[IrDA]: Irport removal - part 2

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 164 deletions

diff --git a/drivers/net/irda/old_belkin.c b/drivers/net/irda/old_belkin.c
deleted file mode 100644
index 26f81fd28371..000000000000
--- a/drivers/net/irda/old_belkin.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      old_belkin.c
- * Version:       1.1
- * Description:   Driver for the Belkin (old) SmartBeam dongle
- * Status:        Experimental...
- * Author:        Jean Tourrilhes <jt@hpl.hp.com>
- * Created at:    22/11/99
- * Modified at:   Fri Dec 17 09:13:32 1999
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1999 Jean Tourrilhes, All Rights Reserved.
- *     
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- * 
- *     This program is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *     GNU General Public License for more details.
- * 
- *     You should have received a copy of the GNU General Public License 
- *     along with this program; if not, write to the Free Software 
- *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
- *     MA 02111-1307 USA
- *     
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-/*
- * Belkin is selling a dongle called the SmartBeam.
- * In fact, there is two hardware version of this dongle, of course with
- * the same name and looking the exactly same (grrr...).
- * I guess that I've got the old one, because inside I don't have
- * a jumper for IrDA/ASK...
- *
- * As far as I can make it from info on their web site, the old dongle 
- * support only 9600 b/s, which make our life much simpler as far as
- * the driver is concerned, but you might not like it very much ;-)
- * The new SmartBeam does 115 kb/s, and I've not tested it...
- *
- * Belkin claim that the correct driver for the old dongle (in Windows)
- * is the generic Parallax 9500a driver, but the Linux LiteLink driver
- * fails for me (probably because Linux-IrDA doesn't rate fallback),
- * so I created this really dumb driver...
- *
- * In fact, this driver doesn't do much. The only thing it does is to
- * prevent Linux-IrDA to use any other speed than 9600 b/s ;-) This
- * driver is called "old_belkin" so that when the new SmartBeam is supported
- * its driver can be called "belkin" instead of "new_belkin".
- *
- * Note : this driver was written without any info/help from Belkin,
- * so a lot of info here might be totally wrong. Blame me ;-)
- */
-
-/* Let's guess */
-#define MIN_DELAY 25      /* 15 us, but wait a little more to be sure */
-
-static void old_belkin_open(dongle_t *self, struct qos_info *qos);
-static void old_belkin_close(dongle_t *self);
-static int  old_belkin_change_speed(struct irda_task *task);
-static int  old_belkin_reset(struct irda_task *task);
-
-/* These are the baudrates supported */
-/* static __u32 baud_rates[] = { 9600 }; */
-
-static struct dongle_reg dongle = {
-        .type = IRDA_OLD_BELKIN_DONGLE,
-        .open = old_belkin_open,
-        .close = old_belkin_close,
-        .reset = old_belkin_reset,
-        .change_speed = old_belkin_change_speed,
-        .owner = THIS_MODULE,
-};
-
-static int __init old_belkin_init(void)
-{
-        return irda_device_register_dongle(&dongle);
-}
-
-static void __exit old_belkin_cleanup(void)
-{
-        irda_device_unregister_dongle(&dongle);
-}
-
-static void old_belkin_open(dongle_t *self, struct qos_info *qos)
-{
-        /* Not too fast, please... */
-        qos->baud_rate.bits &= IR_9600;
-        /* Needs at least 10 ms (totally wild guess, can do probably better) */
-        qos->min_turn_time.bits = 0x01;
-}
-
-static void old_belkin_close(dongle_t *self)
-{
-        /* Power off dongle */
-        self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function old_belkin_change_speed (task)
- *
- *    With only one speed available, not much to do...
- */
-static int old_belkin_change_speed(struct irda_task *task)
-{
-        irda_task_next_state(task, IRDA_TASK_DONE);
-
-        return 0;
-}
-
-/*
- * Function old_belkin_reset (task)
- *
- *      Reset the Old-Belkin type dongle.
- *
- */
-static int old_belkin_reset(struct irda_task *task)
-{
-        dongle_t *self = (dongle_t *) task->instance;
-
-        /* Power on dongle */
-        self->set_dtr_rts(self->dev, TRUE, TRUE);
-
-        /* Sleep a minimum of 15 us */
-        udelay(MIN_DELAY);
-
-        /* This dongles speed "defaults" to 9600 bps ;-) */
-        self->speed = 9600;
-
-        irda_task_next_state(task, IRDA_TASK_DONE);
-
-        return 0;
-}
-
-MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>");
-MODULE_DESCRIPTION("Belkin (old) SmartBeam dongle driver");     
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-7"); /* IRDA_OLD_BELKIN_DONGLE */
-
-/*
- * Function init_module (void)
- *
- *    Initialize Old-Belkin module
- *
- */
-module_init(old_belkin_init);
-
-/*
- * Function cleanup_module (void)
- *
- *    Cleanup Old-Belkin module
- *
- */
-module_exit(old_belkin_cleanup);