Pull pnpacpi into acpica branch

1 files changed, 245 insertions, 0 deletions

diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
new file mode 100644
index 000000000000..d82651a97bae
--- /dev/null
+++ b/drivers/net/ixp2000/enp2611.c
@@ -0,0 +1,245 @@
+/*
+ * IXP2400 MSF network device driver for the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <asm/arch/uengine.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include "ixpdev.h"
+#include "caleb.h"
+#include "ixp2400-msf.h"
+#include "pm3386.h"
+
+/***********************************************************************
+ * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC
+ * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA
+ * to the IXP2400.
+ *
+ *                +-------------+
+ * SFP GBIC #0 ---+             |       +---------+
+ *                |  PM3386 #0  +-------+         |
+ * SFP GBIC #1 ---+             |       | "Caleb" |         +---------+
+ *                +-------------+       |         |         |         |
+ *                                      | SPI-3   +---------+ IXP2400 |
+ *                +-------------+       | bridge  |         |         |
+ * SFP GBIC #2 ---+             |       | FPGA    |         +---------+
+ *                |  PM3386 #1  +-------+         |
+ *                |             |       +---------+
+ *                +-------------+
+ *              ^                   ^                  ^
+ *              | 1.25Gbaud         | 104MHz           | 104MHz
+ *              | SERDES ea.        | SPI-3 ea.        | SPI-3
+ *
+ ***********************************************************************/
+static struct ixp2400_msf_parameters enp2611_msf_parameters =
+{
+        .rx_mode =              IXP2400_RX_MODE_UTOPIA_POS |
+                                IXP2400_RX_MODE_1x32 |
+                                IXP2400_RX_MODE_MPHY |
+                                IXP2400_RX_MODE_MPHY_32 |
+                                IXP2400_RX_MODE_MPHY_POLLED_STATUS |
+                                IXP2400_RX_MODE_MPHY_LEVEL3 |
+                                IXP2400_RX_MODE_RBUF_SIZE_64,
+
+        .rxclk01_multiplier =   IXP2400_PLL_MULTIPLIER_16,
+
+        .rx_poll_ports =        3,
+
+        .rx_channel_mode = {
+                IXP2400_PORT_RX_MODE_MASTER |
+                IXP2400_PORT_RX_MODE_POS_PHY |
+                IXP2400_PORT_RX_MODE_POS_PHY_L3 |
+                IXP2400_PORT_RX_MODE_ODD_PARITY |
+                IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
+
+                IXP2400_PORT_RX_MODE_MASTER |
+                IXP2400_PORT_RX_MODE_POS_PHY |
+                IXP2400_PORT_RX_MODE_POS_PHY_L3 |
+                IXP2400_PORT_RX_MODE_ODD_PARITY |
+                IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
+
+                IXP2400_PORT_RX_MODE_MASTER |
+                IXP2400_PORT_RX_MODE_POS_PHY |
+                IXP2400_PORT_RX_MODE_POS_PHY_L3 |
+                IXP2400_PORT_RX_MODE_ODD_PARITY |
+                IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
+
+                IXP2400_PORT_RX_MODE_MASTER |
+                IXP2400_PORT_RX_MODE_POS_PHY |
+                IXP2400_PORT_RX_MODE_POS_PHY_L3 |
+                IXP2400_PORT_RX_MODE_ODD_PARITY |
+                IXP2400_PORT_RX_MODE_2_CYCLE_DECODE
+        },
+
+        .tx_mode =              IXP2400_TX_MODE_UTOPIA_POS |
+                                IXP2400_TX_MODE_1x32 |
+                                IXP2400_TX_MODE_MPHY |
+                                IXP2400_TX_MODE_MPHY_32 |
+                                IXP2400_TX_MODE_MPHY_POLLED_STATUS |
+                                IXP2400_TX_MODE_MPHY_LEVEL3 |
+                                IXP2400_TX_MODE_TBUF_SIZE_64,
+
+        .txclk01_multiplier =   IXP2400_PLL_MULTIPLIER_16,
+
+        .tx_poll_ports =        3,
+
+        .tx_channel_mode = {
+                IXP2400_PORT_TX_MODE_MASTER |
+                IXP2400_PORT_TX_MODE_POS_PHY |
+                IXP2400_PORT_TX_MODE_ODD_PARITY |
+                IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
+
+                IXP2400_PORT_TX_MODE_MASTER |
