drivers/net: Move && and || to end of previous line

Only files where David Miller is the primary git-signer.
wireless, wimax, ixgbe, etc are not modified.

Compile tested x86 allyesconfig only
Not all files compiled (not x86 compatible)

Added a few > 80 column lines, which I ignored.
Existing checkpatch complaints ignored.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 6 insertions, 6 deletions

diff --git a/drivers/net/lance.c b/drivers/net/lance.c
index 7b2c42992c35..8d7d3d4625f6 100644
--- a/drivers/net/lance.c
+++ b/drivers/net/lance.c
@@ -493,14 +493,14 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int
                 static const short ioaddr_table[] = { 0x300, 0x320, 0x340, 0x360};
                 int hp_port = (readl(bios + 1) & 1)  ? 0x499 : 0x99;
                 /* We can have boards other than the built-in!  Verify this is on-board. */
-                if ((inb(hp_port) & 0xc0) == 0x80
-                        && ioaddr_table[inb(hp_port) & 3] == ioaddr)
+                if ((inb(hp_port) & 0xc0) == 0x80 &&
+                    ioaddr_table[inb(hp_port) & 3] == ioaddr)
                         hp_builtin = hp_port;
         }
         iounmap(bios);
         /* We also recognize the HP Vectra on-board here, but check below. */
-        hpJ2405A = (inb(ioaddr) == 0x08 && inb(ioaddr+1) == 0x00
-                                && inb(ioaddr+2) == 0x09);
+        hpJ2405A = (inb(ioaddr) == 0x08 && inb(ioaddr+1) == 0x00 &&
+                    inb(ioaddr+2) == 0x09);
 
         /* Reset the LANCE.      */
         reset_val = inw(ioaddr+LANCE_RESET); /* Reset the LANCE */
@@ -1035,8 +1035,8 @@ static irqreturn_t lance_interrupt(int irq, void *dev_id)
         spin_lock (&lp->devlock);
 
         outw(0x00, dev->base_addr + LANCE_ADDR);
-        while ((csr0 = inw(dev->base_addr + LANCE_DATA)) & 0x8600
-                   && --boguscnt >= 0) {
+        while ((csr0 = inw(dev->base_addr + LANCE_DATA)) & 0x8600 &&
+               --boguscnt >= 0) {
                 /* Acknowledge all of the current interrupt sources ASAP. */
                 outw(csr0 & ~0x004f, dev->base_addr + LANCE_DATA);