT) &
+                        MPI_TEST_NIC_FUNC_MASK);
+        nic_func2 = ((temp >> MPI_TEST_NIC2_FUNC_SHIFT) &
+                        MPI_TEST_NIC_FUNC_MASK);
+
+        if (qdev->func == nic_func1)
+                qdev->alt_func = nic_func2;
+        else if (qdev->func == nic_func2)
+                qdev->alt_func = nic_func1;
+        else
+                status = -EIO;
+
+        return status;
+}
 
-static void ql_get_board_info(struct ql_adapter *qdev)
+static int ql_get_board_info(struct ql_adapter *qdev)
 {
+        int status;
         qdev->func =
             (ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT;
-        if (qdev->func) {
+        if (qdev->func > 3)
+                return -EIO;
+
+        status = ql_get_alt_pcie_func(qdev);
+        if (status)
+                return status;
+
+        qdev->port = (qdev->func < qdev->alt_func) ? 0 : 1;
+        if (qdev->port) {
                 qdev->xg_sem_mask = SEM_XGMAC1_MASK;
                 qdev->port_link_up = STS_PL1;
                 qdev->port_init = STS_PI1;
@@ -3701,6 +3743,7 @@ static void ql_get_board_info(struct ql_adapter *qdev)
                 qdev->nic_ops = &qla8012_nic_ops;
         else if (qdev->device_id == QLGE_DEVICE_ID_8000)
                 qdev->nic_ops = &qla8000_nic_ops;
+        return status;
 }
 
 static void ql_release_all(struct pci_dev *pdev)
@@ -3795,7 +3838,12 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 
         qdev->ndev = ndev;
         qdev->pdev = pdev;
-        ql_get_board_info(qdev);
+        err = ql_get_board_info(qdev);
+        if (err) {
+                dev_err(&pdev->dev, "Register access failed.\n");
+                err = -EIO;
+                goto err_out;
+        }
         qdev->msg_enable = netif_msg_init(debug, default_msg);
         spin_lock_init(&qdev->hw_lock);
         spin_lock_init(&qdev->stats_lock);