+                IXP2400_PORT_TX_MODE_POS_PHY |
+                IXP2400_PORT_TX_MODE_ODD_PARITY |
+                IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
+
+                IXP2400_PORT_TX_MODE_MASTER |
+                IXP2400_PORT_TX_MODE_POS_PHY |
+                IXP2400_PORT_TX_MODE_ODD_PARITY |
+                IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
+
+                IXP2400_PORT_TX_MODE_MASTER |
+                IXP2400_PORT_TX_MODE_POS_PHY |
+                IXP2400_PORT_TX_MODE_ODD_PARITY |
+                IXP2400_PORT_TX_MODE_2_CYCLE_DECODE
+        }
+};
+
+struct enp2611_ixpdev_priv
+{
+        struct ixpdev_priv              ixpdev_priv;
+        struct net_device_stats         stats;
+};
+
+static struct net_device *nds[3];
+static struct timer_list link_check_timer;
+
+static struct net_device_stats *enp2611_get_stats(struct net_device *dev)
+{
+        struct enp2611_ixpdev_priv *ip = netdev_priv(dev);
+
+        pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats));
+
+        return &(ip->stats);
+}
+
+/* @@@ Poll the SFP moddef0 line too.  */
+/* @@@ Try to use the pm3386 DOOL interrupt as well.  */
+static void enp2611_check_link_status(unsigned long __dummy)
+{
+        int i;
+
+        for (i = 0; i < 3; i++) {
+                struct net_device *dev;
+                int status;
+
+                dev = nds[i];
+
+                status = pm3386_is_link_up(i);
+                if (status && !netif_carrier_ok(dev)) {
+                        /* @@@ Should report autonegotiation status.  */
+                        printk(KERN_INFO "%s: NIC Link is Up\n", dev->name);
+
+                        pm3386_enable_tx(i);
+                        caleb_enable_tx(i);
+                        netif_carrier_on(dev);
+                } else if (!status && netif_carrier_ok(dev)) {
+                        printk(KERN_INFO "%s: NIC Link is Down\n", dev->name);
+
+                        netif_carrier_off(dev);
+                        caleb_disable_tx(i);
+                        pm3386_disable_tx(i);
+                }
+        }
+
+        link_check_timer.expires = jiffies + HZ / 10;
+        add_timer(&link_check_timer);
+}
+
+static void enp2611_set_port_admin_status(int port, int up)
+{
+        if (up) {
+                caleb_enable_rx(port);
+
+                pm3386_set_carrier(port, 1);
+                pm3386_enable_rx(port);
+        } else {
+                caleb_disable_tx(port);
+                pm3386_disable_tx(port);
+                /* @@@ Flush out pending packets.  */
+                pm3386_set_carrier(port, 0);
+
+                pm3386_disable_rx(port);
+                caleb_disable_rx(port);
+        }
+}
+
+static int __init enp2611_init_module(void)
+{ 
+        int i;
+
+        if (!machine_is_enp2611())
+                return -ENODEV;
+
+        caleb_reset();
+        pm3386_reset();
+
+        for (i = 0; i < 3; i++) {
+                nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
+                if (nds[i] == NULL) {
+                        while (--i >= 0)
+                                free_netdev(nds[i]);
+                        return -ENOMEM;
+                }
+
+                SET_MODULE_OWNER(nds[i]);
+                nds[i]->get_stats = enp2611_get_stats;
+                pm3386_init_port(i);
+                pm3386_get_mac(i, nds[i]->dev_addr);
+        }
+
+        ixp2400_msf_init(&enp2611_msf_parameters);
+
+        if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) {
+                for (i = 0; i < 3; i++)
+                        free_netdev(nds[i]);
+                return -EINVAL;
+        }
+
+        init_timer(&link_check_timer);
+        link_check_timer.function = enp2611_check_link_status;
+        link_check_timer.expires = jiffies;
+        add_timer(&link_check_timer);
+
+        return 0;
+}
+
+static void __exit enp2611_cleanup_module(void)
+{
+        int i;
+
+        del_timer_sync(&link_check_timer);
+
+        ixpdev_deinit();
+        for (i = 0; i < 3; i++)
+                free_netdev(nds[i]);
+}
+
+module_init(enp2611_init_module);
+module_exit(enp2611_cleanup_module);
+MODULE_LICENSE("GPL");