[netdrvr] Remove Linux-specific changelogs from several Becker template drivers

When in-kernel net drivers branched from Donald Becker's vanilla driver
set, in the days before BitKeeper and git, a driver changelog was
maintained in the driver source code.  These days, the kernel's
changelog is far superior and much more accurate, so the in-driver
changelogs are removed.

Another relic of the Becker/kernel split was version numbering, using
"foo-LKx.y.z" notation, resulting in weird version numbers like
"1.17b-LK1.1.9".  These drivers are for older hardware, and see few
changes these days, so the version numbers were all bumped to something
more simple.

Finally, in xircom_tulip_cb specifically, an additional cleanup removes
the always-enabled CARDBUS cpp macro.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 3 insertions, 114 deletions

diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 9df2628be1e7..db0475a1102f 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -20,120 +20,9 @@
 
         Support information and updates available at
         http://www.scyld.com/network/netsemi.html
+        [link no longer provides useful info -jgarzik]
 
 
-        Linux kernel modifications:
-
-        Version 1.0.1:
-                - Spinlock fixes
-                - Bug fixes and better intr performance (Tjeerd)
-        Version 1.0.2:
-                - Now reads correct MAC address from eeprom
-        Version 1.0.3:
-                - Eliminate redundant priv->tx_full flag
-                - Call netif_start_queue from dev->tx_timeout
-                - wmb() in start_tx() to flush data
-                - Update Tx locking
-                - Clean up PCI enable (davej)
-        Version 1.0.4:
-                - Merge Donald Becker's natsemi.c version 1.07
-        Version 1.0.5:
-                - { fill me in }
-        Version 1.0.6:
-                * ethtool support (jgarzik)
-                * Proper initialization of the card (which sometimes
-                fails to occur and leaves the card in a non-functional
-                state). (uzi)
-
-                * Some documented register settings to optimize some
-                of the 100Mbit autodetection circuitry in rev C cards. (uzi)
-
-                * Polling of the PHY intr for stuff like link state
-                change and auto- negotiation to finally work properly. (uzi)
-
-                * One-liner removal of a duplicate declaration of
-                netdev_error(). (uzi)
-
-        Version 1.0.7: (Manfred Spraul)
-                * pci dma
-                * SMP locking update
-                * full reset added into tx_timeout
-                * correct multicast hash generation (both big and little endian)
-                        [copied from a natsemi driver version
-                         from Myrio Corporation, Greg Smith]
-                * suspend/resume
-
-        version 1.0.8 (Tim Hockin <thockin@sun.com>)
-                * ETHTOOL_* support
-                * Wake on lan support (Erik Gilling)
-                * MXDMA fixes for serverworks
-                * EEPROM reload
-
-        version 1.0.9 (Manfred Spraul)
-                * Main change: fix lack of synchronize
-                netif_close/netif_suspend against a last interrupt
-                or packet.
-                * do not enable superflous interrupts (e.g. the
-                drivers relies on TxDone - TxIntr not needed)
-                * wait that the hardware has really stopped in close
-                and suspend.
-                * workaround for the (at least) gcc-2.95.1 compiler
-                problem. Also simplifies the code a bit.
-                * disable_irq() in tx_timeout - needed to protect
-                against rx interrupts.
-                * stop the nic before switching into silent rx mode
-                for wol (required according to docu).
-
-        version 1.0.10:
-                * use long for ee_addr (various)
-                * print pointers properly (DaveM)
-                * include asm/irq.h (?)
-
-        version 1.0.11:
-                * check and reset if PHY errors appear (Adrian Sun)
-                * WoL cleanup (Tim Hockin)
-                * Magic number cleanup (Tim Hockin)
-                * Don't reload EEPROM on every reset (Tim Hockin)
-                * Save and restore EEPROM state across reset (Tim Hockin)
-                * MDIO Cleanup (Tim Hockin)
-                * Reformat register offsets/bits (jgarzik)
-
-        version 1.0.12:
-                * ETHTOOL_* further support (Tim Hockin)
-
-        version 1.0.13:
-                * ETHTOOL_[G]EEPROM support (Tim Hockin)
-
-        version 1.0.13:
-                * crc cleanup (Matt Domsch <Matt_Domsch@dell.com>)
-
-        version 1.0.14:
-                * Cleanup some messages and autoneg in ethtool (Tim Hockin)
-
-        version 1.0.15:
-                * Get rid of cable_magic flag
-                * use new (National provided) solution for cable magic issue
-
-        version 1.0.16:
-                * call netdev_rx() for RxErrors (Manfred Spraul)
-                * formatting and cleanups
-                * change options and full_duplex arrays to be zero
-                  initialized
-                * enable only the WoL and PHY interrupts in wol mode
-
-        version 1.0.17:
-                * only do cable_magic on 83815 and early 83816 (Tim Hockin)
-                * create a function for rx refill (Manfred Spraul)
-                * combine drain_ring and init_ring (Manfred Spraul)
-                * oom handling (Manfred Spraul)
-                * hands_off instead of playing with netif_device_{de,a}ttach
-                  (Manfred Spraul)
-                * be sure to write the MAC back to the chip (Manfred Spraul)
-                * lengthen EEPROM timeout, and always warn about timeouts
-                  (Manfred Spraul)
-                * comments update (Manfred)
-                * do the right thing on a phy-reset (Manfred and Tim)
-
         TODO:
         * big endian support with CFG:BEM instead of cpu_to_le32
 */
@@ -165,8 +54,8 @@
 #include <asm/uaccess.h>
 
 #define DRV_NAME        "natsemi"
-#define DRV_VERSION     "1.07+LK1.0.17"
-#define DRV_RELDATE     "Sep 27, 2002"
+#define DRV_VERSION     "2.0"
+#define DRV_RELDATE     "June 27, 2006"
 
 #define RX_OFFSET       2