drivers/net: Trim trailing whitespace

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 35 insertions, 35 deletions

diff --git a/drivers/net/ne2.c b/drivers/net/ne2.c
index eebf5f02b476..5fccfea66d87 100644
--- a/drivers/net/ne2.c
+++ b/drivers/net/ne2.c
@@ -28,7 +28,7 @@
    - added support for Arco Electronics AE/2-card (experimental)
 
    Mon Sep 14 09:53:42 CET 1998 (David Weinehall)
-   - added support for Compex ENET-16MC/P (experimental) 
+   - added support for Compex ENET-16MC/P (experimental)
 
    Tue Sep 15 16:21:12 CET 1998 (David Weinehall, Magnus Jonsson, Tomas Ogren)
    - Miscellaneous bugfixes
@@ -44,11 +44,11 @@
    - Version# bump
 
    Mon Nov 16 15:28:23 CET 1998 (Wim Dumon)
-   - pass 'dev' as last parameter of request_irq in stead of 'NULL'   
+   - pass 'dev' as last parameter of request_irq in stead of 'NULL'
 
    Wed Feb  7 21:24:00 CET 2001 (Alfred Arnold)
    - added support for the D-Link DE-320CT
-   
+
    *    WARNING
         -------
         This is alpha-test software.  It is not guaranteed to work. As a
@@ -150,9 +150,9 @@ static void ne_block_output(struct net_device *dev, const int count,
 
 
 /*
- * special code to read the DE-320's MAC address EEPROM.  In contrast to a 
+ * special code to read the DE-320's MAC address EEPROM.  In contrast to a
  * standard NE design, this is a serial EEPROM (93C46) that has to be read
- * bit by bit.  The EEPROM cotrol port at base + 0x1e has the following 
+ * bit by bit.  The EEPROM cotrol port at base + 0x1e has the following
  * layout:
  *
  * Bit 0 = Data out (read from EEPROM)
@@ -218,7 +218,7 @@ static unsigned int __init dlink_get_eeprom(unsigned int eeaddr, unsigned int ad
 {
         int z;
         unsigned int value = 0;
- 
+
         /* pull the CS line low for a moment.  This resets the EEPROM-
            internal logic, and makes it ready for a new command. */
 
@@ -253,23 +253,23 @@ static int __init do_ne2_probe(struct net_device *dev)
 
         SET_MODULE_OWNER(dev);
 
-        /* Do not check any supplied i/o locations. 
+        /* Do not check any supplied i/o locations.
            POS registers usually don't fail :) */
 
-        /* MCA cards have POS registers.  
-           Autodetecting MCA cards is extremely simple. 
+        /* MCA cards have POS registers.
+           Autodetecting MCA cards is extremely simple.
            Just search for the card. */
 
         for(i = 0; (ne2_adapters[i].name != NULL) && !adapter_found; i++) {
-                current_mca_slot = 
+                current_mca_slot =
                         mca_find_unused_adapter(ne2_adapters[i].id, 0);
 
                 if((current_mca_slot != MCA_NOTFOUND) && !adapter_found) {
                         int res;
-                        mca_set_adapter_name(current_mca_slot, 
+                        mca_set_adapter_name(current_mca_slot,
                                         ne2_adapters[i].name);
                         mca_mark_as_used(current_mca_slot);
-                        
+
                         res = ne2_probe1(dev, current_mca_slot);
                         if (res)
                                 mca_mark_as_unused(current_mca_slot);
@@ -307,7 +307,7 @@ static int ne2_procinfo(char *buf, int slot, struct net_device *dev)
 
         len += sprintf(buf+len, "The NE/2 Ethernet Adapter\n" );
         len += sprintf(buf+len, "Driver written by Wim Dumon ");
-        len += sprintf(buf+len, "<wimpie@kotnet.org>\n"); 
+        len += sprintf(buf+len, "<wimpie@kotnet.org>\n");
         len += sprintf(buf+len, "Modified by ");
         len += sprintf(buf+len, "David Weinehall <tao@acc.umu.se>\n");
         len += sprintf(buf+len, "and by Magnus Jonsson <bigfoot@acc.umu.se>\n");
@@ -316,8 +316,8 @@ static int ne2_procinfo(char *buf, int slot, struct net_device *dev)
         len += sprintf(buf+len, "IRQ    : %d\n", dev->irq);
 
 #define HW_ADDR(i) dev->dev_addr[i]
-        len += sprintf(buf+len, "HW addr : %x:%x:%x:%x:%x:%x\n", 
-                        HW_ADDR(0), HW_ADDR(1), HW_ADDR(2), 
+        len += sprintf(buf+len, "HW addr : %x:%x:%x:%x:%x:%x\n",
+                        HW_ADDR(0), HW_ADDR(1), HW_ADDR(2),
                         HW_ADDR(3), HW_ADDR(4), HW_ADDR(5) );
 #undef HW_ADDR
 
@@ -370,7 +370,7 @@ static int __init ne2_probe1(struct net_device *dev, int slot)
 
 #ifndef CRYNWR_WAY
         /* Reset the card the way they do it in the Crynwr packet driver */
-        for (i=0; i<8; i++) 
+        for (i=0; i<8; i++)
                 outb(0x0, base_addr + NE_RESET);
         inb(base_addr + NE_RESET);
         outb(0x21, base_addr + NE_CMD);
@@ -388,10 +388,10 @@ static int __init ne2_probe1(struct net_device *dev, int slot)
 
