pcmcia: do not use io_req_t after call to pcmcia_request_io()

After pcmcia_request_io(), do not make use of the values stored in
io_req_t, but instead use those found in struct pcmcia_device->resource[].

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 3 insertions, 3 deletions

diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 95a991beaa30..bba6369a028e 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -315,7 +315,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link)
         if (ret == 0) {
             /* calculate ConfigIndex value */
             link->conf.ConfigIndex = 
-                ((link->io.BasePort1 & 0x0f0) >> 3) | 0x22;
+                ((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
             return ret;
         }
     }
@@ -436,9 +436,9 @@ static int fmvj18x_config(struct pcmcia_device *link)
             goto failed;
 
     dev->irq = link->irq;
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
 
-    if (link->io.BasePort2 != 0) {
+    if (resource_size(link->resource[1]) != 0) {
         ret = fmvj18x_setup_mfc(link);
         if (ret != 0) goto failed;
     }