Merge branch 'master' of /home/trondmy/kernel/linux-2.6/

1 files changed, 205 insertions, 0 deletions

diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h
new file mode 100644
index 000000000000..0a6cae6cb186
--- /dev/null
+++ b/drivers/net/myri10ge/myri10ge_mcp.h
@@ -0,0 +1,205 @@
+#ifndef __MYRI10GE_MCP_H__
+#define __MYRI10GE_MCP_H__
+
+#define MXGEFW_VERSION_MAJOR    1
+#define MXGEFW_VERSION_MINOR    4
+
+/* 8 Bytes */
+struct mcp_dma_addr {
+        u32 high;
+        u32 low;
+};
+
+/* 4 Bytes */
+struct mcp_slot {
+        u16 checksum;
+        u16 length;
+};
+
+/* 64 Bytes */
+struct mcp_cmd {
+        u32 cmd;
+        u32 data0;              /* will be low portion if data > 32 bits */
+        /* 8 */
+        u32 data1;              /* will be high portion if data > 32 bits */
+        u32 data2;              /* currently unused.. */
+        /* 16 */
+        struct mcp_dma_addr response_addr;
+        /* 24 */
+        u8 pad[40];
+};
+
+/* 8 Bytes */
+struct mcp_cmd_response {
+        u32 data;
+        u32 result;
+};
+
+/*
+ * flags used in mcp_kreq_ether_send_t:
+ *
+ * The SMALL flag is only needed in the first segment. It is raised
+ * for packets that are total less or equal 512 bytes.
+ *
+ * The CKSUM flag must be set in all segments.
+ *
+ * The PADDED flags is set if the packet needs to be padded, and it
+ * must be set for all segments.
+ *
+ * The  MXGEFW_FLAGS_ALIGN_ODD must be set if the cumulative
+ * length of all previous segments was odd.
+ */
+
+#define MXGEFW_FLAGS_SMALL      0x1
+#define MXGEFW_FLAGS_TSO_HDR    0x1
+#define MXGEFW_FLAGS_FIRST      0x2
+#define MXGEFW_FLAGS_ALIGN_ODD  0x4
+#define MXGEFW_FLAGS_CKSUM      0x8
+#define MXGEFW_FLAGS_TSO_LAST   0x8
+#define MXGEFW_FLAGS_NO_TSO     0x10
+#define MXGEFW_FLAGS_TSO_CHOP   0x10
+#define MXGEFW_FLAGS_TSO_PLD    0x20
+
+#define MXGEFW_SEND_SMALL_SIZE  1520
+#define MXGEFW_MAX_MTU          9400
+
+union mcp_pso_or_cumlen {
+        u16 pseudo_hdr_offset;
+        u16 cum_len;
+};
+
+#define MXGEFW_MAX_SEND_DESC 12
+#define MXGEFW_PAD          2
+
+/* 16 Bytes */
+struct mcp_kreq_ether_send {
+        u32 addr_high;
+        u32 addr_low;
+        u16 pseudo_hdr_offset;
+        u16 length;
+        u8 pad;
+        u8 rdma_count;
+        u8 cksum_offset;        /* where to start computing cksum */
+        u8 flags;               /* as defined above */
+};
+
+/* 8 Bytes */
+struct mcp_kreq_ether_recv {
+        u32 addr_high;
+        u32 addr_low;
+};
+
+/* Commands */
+
+#define MXGEFW_CMD_OFFSET 0xf80000
+
+enum myri10ge_mcp_cmd_type {
+        MXGEFW_CMD_NONE = 0,
+        /* Reset the mcp, it is left in a safe state, waiting
+         * for the driver to set all its parameters */
+        MXGEFW_CMD_RESET,
+
+        /* get the version number of the current firmware..
