ixgbe: Power down PHY during driver resets

The PHY laser is still on during driver init.  It's allowing
garbage to hit our FIFO, which eventually can cause the entire
device to die.  Power down the laser while setting up the device,
and re-enable the laser before getting link.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 48 insertions, 14 deletions

diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index b405a00817c6..12fc0e7ba2ca 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -39,6 +39,8 @@
 #define IXGBE_82599_MC_TBL_SIZE   128
 #define IXGBE_82599_VFT_TBL_SIZE  128
 
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
 void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
 s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
                                           ixgbe_link_speed speed,
@@ -69,8 +71,14 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
         if (hw->phy.multispeed_fiber) {
                 /* Set up dual speed SFP+ support */
                 mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+                mac->ops.disable_tx_laser =
+                                       &ixgbe_disable_tx_laser_multispeed_fiber;
+                mac->ops.enable_tx_laser =
+                                        &ixgbe_enable_tx_laser_multispeed_fiber;
                 mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
         } else {
+                mac->ops.disable_tx_laser = NULL;
+                mac->ops.enable_tx_laser = NULL;
                 mac->ops.flap_tx_laser = NULL;
                 if ((mac->ops.get_media_type(hw) ==
                      ixgbe_media_type_backplane) &&
@@ -415,6 +423,44 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
         return status;
 }
 
+ /**
+  *  ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
+  *  @hw: pointer to hardware structure
+  *
+  *  The base drivers may require better control over SFP+ module
+  *  PHY states.  This includes selectively shutting down the Tx
+  *  laser on the PHY, effectively halting physical link.
+  **/
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+        u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+        /* Disable tx laser; allow 100us to go dark per spec */
+        esdp_reg |= IXGBE_ESDP_SDP3;
+        IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+        IXGBE_WRITE_FLUSH(hw);
+        udelay(100);
+}
+
+/**
+ *  ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  The base drivers may require better control over SFP+ module
+ *  PHY states.  This includes selectively turning on the Tx
+ *  laser on the PHY, effectively starting physical link.
+ **/
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+        u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+        /* Enable tx laser; allow 100ms to light up */
+        esdp_reg &= ~IXGBE_ESDP_SDP3;
+        IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+        IXGBE_WRITE_FLUSH(hw);
+        msleep(100);
+}
+
 /**
  *  ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
  *  @hw: pointer to hardware structure
@@ -429,23 +475,11 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
  **/
 void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
 {
-        u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
-
         hw_dbg(hw, "ixgbe_flap_tx_laser_multispeed_fiber\n");
 
         if (hw->mac.autotry_restart) {
-                /* Disable tx laser; allow 100us to go dark per spec */
-                esdp_reg |= IXGBE_ESDP_SDP3;
-                IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
-                IXGBE_WRITE_FLUSH(hw);
-                udelay(100);
-
-                /* Enable tx laser; allow 100ms to light up */
-                esdp_reg &= ~IXGBE_ESDP_SDP3;
-                IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
-                IXGBE_WRITE_FLUSH(hw);
-                msleep(100);
-
+                ixgbe_disable_tx_laser_multispeed_fiber(hw);
+                ixgbe_enable_tx_laser_multispeed_fiber(hw);
                 hw->mac.autotry_restart = false;
         }
 }