 #else  /* _I_ never tested it this way .. Go ahead and try ...*/
         /* Reset card. Who knows what dain-bramaged state it was left in. */
-        { 
+        {
                 unsigned long reset_start_time = jiffies;
 
-                /* DON'T change these to inb_p/outb_p or reset will fail on 
+                /* DON'T change these to inb_p/outb_p or reset will fail on
                    clones.. */
                 outb(inb(base_addr + NE_RESET), base_addr + NE_RESET);
 
@@ -408,16 +408,16 @@ static int __init ne2_probe1(struct net_device *dev, int slot)
 
 
         /* Read the 16 bytes of station address PROM.
-           We must first initialize registers, similar to 
+           We must first initialize registers, similar to
            NS8390_init(eifdev, 0).
            We can't reliably read the SAPROM address without this.
            (I learned the hard way!). */
         {
-                struct { 
-                        unsigned char value, offset; 
+                struct {
+                        unsigned char value, offset;
                 } program_seq[] = {
                                                 /* Select page 0 */
-                        {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, 
+                        {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD},
                         {0x49,  EN0_DCFG},  /* Set WORD-wide (0x49) access. */
                         {0x00,  EN0_RCNTLO},  /* Clear the count regs. */
                         {0x00,  EN0_RCNTHI},
@@ -433,7 +433,7 @@ static int __init ne2_probe1(struct net_device *dev, int slot)
                 };
 
                 for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
-                        outb_p(program_seq[i].value, base_addr + 
+                        outb_p(program_seq[i].value, base_addr +
                                 program_seq[i].offset);
 
         }
@@ -464,7 +464,7 @@ static int __init ne2_probe1(struct net_device *dev, int slot)
            share and the board will usually be enabled. */
         retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev);
         if (retval) {
-                printk (" unable to get IRQ %d (irqval=%d).\n", 
+                printk (" unable to get IRQ %d (irqval=%d).\n",
                                 dev->irq, retval);
                 goto out;
         }
@@ -496,9 +496,9 @@ static int __init ne2_probe1(struct net_device *dev, int slot)
         ei_status.block_input = &ne_block_input;
         ei_status.block_output = &ne_block_output;
         ei_status.get_8390_hdr = &ne_get_8390_hdr;
-        
+
         ei_status.priv = slot;
-        
+
         dev->open = &ne_open;
         dev->stop = &ne_close;
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -538,7 +538,7 @@ static void ne_reset_8390(struct net_device *dev)
 {
         unsigned long reset_start_time = jiffies;
 
-        if (ei_debug > 1) 
+        if (ei_debug > 1)
                 printk("resetting the 8390 t=%ld...", jiffies);
 
         /* DON'T change these to inb_p/outb_p or reset will fail on clones. */
@@ -550,7 +550,7 @@ static void ne_reset_8390(struct net_device *dev)
         /* This check _should_not_ be necessary, omit eventually. */
         while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
                 if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
-                        printk("%s: ne_reset_8390() did not complete.\n", 
+                        printk("%s: ne_reset_8390() did not complete.\n",
                                         dev->name);
                         break;
                 }
@@ -561,13 +561,13 @@ static void ne_reset_8390(struct net_device *dev)
    we don't need to be concerned with ring wrap as the header will be at
    the start of a page, so we optimize accordingly. */
 
-static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, 
+static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
                 int ring_page)
 {
 
         int nic_base = dev->base_addr;
 
-        /* This *shouldn't* happen. 
+        /* This *shouldn't* happen.
            If it does, it's the last thing you'll see */
         if (ei_status.dmaing) {
                 printk("%s: DMAing conflict in ne_get_8390_hdr "
@@ -585,10 +585,10 @@ static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
         outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD);
 
         if (ei_status.word16)
-                insw(NE_BASE + NE_DATAPORT, hdr, 
+                insw(NE_BASE + NE_DATAPORT, hdr,
                                 sizeof(struct e8390_pkt_hdr)>>1);
         else
-                insb(NE_BASE + NE_DATAPORT, hdr, 
+                insb(NE_BASE + NE_DATAPORT, hdr,
                                 sizeof(struct e8390_pkt_hdr));
 
         outb_p(ENISR_RDC, nic_base + EN0_ISR);  /* Ack intr. */
@@ -600,7 +600,7 @@ static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
    hints. The NEx000 doesn't share the on-board packet memory -- you have
    to put the packet out through the "remote DMA" dataport using outb. */
 
-static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb, 
+static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb,
                 int ring_offset)
 {
 #ifdef NE_SANITY_CHECK
@@ -609,7 +609,7 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk
         int nic_base = dev->base_addr;
         char *buf = skb->data;
 
-        /* This *shouldn't* happen. 
+        /* This *shouldn't* happen.
            If it does, it's the last thing you'll see */
         if (ei_status.dmaing) {
                 printk("%s: DMAing conflict in ne_block_input "
@@ -677,7 +677,7 @@ static void ne_block_output(struct net_device *dev, int count,
         if (ei_status.word16 && (count & 0x01))
                 count++;
 
-        /* This *shouldn't* happen. 
+        /* This *shouldn't* happen.
            If it does, it's the last thing you'll see */
         if (ei_status.dmaing) {
                 printk("%s: DMAing conflict in ne_block_output."