qlge: Prepare to add new device.

This organizes a few calls into a function table to enable adding new
devices.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 64 insertions, 16 deletions

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index b144b6becfea..d1d8f05d5a11 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -75,7 +75,7 @@ module_param(irq_type, int, MSIX_IRQ);
 MODULE_PARM_DESC(irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
 
 static struct pci_device_id qlge_pci_tbl[] __devinitdata = {
-        {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID)},
+        {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8012)},
         /* required last entry */
         {0,}
 };
@@ -623,6 +623,28 @@ static void ql_enable_all_completion_interrupts(struct ql_adapter *qdev)
 
 }
 
+static int ql_validate_flash(struct ql_adapter *qdev, u32 size, const char *str)
+{
+        int status, i;
+        u16 csum = 0;
+        __le16 *flash = (__le16 *)&qdev->flash;
+
+        status = strncmp((char *)&qdev->flash, str, 4);
+        if (status) {
+                QPRINTK(qdev, IFUP, ERR, "Invalid flash signature.\n");
+                return  status;
+        }
+
+        for (i = 0; i < size; i++)
+                csum += le16_to_cpu(*flash++);
+
+        if (csum)
+                QPRINTK(qdev, IFUP, ERR,
+                        "Invalid flash checksum, csum = 0x%.04x.\n", csum);
+
+        return csum;
+}
+
 static int ql_read_flash_word(struct ql_adapter *qdev, int offset, __le32 *data)
 {
         int status = 0;
@@ -647,23 +669,24 @@ exit:
         return status;
 }
 
-static int ql_get_flash_params(struct ql_adapter *qdev)
+static int ql_get_8012_flash_params(struct ql_adapter *qdev)
 {
         int i;
         int status;
         __le32 *p = (__le32 *)&qdev->flash;
         u32 offset = 0;
+        u32 size = sizeof(struct flash_params_8012) / sizeof(u32);
 
         /* Second function's parameters follow the first
          * function's.
          */
         if (qdev->func)
-                offset = sizeof(qdev->flash) / sizeof(u32);
+                offset = size;
 
         if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
                 return -ETIMEDOUT;
 
-        for (i = 0; i < sizeof(qdev->flash) / sizeof(u32); i++, p++) {
+        for (i = 0; i < size; i++, p++) {
                 status = ql_read_flash_word(qdev, i+offset, p);
                 if (status) {
                         QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n");
@@ -671,6 +694,25 @@ static int ql_get_flash_params(struct ql_adapter *qdev)
                 }
 
         }
+
+        status = ql_validate_flash(qdev,
+                        sizeof(struct flash_params_8012) / sizeof(u16),
+                        "8012");
+        if (status) {
+                QPRINTK(qdev, IFUP, ERR, "Invalid flash.\n");
+                status = -EINVAL;
+                goto exit;
+        }
+
+        if (!is_valid_ether_addr(qdev->flash.flash_params_8012.mac_addr)) {
+                status = -EINVAL;
+                goto exit;
+        }
+
+        memcpy(qdev->ndev->dev_addr,
+                qdev->flash.flash_params_8012.mac_addr,
+                qdev->ndev->addr_len);
+
 exit:
         ql_sem_unlock(qdev, SEM_FLASH_MASK);
         return status;
@@ -747,7 +789,7 @@ exit:
  * This functionality may be done in the MPI firmware at a
  * later date.
  */
-static int ql_port_initialize(struct ql_adapter *qdev)
+static int ql_8012_port_initialize(struct ql_adapter *qdev)
 {
         int status = 0;
         u32 data;
@@ -2994,11 +3036,12 @@ static int ql_adapter_initialize(struct ql_adapter *qdev)
                 }
         }
 
-        status = ql_port_initialize(qdev);
-        if (status) {
-                QPRINTK(qdev, IFUP, ERR, "Failed to start port.\n");
-                return status;
-        }
+        /* Initialize the port and set the max framesize. */
+        status = qdev->nic_ops->port_initialize(qdev);
+       if (status) {
+              QPRINTK(qdev, IFUP, ERR, "Failed to start port.\n");
+              return status;
+       }
 
         /* Set up the MAC address and frame routing filter. */
         status = ql_cam_route_initialize(qdev);
@@ -3509,6 +3552,12 @@ static void ql_asic_reset_work(struct work_struct *work)
         ql_cycle_adapter(qdev);
 }
 
+static struct nic_operations qla8012_nic_ops = {
+        .get_flash              = ql_get_8012_flash_params,
+        .port_initialize        = ql_8012_port_initialize,
+};
+
+
 static void ql_get_board_info(struct ql_adapter *qdev)
 {
         qdev->func =
@@ -3527,6 +3576,9 @@ static void ql_get_board_info(struct ql_adapter *qdev)
                 qdev->mailbox_out = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC0_MBO;
         }
         qdev->chip_rev_id = ql_read32(qdev, REV_ID);
+        qdev->device_id = qdev->pdev->device;
+        if (qdev->device_id == QLGE_DEVICE_ID_8012)
+                qdev->nic_ops = &qla8012_nic_ops;
 }
 
 static void ql_release_all(struct pci_dev *pdev)
@@ -3619,24 +3671,20 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
                 goto err_out;
         }
 
-        ql_get_board_info(qdev);
         qdev->ndev = ndev;
         qdev->pdev = pdev;
+        ql_get_board_info(qdev);
         qdev->msg_enable = netif_msg_init(debug, default_msg);
         spin_lock_init(&qdev->hw_lock);
         spin_lock_init(&qdev->stats_lock);
 
         /* make sure the EEPROM is good */
-        err = ql_get_flash_params(qdev);
+        err = qdev->nic_ops->get_flash(qdev);
         if (err) {
                 dev_err(&pdev->dev, "Invalid FLASH.\n");
                 goto err_out;
         }
 
-        if (!is_valid_ether_addr(qdev->flash.mac_addr))
-                goto err_out;
-
-        memcpy(ndev->dev_addr, qdev->flash.mac_addr, ndev->addr_len);
         memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
 
         /* Set up the default ring sizes. */