Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:

	drivers/net/hp-plus.c
	drivers/net/wireless/ath5k/base.c
	drivers/net/wireless/ath9k/recv.c
	net/wireless/reg.c

2 files changed, 66 insertions, 11 deletions

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index b344a0b55dbf..29546a206045 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -227,8 +227,17 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
         if (r)
                 return ERR_PTR(r);
 
-        /* If the phy_id is all Fs or all 0s, there is no device there */
-        if ((0xffff == phy_id) || (0x00 == phy_id))
+        /* If the phy_id is mostly Fs, there is no device there */
+        if ((phy_id & 0x1fffffff) == 0x1fffffff)
+                return NULL;
+
+        /*
+         * Broken hardware is sometimes missing the pull down resistor on the
+         * MDIO line, which results in reads to non-existent devices returning
+         * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
+         * device as well.
+         */
+        if (phy_id == 0)
                 return NULL;
 
         dev = phy_device_create(bus, addr, phy_id);
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 8874497b6bbf..dd3b2447e85a 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -34,6 +34,8 @@
 #define MII_VSC8244_IMASK_DUPLEX        0x1000
 #define MII_VSC8244_IMASK_MASK          0xf000
 
+#define MII_VSC8221_IMASK_MASK          0xa000
+
 /* Vitesse Interrupt Status Register */
 #define MII_VSC8244_ISTAT               0x1a
 #define MII_VSC8244_ISTAT_STATUS        0x8000
@@ -49,6 +51,12 @@
 #define MII_VSC8244_AUXCONSTAT_GBIT     0x0010
 #define MII_VSC8244_AUXCONSTAT_100      0x0008
 
+#define MII_VSC8221_AUXCONSTAT_INIT     0x0004 /* need to set this bit? */
+#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004
+
+#define PHY_ID_VSC8244                  0x000fc6c0
+#define PHY_ID_VSC8221                  0x000fc550
+
 MODULE_DESCRIPTION("Vitesse PHY driver");
 MODULE_AUTHOR("Kriston Carson");
 MODULE_LICENSE("GPL");
@@ -95,13 +103,15 @@ static int vsc824x_ack_interrupt(struct phy_device *phydev)
         return (err < 0) ? err : 0;
 }
 
-static int vsc824x_config_intr(struct phy_device *phydev)
+static int vsc82xx_config_intr(struct phy_device *phydev)
 {
         int err;
 
         if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
                 err = phy_write(phydev, MII_VSC8244_IMASK,
-                                MII_VSC8244_IMASK_MASK);
+                        phydev->drv->phy_id == PHY_ID_VSC8244 ?
+                                MII_VSC8244_IMASK_MASK :
+                                MII_VSC8221_IMASK_MASK);
         else {
                 /*
                  * The Vitesse PHY cannot clear the interrupt
@@ -120,7 +130,7 @@ static int vsc824x_config_intr(struct phy_device *phydev)
 
 /* Vitesse 824x */
 static struct phy_driver vsc8244_driver = {
-        .phy_id         = 0x000fc6c0,
+        .phy_id         = PHY_ID_VSC8244,
         .name           = "Vitesse VSC8244",
         .phy_id_mask    = 0x000fffc0,
         .features       = PHY_GBIT_FEATURES,
@@ -129,19 +139,55 @@ static struct phy_driver vsc8244_driver = {
         .config_aneg    = &genphy_config_aneg,
         .read_status    = &genphy_read_status,
         .ack_interrupt  = &vsc824x_ack_interrupt,
-        .config_intr    = &vsc824x_config_intr,
+        .config_intr    = &vsc82xx_config_intr,
         .driver         = { .owner = THIS_MODULE,},
 };
 
-static int __init vsc8244_init(void)
+static int vsc8221_config_init(struct phy_device *phydev)
 {
-        return phy_driver_register(&vsc8244_driver);
+        int err;
+
+        err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
+                        MII_VSC8221_AUXCONSTAT_INIT);
+        return err;
+
+        /* Perhaps we should set EXT_CON1 based on the interface?
+           Options are 802.3Z SerDes or SGMII */
+}
+
+/* Vitesse 8221 */
+static struct phy_driver vsc8221_driver = {
+        .phy_id         = PHY_ID_VSC8221,
+        .phy_id_mask    = 0x000ffff0,
+        .name           = "Vitesse VSC8221",
+        .features       = PHY_GBIT_FEATURES,
+        .flags          = PHY_HAS_INTERRUPT,
+        .config_init    = &vsc8221_config_init,
+        .config_aneg    = &genphy_config_aneg,
+        .read_status    = &genphy_read_status,
+        .ack_interrupt  = &vsc824x_ack_interrupt,
+        .config_intr    = &vsc82xx_config_intr,
+        .driver         = { .owner = THIS_MODULE,},
+};
+
+static int __init vsc82xx_init(void)
+{
+        int err;
+
+        err = phy_driver_register(&vsc8244_driver);
+        if (err < 0)
+                return err;
+        err = phy_driver_register(&vsc8221_driver);
+        if (err < 0)
+                phy_driver_unregister(&vsc8244_driver);
+        return err;
 }
 
-static void __exit vsc8244_exit(void)
+static void __exit vsc82xx_exit(void)
 {
         phy_driver_unregister(&vsc8244_driver);
+        phy_driver_unregister(&vsc8221_driver);
 }
 
-module_init(vsc8244_init);
-module_exit(vsc8244_exit);
+module_init(vsc82xx_init);
+module_exit(vsc82xx_exit);