[PATCH] pcmcia: remove unneeded Vcc pseudo setting

As we do not allow setting Vcc in the pcmcia core, and Vpp1 and
Vpp2 can only be set to the same value, a lot of code can be
streamlined.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 1 insertions, 7 deletions

diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 62efbc7c2dca..34bf963b1296 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -257,7 +257,6 @@ static int fmvj18x_attach(struct pcmcia_device *p_dev)
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
     /* The FMVJ18x specific entries in the device structure. */
@@ -396,12 +395,7 @@ static void fmvj18x_config(dev_link_t *link)
         switch (le16_to_cpu(buf[0])) {
         case MANFID_TDK:
             cardtype = TDK;
-            if (le16_to_cpu(buf[1]) == PRODID_TDK_CF010) {
-                cs_status_t status;
-                pcmcia_get_status(handle, &status);
-                if (status.CardState & CS_EVENT_3VCARD)
-                    link->conf.Vcc = 33; /* inserted in 3.3V slot */
-            } else if (le16_to_cpu(buf[1]) == PRODID_TDK_GN3410
+            if (le16_to_cpu(buf[1]) == PRODID_TDK_GN3410
                         || le16_to_cpu(buf[1]) == PRODID_TDK_NP9610
                         || le16_to_cpu(buf[1]) == PRODID_TDK_MN3200) {
                 /* MultiFunction Card */