Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  FEC: Fix kernel panic in fec_set_mac_address.
  ipv6: Fix default multicast hops setting.
  net: ep93xx_eth stops receiving packets
  drivers/net/phy: micrel phy driver
  dm9601: fix phy/eeprom write routine
  ppp_generic: handle non-linear skbs when passing them to pppd
  ppp_generic: pull 2 bytes so that PPP_PROTO(skb) is valid
  net: fix compile error due to double return type in SOCK_DEBUG
  net/usb: initiate sync sequence in sierra_net.c driver
  net/usb: remove default in Kconfig for sierra_net driver
  r8169: Fix rtl8169_rx_interrupt()
  e1000e: Fix oops caused by ASPM patch.
  net/sb1250: register mdio bus in probe
  sctp: Fix skb_over_panic resulting from multiple invalid parameter errors (CVE-2010-1173) (v4)
  p54pci: fix bugs in p54p_check_tx_ring

3 files changed, 110 insertions, 0 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index fc5938ba3d78..a527e37728cd 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -88,6 +88,11 @@ config LSI_ET1011C_PHY
         ---help---
           Supports the LSI ET1011C PHY.
 
+config MICREL_PHY
+        tristate "Driver for Micrel PHYs"
+        ---help---
+          Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
 config FIXED_PHY
         bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
         depends on PHYLIB=y
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 1342585af381..13bebab65d02 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
 obj-$(CONFIG_MDIO_GPIO)         += mdio-gpio.o
 obj-$(CONFIG_NATIONAL_PHY)      += national.o
 obj-$(CONFIG_STE10XP)           += ste10Xp.o
+obj-$(CONFIG_MICREL_PHY)        += micrel.o
 obj-$(CONFIG_MDIO_OCTEON)       += mdio-octeon.o
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
new file mode 100644
index 000000000000..0cd80e4d71d9
--- /dev/null
+++ b/drivers/net/phy/micrel.c
@@ -0,0 +1,104 @@
+/*
+ * drivers/net/phy/micrel.c
+ *
+ * Driver for Micrel PHYs
+ *
+ * Author: David J. Choi
+ *
+ * Copyright (c) 2010 Micrel, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Support : ksz9021 , vsc8201, ks8001
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define PHY_ID_KSZ9021                  0x00221611
+#define PHY_ID_VSC8201                  0x000FC413
+#define PHY_ID_KS8001                   0x0022161A
+
+
+static int kszphy_config_init(struct phy_device *phydev)
+{
+        return 0;
+}
+
+
+static struct phy_driver ks8001_driver = {
+        .phy_id         = PHY_ID_KS8001,
+        .phy_id_mask    = 0x00fffff0,
+        .features       = PHY_BASIC_FEATURES,
+        .flags          = PHY_POLL,
+        .config_init    = kszphy_config_init,
+        .config_aneg    = genphy_config_aneg,
+        .read_status    = genphy_read_status,
+        .driver         = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver vsc8201_driver = {
+        .phy_id         = PHY_ID_VSC8201,
+        .name           = "Micrel VSC8201",
+        .phy_id_mask    = 0x00fffff0,
+        .features       = PHY_BASIC_FEATURES,
+        .flags          = PHY_POLL,
+        .config_init    = kszphy_config_init,
+        .config_aneg    = genphy_config_aneg,
+        .read_status    = genphy_read_status,
+        .driver         = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ksz9021_driver = {
+        .phy_id         = PHY_ID_KSZ9021,
+        .phy_id_mask    = 0x000fff10,
+        .name           = "Micrel KSZ9021 Gigabit PHY",
+        .features       = PHY_GBIT_FEATURES | SUPPORTED_Pause,
+        .flags          = PHY_POLL,
+        .config_init    = kszphy_config_init,
+        .config_aneg    = genphy_config_aneg,
+        .read_status    = genphy_read_status,
+        .driver         = { .owner = THIS_MODULE, },
+};
+
+static int __init ksphy_init(void)
+{
+        int ret;
+
+        ret = phy_driver_register(&ks8001_driver);
+        if (ret)
+                goto err1;
+        ret = phy_driver_register(&vsc8201_driver);
+        if (ret)
+                goto err2;
+
+        ret = phy_driver_register(&ksz9021_driver);
+        if (ret)
+                goto err3;
+        return 0;
+
+err3:
+        phy_driver_unregister(&vsc8201_driver);
+err2:
+        phy_driver_unregister(&ks8001_driver);
+err1:
+        return ret;
+}
+
+static void __exit ksphy_exit(void)
+{
+        phy_driver_unregister(&ks8001_driver);
+        phy_driver_unregister(&vsc8201_driver);
+        phy_driver_unregister(&ksz9021_driver);
+}
+
+module_init(ksphy_init);
+module_exit(ksphy_exit);
+
+MODULE_DESCRIPTION("Micrel PHY driver");
+MODULE_AUTHOR("David J. Choi");
+MODULE_LICENSE("GPL");