+         * (may be available in the eeprom strings..? */
+        MXGEFW_GET_MCP_VERSION,
+
+        /* Parameters which must be set by the driver before it can
+         * issue MXGEFW_CMD_ETHERNET_UP. They persist until the next
+         * MXGEFW_CMD_RESET is issued */
+
+        MXGEFW_CMD_SET_INTRQ_DMA,
+        MXGEFW_CMD_SET_BIG_BUFFER_SIZE, /* in bytes, power of 2 */
+        MXGEFW_CMD_SET_SMALL_BUFFER_SIZE,       /* in bytes */
+
+        /* Parameters which refer to lanai SRAM addresses where the
+         * driver must issue PIO writes for various things */
+
+        MXGEFW_CMD_GET_SEND_OFFSET,
+        MXGEFW_CMD_GET_SMALL_RX_OFFSET,
+        MXGEFW_CMD_GET_BIG_RX_OFFSET,
+        MXGEFW_CMD_GET_IRQ_ACK_OFFSET,
+        MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
+
+        /* Parameters which refer to rings stored on the MCP,
+         * and whose size is controlled by the mcp */
+
+        MXGEFW_CMD_GET_SEND_RING_SIZE,  /* in bytes */
+        MXGEFW_CMD_GET_RX_RING_SIZE,    /* in bytes */
+
+        /* Parameters which refer to rings stored in the host,
+         * and whose size is controlled by the host.  Note that
+         * all must be physically contiguous and must contain
+         * a power of 2 number of entries.  */
+
+        MXGEFW_CMD_SET_INTRQ_SIZE,      /* in bytes */
+
+        /* command to bring ethernet interface up.  Above parameters
+         * (plus mtu & mac address) must have been exchanged prior
+         * to issuing this command  */
+        MXGEFW_CMD_ETHERNET_UP,
+
+        /* command to bring ethernet interface down.  No further sends
+         * or receives may be processed until an MXGEFW_CMD_ETHERNET_UP
+         * is issued, and all interrupt queues must be flushed prior
+         * to ack'ing this command */
+
+        MXGEFW_CMD_ETHERNET_DOWN,
+
+        /* commands the driver may issue live, without resetting
+         * the nic.  Note that increasing the mtu "live" should
+         * only be done if the driver has already supplied buffers
+         * sufficiently large to handle the new mtu.  Decreasing
+         * the mtu live is safe */
+
+        MXGEFW_CMD_SET_MTU,
+        MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET,  /* in microseconds */
+        MXGEFW_CMD_SET_STATS_INTERVAL,  /* in microseconds */
+        MXGEFW_CMD_SET_STATS_DMA,
+
+        MXGEFW_ENABLE_PROMISC,
+        MXGEFW_DISABLE_PROMISC,
+        MXGEFW_SET_MAC_ADDRESS,
+
+        MXGEFW_ENABLE_FLOW_CONTROL,
+        MXGEFW_DISABLE_FLOW_CONTROL,
+
+        /* do a DMA test
+         * data0,data1 = DMA address
+         * data2       = RDMA length (MSH), WDMA length (LSH)
+         * command return data = repetitions (MSH), 0.5-ms ticks (LSH)
+         */
+        MXGEFW_DMA_TEST
+};
+
+enum myri10ge_mcp_cmd_status {
+        MXGEFW_CMD_OK = 0,
+        MXGEFW_CMD_UNKNOWN,
+        MXGEFW_CMD_ERROR_RANGE,
+        MXGEFW_CMD_ERROR_BUSY,
+        MXGEFW_CMD_ERROR_EMPTY,
+        MXGEFW_CMD_ERROR_CLOSED,
+        MXGEFW_CMD_ERROR_HASH_ERROR,
+        MXGEFW_CMD_ERROR_BAD_PORT,
+        MXGEFW_CMD_ERROR_RESOURCES
+};
+
+/* 40 Bytes */
+struct mcp_irq_data {
+        u32 send_done_count;
+
+        u32 link_up;
+        u32 dropped_link_overflow;
+        u32 dropped_link_error_or_filtered;
+        u32 dropped_runt;
+        u32 dropped_overrun;
+        u32 dropped_no_small_buffer;
+        u32 dropped_no_big_buffer;
+        u32 rdma_tags_available;
+
+        u8 tx_stopped;
+        u8 link_down;
+        u8 stats_updated;
+        u8 valid;
+};
+
+#endif                          /* __MYRI10GE_MCP_H__ */