Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 724 insertions, 0 deletions

diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
new file mode 100644
index 000000000000..50bebb55e9ee
--- /dev/null
+++ b/drivers/net/isa-skeleton.c
@@ -0,0 +1,724 @@
+/* isa-skeleton.c: A network driver outline for linux.
+ *
+ *      Written 1993-94 by Donald Becker.
+ *
+ *      Copyright 1993 United States Government as represented by the
+ *      Director, National Security Agency.
+ *
+ *      This software may be used and distributed according to the terms
+ *      of the GNU General Public License, incorporated herein by reference.
+ *
+ *      The author may be reached as becker@scyld.com, or C/O
+ *      Scyld Computing Corporation
+ *      410 Severn Ave., Suite 210
+ *      Annapolis MD 21403
+ *
+ *      This file is an outline for writing a network device driver for the
+ *      the Linux operating system.
+ *
+ *      To write (or understand) a driver, have a look at the "loopback.c" file to
+ *      get a feel of what is going on, and then use the code below as a skeleton
+ *      for the new driver.
+ *
+ */
+
+static const char *version =
+        "isa-skeleton.c:v1.51 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
+
+/*
+ *  Sources:
+ *      List your sources of programming information to document that
+ *      the driver is your own creation, and give due credit to others
+ *      that contributed to the work. Remember that GNU project code
+ *      cannot use proprietary or trade secret information. Interface
+ *      definitions are generally considered non-copyrightable to the
+ *      extent that the same names and structures must be used to be
+ *      compatible.
+ *
+ *      Finally, keep in mind that the Linux kernel is has an API, not
+ *      ABI. Proprietary object-code-only distributions are not permitted
+ *      under the GPL.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+/*
+ * The name of the card. Is used for messages and in the requests for
+ * io regions, irqs and dma channels
+ */
+static const char* cardname = "netcard";
+
+/* First, a few definitions that the brave might change. */
+
+/* A zero-terminated list of I/O addresses to be probed. */
+static unsigned int netcard_portlist[] __initdata =
+   { 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0};
+
+/* use 0 for production, 1 for verification, >2 for debug */
+#ifndef NET_DEBUG
+#define NET_DEBUG 2
+#endif
+static unsigned int net_debug = NET_DEBUG;
+
+/* The number of low I/O ports used by the ethercard. */
+#define NETCARD_IO_EXTENT       32
+
+#define MY_TX_TIMEOUT  ((400*HZ)/1000)
+
+/* Information that need to be kept for each board. */
+struct net_local {
+        struct net_device_stats stats;
+        long open_time;                 /* Useless example local info. */
+
+        /* Tx control lock.  This protects the transmit buffer ring
+         * state along with the "tx full" state of the driver.  This
+         * means all netif_queue flow control actions are protected
+         * by this lock as well.
+         */
+        spinlock_t lock;
+};
+
+/* The station (ethernet) address prefix, used for IDing the board. */
+#define SA_ADDR0 0x00
+#define SA_ADDR1 0x42
+#define SA_ADDR2 0x65
+
+/* Index to functions, as function prototypes. */
+
+static int      netcard_probe1(struct net_device *dev, int ioaddr);
+static int      net_open(struct net_device *dev);
+static int      net_send_packet(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void     net_rx(struct net_device *dev);
+static int      net_close(struct net_device *dev);
+static struct   net_device_stats *net_get_stats(struct net_device *dev);
+static void     set_multicast_list(struct net_device *dev);
+static void     net_tx_timeout(struct net_device *dev);
+
+
+/* Example routines you must write ;->. */
+#define tx_done(dev) 1
+static void     hardware_send_packet(short ioaddr, char *buf, int length);
+static void     chipset_init(struct net_device *dev, int startp);
+
+/*
+ * Check for a network adaptor of this type, and return '0' iff one exists.
+ * If dev->base_addr == 0, probe all likely locations.
+ * If dev->base_addr == 1, always return failure.
+ * If dev->base_addr == 2, allocate space for the device and return success
+ * (detachable devices only).
+ */
+static int __init do_netcard_probe(struct net_device *dev)
+{
+        int i;
+        int base_addr = dev->base_addr;
+        int irq = dev->irq;
+
+        SET_MODULE_OWNER(dev);
+
+        if (base_addr > 0x1ff)    /* Check a single specified location. */
+                return netcard_probe1(dev, base_addr);
+        else if (base_addr != 0)  /* Don't probe at all. */
+                return -ENXIO;
+
+        for (i = 0; netcard_portlist[i]; i++) {
+                int ioaddr = netcard_portlist[i];
+                if (netcard_probe1(dev, ioaddr) == 0)
+                        return 0;
+                dev->irq = irq;
+        }
+
+        return -ENODEV;
+}
+ 
+static void cleanup_card(struct net_device *dev)
+{
+#ifdef jumpered_dma
+        free_dma(dev->dma);
+#endif
+#ifdef jumpered_interrupts
+        free_irq(dev->irq, dev);
+#endif
+        release_region(dev->base_addr, NETCARD_IO_EXTENT);
+}
+
+#ifndef MODULE
+struct net_device * __init netcard_probe(int unit)
+{
+        struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+        int err;
+
+        if (!dev)
+                return ERR_PTR(-ENOMEM);
+
+        sprintf(dev->name, "eth%d", unit);
+        netdev_boot_setup_check(dev);
+
+        err = do_netcard_probe(dev);
+        if (err)
+                goto out;
+        err = register_netdev(dev);
+        if (err)
+                goto out1;
+        return dev;
+out1:
+        cleanup_card(dev);
+out:
+        free_netdev(dev);
+        return ERR_PTR(err);
+}
+#endif
+
+/*
+ * This is the real probe routine. Linux has a history of friendly device
+ * probes on the ISA bus. A good device probes avoids doing writes, and
+ * verifies that the correct device exists and functions.
+ */
+static int __init netcard_probe1(struct net_device *dev, int ioaddr)
+{
+        struct net_local *np;
+        static unsigned version_printed;
+        int i;
+        int err = -ENODEV;
+
+        /* Grab the region so that no one else tries to probe our ioports. */
+        if (!request_region(ioaddr, NETCARD_IO_EXTENT, cardname))
+                return -EBUSY;
+
+        /*
+         * For ethernet adaptors the first three octets of the station address 
+         * contains the manufacturer's unique code. That might be a good probe
+         * method. Ideally you would add additional checks.
+         */ 
+        if (inb(ioaddr + 0) != SA_ADDR0
+                ||       inb(ioaddr + 1) != SA_ADDR1
+                ||       inb(ioaddr + 2) != SA_ADDR2)
+                goto out;
+
+        if (net_debug  &&  version_printed++ == 0)
+                printk(KERN_DEBUG "%s", version);
+
+        printk(KERN_INFO "%s: %s found at %#3x, ", dev->name, cardname, ioaddr);
+
+        /* Fill in the 'dev' fields. */
+        dev->base_addr = ioaddr;
+
+        /* Retrieve and print the ethernet address. */
+        for (i = 0; i < 6; i++)
+                printk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
+
+        err = -EAGAIN;
+#ifdef jumpered_interrupts
+        /*
+         * If this board has jumpered interrupts, allocate the interrupt
+         * vector now. There is no point in waiting since no other device
+         * can use the interrupt, and this marks the irq as busy. Jumpered
+         * interrupts are typically not reported by the boards, and we must
+         * used autoIRQ to find them.
+         */
+
+        if (dev->irq == -1)
+                ;       /* Do nothing: a user-level program will set it. */
+        else if (dev->irq < 2) {        /* "Auto-IRQ" */
+                unsigned long irq_mask = probe_irq_on();
+                /* Trigger an interrupt here. */
+
+                dev->irq = probe_irq_off(irq_mask);
+                if (net_debug >= 2)
+                        printk(" autoirq is %d", dev->irq);
+        } else if (dev->irq == 2)
+                /*
+                 * Fixup for users that don't know that IRQ 2 is really
+                 * IRQ9, or don't know which one to set.
+                 */
+                dev->irq = 9;
+
+        {
+                int irqval = request_irq(dev->irq, &net_interrupt, 0, cardname, dev);
+                if (irqval) {
+                        printk("%s: unable to get IRQ %d (irqval=%d).\n",
+                                   dev->name, dev->irq, irqval);
+                        goto out;
+                }
+        }
+#endif  /* jumpered interrupt */
+#ifdef jumpered_dma
+        /*
+         * If we use a jumpered DMA channel, that should be probed for and
+         * allocated here as well. See lance.c for an example.
+         */
+        if (dev->dma == 0) {
+                if (request_dma(dev->dma, cardname)) {
+                        printk("DMA %d allocation failed.\n", dev->dma);
+                        goto out1;
+                } else
+                        printk(", assigned DMA %d.\n", dev->dma);
+        } else {
+                short dma_status, new_dma_status;
+
+                /* Read the DMA channel status registers. */
+                dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
+                        (inb(DMA2_STAT_REG) & 0xf0);
+                /* Trigger a DMA request, perhaps pause a bit. */
+                outw(0x1234, ioaddr + 8);
+                /* Re-read the DMA status registers. */
+                new_dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
+                        (inb(DMA2_STAT_REG) & 0xf0);
+                /*
+                 * Eliminate the old and floating requests,
+                 * and DMA4 the cascade.
+                 */
+                new_dma_status ^= dma_status;
+                new_dma_status &= ~0x10;
+                for (i = 7; i > 0; i--)
+                        if (test_bit(i, &new_dma_status)) {
+                                dev->dma = i;
+                                break;
+                        }
+                if (i <= 0) {
+                        printk("DMA probe failed.\n");
+                        goto out1;
+                } 
+                if (request_dma(dev->dma, cardname)) {
+                        printk("probed DMA %d allocation failed.\n", dev->dma);
+                        goto out1;
+                }
+        }
+#endif  /* jumpered DMA */
+
+        np = netdev_priv(dev);
+        spin_lock_init(&np->lock);
+
+        dev->open               = net_open;
+        dev->stop               = net_close;
+        dev->hard_start_xmit    = net_send_packet;
+        dev->get_stats          = net_get_stats;
+        dev->set_multicast_list = &set_multicast_list;
+
+        dev->tx_timeout         = &net_tx_timeout;
+        dev->watchdog_timeo     = MY_TX_TIMEOUT; 
+        return 0;
+out1:
+#ifdef jumpered_interrupts
+        free_irq(dev->irq, dev);
+#endif
+out:
+        release_region(base_addr, NETCARD_IO_EXTENT);
+        return err;
+}
+
+static void net_tx_timeout(struct net_device *dev)
+{
+        struct net_local *np = netdev_priv(dev);
+
+        printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
+               tx_done(dev) ? "IRQ conflict" : "network cable problem");
+
+        /* Try to restart the adaptor. */
+        chipset_init(dev, 1);
+
+        np->stats.tx_errors++;
+
+        /* If we have space available to accept new transmit
+         * requests, wake up the queueing layer.  This would
+         * be the case if the chipset_init() call above just
+         * flushes out the tx queue and empties it.
+         *
+         * If instead, the tx queue is retained then the
+         * netif_wake_queue() call should be placed in the
+         * TX completion interrupt handler of the driver instead
+         * of here.
+         */
+        if (!tx_full(dev))
+                netif_wake_queue(dev);
+}
+
+/*
+ * Open/initialize the board. This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+static int
+net_open(struct net_device *dev)
+{
+        struct net_local *np = netdev_priv(dev);
+        int ioaddr = dev->base_addr;
+        /*
+         * This is used if the interrupt line can turned off (shared).
+         * See 3c503.c for an example of selecting the IRQ at config-time.
+         */
+        if (request_irq(dev->irq, &net_interrupt, 0, cardname, dev)) {
+                return -EAGAIN;
+        }
+        /*
+         * Always allocate the DMA channel after the IRQ,
+         * and clean up on failure.
+         */
+        if (request_dma(dev->dma, cardname)) {
+                free_irq(dev->irq, dev);
+                return -EAGAIN;
+        }
+
+        /* Reset the hardware here. Don't forget to set the station address. */
+        chipset_init(dev, 1);
+        outb(0x00, ioaddr);
+        np->open_time = jiffies;
+
+        /* We are now ready to accept transmit requeusts from
+         * the queueing layer of the networking.
+         */
+        netif_start_queue(dev);
+
+        return 0;
+}
+
+/* This will only be invoked if your driver is _not_ in XOFF state.
+ * What this means is that you need not check it, and that this
+ * invariant will hold if you make sure that the netif_*_queue()
+ * calls are done at the proper times.
+ */
+static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+        struct net_local *np = netdev_priv(dev);
+        int ioaddr = dev->base_addr;
+        short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+        unsigned char *buf = skb->data;
+
+        /* If some error occurs while trying to transmit this
+         * packet, you should return '1' from this function.
+         * In such a case you _may not_ do anything to the
+         * SKB, it is still owned by the network queueing
+         * layer when an error is returned.  This means you
+         * may not modify any SKB fields, you may not free
+         * the SKB, etc.
+         */
+
+#if TX_RING
+        /* This is the most common case for modern hardware.
+         * The spinlock protects this code from the TX complete
+         * hardware interrupt handler.  Queue flow control is
+         * thus managed under this lock as well.
+         */
+        spin_lock_irq(&np->lock);
+
+        add_to_tx_ring(np, skb, length);
+        dev->trans_start = jiffies;
+
+        /* If we just used up the very last entry in the
+         * TX ring on this device, tell the queueing
+         * layer to send no more.
+         */
+        if (tx_full(dev))
+                netif_stop_queue(dev);
+
+        /* When the TX completion hw interrupt arrives, this
+         * is when the transmit statistics are updated.
+         */
+
+        spin_unlock_irq(&np->lock);
+#else
+        /* This is the case for older hardware which takes
+         * a single transmit buffer at a time, and it is
+         * just written to the device via PIO.
+         *
+         * No spin locking is needed since there is no TX complete
+         * event.  If by chance your card does have a TX complete
+         * hardware IRQ then you may need to utilize np->lock here.
+         */
+        hardware_send_packet(ioaddr, buf, length);
+        np->stats.tx_bytes += skb->len;
+
+        dev->trans_start = jiffies;
+
+        /* You might need to clean up and record Tx statistics here. */
+        if (inw(ioaddr) == /*RU*/81)
+                np->stats.tx_aborted_errors++;
+        dev_kfree_skb (skb);
+#endif
+
+        return 0;
+}
+
+#if TX_RING
+/* This handles TX complete events posted by the device
+ * via interrupts.
+ */
+void net_tx(struct net_device *dev)
+{
+        struct net_local *np = netdev_priv(dev);
+        int entry;
+
+        /* This protects us from concurrent execution of
+         * our dev->hard_start_xmit function above.
+         */
+        spin_lock(&np->lock);
+
+        entry = np->tx_old;
+        while (tx_entry_is_sent(np, entry)) {
+                struct sk_buff *skb = np->skbs[entry];
+
+                np->stats.tx_bytes += skb->len;
+                dev_kfree_skb_irq (skb);
+
+                entry = next_tx_entry(np, entry);
+        }
+        np->tx_old = entry;
+
+        /* If we had stopped the queue due to a "tx full"
+         * condition, and space has now been made available,
+         * wake up the queue.
+         */
+        if (netif_queue_stopped(dev) && ! tx_full(dev))
+                netif_wake_queue(dev);
+
+        spin_unlock(&np->lock);
+}
+#endif
+
+/*
+ * The typical workload of the driver:
+ * Handle the network interface interrupts.
+ */
+static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+        struct net_device *dev = dev_id;
+        struct net_local *np;
+        int ioaddr, status;
+        int handled = 0;
+
+        ioaddr = dev->base_addr;
+
+        np = netdev_priv(dev);
+        status = inw(ioaddr + 0);
+
+        if (status == 0)
+                goto out;
+        handled = 1;
+
+        if (status & RX_INTR) {
+                /* Got a packet(s). */
+                net_rx(dev);
+        }
+#if TX_RING
+        if (status & TX_INTR) {
+                /* Transmit complete. */
+                net_tx(dev);
+                np->stats.tx_packets++;
+                netif_wake_queue(dev);
+        }
+#endif
+        if (status & COUNTERS_INTR) {
+                /* Increment the appropriate 'localstats' field. */
+                np->stats.tx_window_errors++;
+        }
+out:
+        return IRQ_RETVAL(handled);
+}
+
+/* We have a good packet(s), get it/them out of the buffers. */
+static void
+net_rx(struct net_device *dev)
+{
+        struct net_local *lp = netdev_priv(dev);
+        int ioaddr = dev->base_addr;
+        int boguscount = 10;
+
+        do {
+                int status = inw(ioaddr);
+                int pkt_len = inw(ioaddr);
+          
+                if (pkt_len == 0)               /* Read all the frames? */
+                        break;                  /* Done for now */
+
+                if (status & 0x40) {    /* There was an error. */
+                        lp->stats.rx_errors++;
+                        if (status & 0x20) lp->stats.rx_frame_errors++;
+                        if (status & 0x10) lp->stats.rx_over_errors++;
+                        if (status & 0x08) lp->stats.rx_crc_errors++;
+                        if (status & 0x04) lp->stats.rx_fifo_errors++;
+                } else {
+                        /* Malloc up new buffer. */
+                        struct sk_buff *skb;
+
+                        lp->stats.rx_bytes+=pkt_len;
+                        
+                        skb = dev_alloc_skb(pkt_len);
+                        if (skb == NULL) {
+                                printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
+                                           dev->name);
+                                lp->stats.rx_dropped++;
+                                break;
+                        }
+                        skb->dev = dev;
+
+                        /* 'skb->data' points to the start of sk_buff data area. */
+                        memcpy(skb_put(skb,pkt_len), (void*)dev->rmem_start,
+                                   pkt_len);
+                        /* or */
+                        insw(ioaddr, skb->data, (pkt_len + 1) >> 1);
+
+                        netif_rx(skb);
+                        dev->last_rx = jiffies;
+                        lp->stats.rx_packets++;
+                        lp->stats.rx_bytes += pkt_len;
+                }
+        } while (--boguscount);
+
+        return;
+}
+
+/* The inverse routine to net_open(). */
+static int
+net_close(struct net_device *dev)
+{
+        struct net_local *lp = netdev_priv(dev);
+        int ioaddr = dev->base_addr;
+
+        lp->open_time = 0;
+
+        netif_stop_queue(dev);
+
+        /* Flush the Tx and disable Rx here. */
+
+        disable_dma(dev->dma);
+
+        /* If not IRQ or DMA jumpered, free up the line. */
+        outw(0x00, ioaddr+0);   /* Release the physical interrupt line. */
+
+        free_irq(dev->irq, dev);
+        free_dma(dev->dma);
+
+        /* Update the statistics here. */
+
+        return 0;
+
+}
+
+/*
+ * Get the current statistics.
+ * This may be called with the card open or closed.
+ */
+static struct net_device_stats *net_get_stats(struct net_device *dev)
+{
+        struct net_local *lp = netdev_priv(dev);
+        short ioaddr = dev->base_addr;
+
+        /* Update the statistics from the device registers. */
+        lp->stats.rx_missed_errors = inw(ioaddr+1);
+        return &lp->stats;
+}
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * num_addrs == -1      Promiscuous mode, receive all packets
+ * num_addrs == 0       Normal mode, clear multicast list
+ * num_addrs > 0        Multicast mode, receive normal and MC packets,
+ *                      and do best-effort filtering.
+ */
+static void
+set_multicast_list(struct net_device *dev)
+{
+        short ioaddr = dev->base_addr;
+        if (dev->flags&IFF_PROMISC)
+        {
+                /* Enable promiscuous mode */
+                outw(MULTICAST|PROMISC, ioaddr);
+        }
+        else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS)
+        {
+                /* Disable promiscuous mode, use normal mode. */
+                hardware_set_filter(NULL);
+
+                outw(MULTICAST, ioaddr);
+        }
+        else if(dev->mc_count)
+        {
+                /* Walk the address list, and load the filter */
+                hardware_set_filter(dev->mc_list);
+
+                outw(MULTICAST, ioaddr);
+        }
+        else 
+                outw(0, ioaddr);
+}
+
+#ifdef MODULE
+
+static struct net_device *this_device;
+static int io = 0x300;
+static int irq;
+static int dma;
+static int mem;
+MODULE_LICENSE("GPL");
+
+int init_module(void)
+{
+        struct net_device *dev;
+        int result;
+
+        if (io == 0)
+                printk(KERN_WARNING "%s: You shouldn't use auto-probing with insmod!\n",
+                           cardname);
+        dev = alloc_etherdev(sizeof(struct net_local));
+        if (!dev)
+                return -ENOMEM;
+
+        /* Copy the parameters from insmod into the device structure. */
+        dev->base_addr = io;
+        dev->irq       = irq;
+        dev->dma       = dma;
+        dev->mem_start = mem;
+        if (do_netcard_probe(dev) == 0) {
+                if (register_netdev(dev) == 0)
+                        this_device = dev;
+                        return 0;
+                }
+                cleanup_card(dev);
+        }
+        free_netdev(dev);
+        return -ENXIO;
+}
+
+void
+cleanup_module(void)
+{
+        unregister_netdev(this_device);
+        cleanup_card(this_device);
+        free_netdev(this_device);
+}
+
+#endif /* MODULE */
+
+/*
+ * Local variables:
+ *  compile-command:
+ *      gcc -D__KERNEL__ -Wall -Wstrict-prototypes -Wwrite-strings
+ *      -Wredundant-decls -O2 -m486 -c skeleton.c
+ *  version-control: t
+ *  kept-new-versions: 5
+ *  tab-width: 4
+ *  c-indent-level: 4
+ * End:
+ */