net: Allow ethtool to set interface in loopback mode.

This patch enables ethtool to set the loopback mode on a given interface.
By configuring the interface in loopback mode in conjunction with a policy
route / rule, a userland application can stress the egress / ingress path
exposing the flows of the change in progress and potentially help developer(s)
understand the impact of those changes without even sending a packet out
on the network.

Following set of commands illustrates one such example -
    a) ip -4 addr add 192.168.1.1/24 dev eth1
    b) ip -4 rule add from all iif eth1 lookup 250
    c) ip -4 route add local 0/0 dev lo proto kernel scope host table 250
    d) arp -Ds 192.168.1.100 eth1
    e) arp -Ds 192.168.1.200 eth1
    f) sysctl -w net.ipv4.ip_nonlocal_bind=1
    g) sysctl -w net.ipv4.conf.all.accept_local=1
    # Assuming that the machine has 8 cores
    h) taskset 000f netserver -L 192.168.1.200
    i) taskset 00f0 netperf -t TCP_CRR -L 192.168.1.100 -H 192.168.1.200 -l 30

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 2 insertions, 1 deletions

diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index d70fb76edb77..4ce9e5f2c069 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -174,7 +174,8 @@ static void loopback_setup(struct net_device *dev)
                 | NETIF_F_HIGHDMA
                 | NETIF_F_LLTX
                 | NETIF_F_NETNS_LOCAL
-                | NETIF_F_VLAN_CHALLENGED;
+                | NETIF_F_VLAN_CHALLENGED
+                | NETIF_F_LOOPBACK;
         dev->ethtool_ops        = &loopback_ethtool_ops;
         dev->header_ops         = &eth_header_ops;
         dev->netdev_ops         = &loopback_ops;