[PATCH] mv643xx: Fix promiscuous mode handling

mv643xx_eth_get_config_reg() was reading the wrong register.
mv643xx_eth_set_config_reg() was or'ing instead of setting the
register.  These functions are trivial and both are called only from
mv643xx_eth_set_rx_mode() when changing to/from promiscuous mode.
Remove both functions and do the operations directly in
mv643xx_eth_set_rx_mode().

Also, maintain promiscuous mode setting across port resets.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 4 insertions, 58 deletions

diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 25a094c44f39..bb230e6c197b 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -259,14 +259,13 @@ static void mv643xx_eth_update_mac_address(struct net_device *dev)
 static void mv643xx_eth_set_rx_mode(struct net_device *dev)
 {
         struct mv643xx_private *mp = netdev_priv(dev);
-        u32 config_reg;
 
-        config_reg = ethernet_get_config_reg(mp->port_num);
         if (dev->flags & IFF_PROMISC)
-                config_reg |= (u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
+                mp->port_config |= (u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
         else
-                config_reg &= ~(u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
-        ethernet_set_config_reg(mp->port_num, config_reg);
+                mp->port_config &= ~(u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
+
+        mv_write(MV643XX_ETH_PORT_CONFIG_REG(mp->port_num), mp->port_config);
 }
 
 /*
@@ -2278,34 +2277,6 @@ static void eth_port_reset(unsigned int port_num)
         mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), reg_data);
 }
 
-/*
- * ethernet_set_config_reg - Set specified bits in configuration register.
- *
- * DESCRIPTION:
- *      This function sets specified bits in the given ethernet
- *      configuration register.
- *
- * INPUT:
- *      unsigned int    eth_port_num    Ethernet Port number.
- *      unsigned int    value           32 bit value.
- *
- * OUTPUT:
- *      The set bits in the value parameter are set in the configuration
- *      register.
- *
- * RETURN:
- *      None.
- *
- */
-static void ethernet_set_config_reg(unsigned int eth_port_num,
-                                                        unsigned int value)
-{
-        unsigned int eth_config_reg;
-
-        eth_config_reg = mv_read(MV643XX_ETH_PORT_CONFIG_REG(eth_port_num));
-        eth_config_reg |= value;
-        mv_write(MV643XX_ETH_PORT_CONFIG_REG(eth_port_num), eth_config_reg);
-}
 
 static int eth_port_autoneg_supported(unsigned int eth_port_num)
 {
@@ -2332,31 +2303,6 @@ static int eth_port_link_is_up(unsigned int eth_port_num)
 }
 
 /*
- * ethernet_get_config_reg - Get the port configuration register
- *
- * DESCRIPTION:
- *      This function returns the configuration register value of the given
- *      ethernet port.
- *
- * INPUT:
- *      unsigned int    eth_port_num    Ethernet Port number.
- *
- * OUTPUT:
- *      None.
- *
- * RETURN:
- *      Port configuration register value.
- */
-static unsigned int ethernet_get_config_reg(unsigned int eth_port_num)
-{
-        unsigned int eth_config_reg;
-
-        eth_config_reg = mv_read(MV643XX_ETH_PORT_CONFIG_EXTEND_REG
-                                                                (eth_port_num));
-        return eth_config_reg;
-}
-
-/*
  * eth_port_read_smi_reg - Read PHY registers
  *
  * DESCRIPTION: