Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 576 insertions, 0 deletions

diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
new file mode 100644
index 000000000000..612ad452bee0
--- /dev/null
+++ b/drivers/net/hamradio/baycom_par.c
@@ -0,0 +1,576 @@
+/*****************************************************************************/
+
+/*
+ *      baycom_par.c  -- baycom par96 and picpar radio modem driver.
+ *
+ *      Copyright (C) 1996-2000  Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Please note that the GPL allows you to use the driver, NOT the radio.
+ *  In order to use the radio, you need a license from the communications
+ *  authority of your country.
+ *
+ *
+ *  Supported modems
+ *
+ *  par96:  This is a modem for 9600 baud FSK compatible to the G3RUH standard.
+ *          The modem does all the filtering and regenerates the receiver clock.
+ *          Data is transferred from and to the PC via a shift register.
+ *          The shift register is filled with 16 bits and an interrupt is
+ *          signalled. The PC then empties the shift register in a burst. This
+ *          modem connects to the parallel port, hence the name. The modem
+ *          leaves the implementation of the HDLC protocol and the scrambler
+ *          polynomial to the PC. This modem is no longer available (at least
+ *          from Baycom) and has been replaced by the PICPAR modem (see below).
+ *          You may however still build one from the schematics published in
+ *          cq-DL :-).
+ *
+ *  picpar: This is a redesign of the par96 modem by Henning Rech, DF9IC. The
+ *          modem is protocol compatible to par96, but uses only three low
+ *          power ICs and can therefore be fed from the parallel port and
+ *          does not require an additional power supply. It features
+ *          built in DCD circuitry. The driver should therefore be configured
+ *          for hardware DCD.
+ *
+ *
+ *  Command line options (insmod command line)
+ *
+ *  mode     driver mode string. Valid choices are par96 and picpar.
+ *  iobase   base address of the port; common values are 0x378, 0x278, 0x3bc
+ *
+ *
+ *  History:
+ *   0.1  26.06.1996  Adapted from baycom.c and made network driver interface
+ *        18.10.1996  Changed to new user space access routines (copy_{to,from}_user)
+ *   0.3  26.04.1997  init code/data tagged
+ *   0.4  08.07.1997  alternative ser12 decoding algorithm (uses delta CTS ints)
+ *   0.5  11.11.1997  split into separate files for ser12/par96
+ *   0.6  03.08.1999  adapt to Linus' new __setup/__initcall
+ *                    removed some pre-2.2 kernel compatibility cruft
+ *   0.7  10.08.1999  Check if parport can do SPP and is safe to access during interrupt contexts
+ *   0.8  12.02.2000  adapted to softnet driver interface
+ *                    removed direct parport access, uses parport driver methods
+ *   0.9  03.07.2000  fix interface name handling
+ */
+
+/*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/hdlcdrv.h>
+#include <linux/baycom.h>
+#include <linux/parport.h>
+#include <linux/bitops.h>
+
+#include <asm/bug.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+/* --------------------------------------------------------------------- */
+
+#define BAYCOM_DEBUG
+
+/*
+ * modem options; bit mask
+ */
+#define BAYCOM_OPTIONS_SOFTDCD  1
+
+/* --------------------------------------------------------------------- */
+
+static const char bc_drvname[] = "baycom_par";
+static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
+KERN_INFO "baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n";
+
+/* --------------------------------------------------------------------- */
+
+#define NR_PORTS 4
+
+static struct net_device *baycom_device[NR_PORTS];
+
+/* --------------------------------------------------------------------- */
+
+#define PAR96_BURSTBITS 16
+#define PAR96_BURST     4
+#define PAR96_PTT       2
+#define PAR96_TXBIT     1
+#define PAR96_ACK       0x40
+#define PAR96_RXBIT     0x20
+#define PAR96_DCD       0x10
+#define PAR97_POWER     0xf8
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Information that need to be kept for each board.
+ */
+
+struct baycom_state {
+        struct hdlcdrv_state hdrv;
+
+        struct pardevice *pdev;
+        unsigned int options;
+
+        struct modem_state {
+                short arb_divider;
+                unsigned char flags;
+                unsigned int shreg;
+                struct modem_state_par96 {
+                        int dcd_count;
+                        unsigned int dcd_shreg;
+                        unsigned long descram;
+                        unsigned long scram;
+                } par96;
+        } modem;
+
+#ifdef BAYCOM_DEBUG
+        struct debug_vals {
+                unsigned long last_jiffies;
+                unsigned cur_intcnt;
+                unsigned last_intcnt;
+                int cur_pllcorr;
+                int last_pllcorr;
+        } debug_vals;
+#endif /* BAYCOM_DEBUG */
+};
+
+/* --------------------------------------------------------------------- */
+
+static void __inline__ baycom_int_freq(struct baycom_state *bc)
+{
+#ifdef BAYCOM_DEBUG
+        unsigned long cur_jiffies = jiffies;
+        /*
+         * measure the interrupt frequency
+         */
+        bc->debug_vals.cur_intcnt++;
+        if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
+                bc->debug_vals.last_jiffies = cur_jiffies;
+                bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
+                bc->debug_vals.cur_intcnt = 0;
+                bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr;
+                bc->debug_vals.cur_pllcorr = 0;
+        }
+#endif /* BAYCOM_DEBUG */
+}
+
+/* --------------------------------------------------------------------- */
+/*
+ * ===================== PAR96 specific routines =========================
+ */
+
+#define PAR96_DESCRAM_TAP1 0x20000
+#define PAR96_DESCRAM_TAP2 0x01000
+#define PAR96_DESCRAM_TAP3 0x00001
+
+#define PAR96_DESCRAM_TAPSH1 17
+#define PAR96_DESCRAM_TAPSH2 12
+#define PAR96_DESCRAM_TAPSH3 0
+
+#define PAR96_SCRAM_TAP1 0x20000 /* X^17 */
+#define PAR96_SCRAM_TAPN 0x00021 /* X^0+X^5 */
+
+/* --------------------------------------------------------------------- */
+
+static __inline__ void par96_tx(struct net_device *dev, struct baycom_state *bc)
+{
+        int i;
+        unsigned int data = hdlcdrv_getbits(&bc->hdrv);
+        struct parport *pp = bc->pdev->port;
+
+        for(i = 0; i < PAR96_BURSTBITS; i++, data >>= 1) {
+                unsigned char val = PAR97_POWER;
+                bc->modem.par96.scram = ((bc->modem.par96.scram << 1) |
+                                         (bc->modem.par96.scram & 1));
+                if (!(data & 1))
+                        bc->modem.par96.scram ^= 1;
+                if (bc->modem.par96.scram & (PAR96_SCRAM_TAP1 << 1))
+                        bc->modem.par96.scram ^=
+                                (PAR96_SCRAM_TAPN << 1);
+                if (bc->modem.par96.scram & (PAR96_SCRAM_TAP1 << 2))
+                        val |= PAR96_TXBIT;
+                pp->ops->write_data(pp, val);
+                pp->ops->write_data(pp, val | PAR96_BURST);
+        }
+}
+
+/* --------------------------------------------------------------------- */
+
+static __inline__ void par96_rx(struct net_device *dev, struct baycom_state *bc)
+{
+        int i;
+        unsigned int data, mask, mask2, descx;
+        struct parport *pp = bc->pdev->port;
+
+        /*
+         * do receiver; differential decode and descramble on the fly
+         */
+        for(data = i = 0; i < PAR96_BURSTBITS; i++) {
+                bc->modem.par96.descram = (bc->modem.par96.descram << 1);
+                if (pp->ops->read_status(pp) & PAR96_RXBIT)
+                        bc->modem.par96.descram |= 1;
+                descx = bc->modem.par96.descram ^
+                        (bc->modem.par96.descram >> 1);
+                /* now the diff decoded data is inverted in descram */
+                pp->ops->write_data(pp, PAR97_POWER | PAR96_PTT);
+                descx ^= ((descx >> PAR96_DESCRAM_TAPSH1) ^
+                          (descx >> PAR96_DESCRAM_TAPSH2));
+                data >>= 1;
+                if (!(descx & 1))
+                        data |= 0x8000;
+                pp->ops->write_data(pp, PAR97_POWER | PAR96_PTT | PAR96_BURST);
+        }
+        hdlcdrv_putbits(&bc->hdrv, data);
+        /*
+         * do DCD algorithm
+         */
+        if (bc->options & BAYCOM_OPTIONS_SOFTDCD) {
+                bc->modem.par96.dcd_shreg = (bc->modem.par96.dcd_shreg >> 16)
+                        | (data << 16);
+                /* search for flags and set the dcd counter appropriately */
+                for(mask = 0x1fe00, mask2 = 0xfc00, i = 0;
+                    i < PAR96_BURSTBITS; i++, mask <<= 1, mask2 <<= 1)
+                        if ((bc->modem.par96.dcd_shreg & mask) == mask2)
+                                bc->modem.par96.dcd_count = HDLCDRV_MAXFLEN+4;
+                /* check for abort/noise sequences */
+                for(mask = 0x1fe00, mask2 = 0x1fe00, i = 0;
+                    i < PAR96_BURSTBITS; i++, mask <<= 1, mask2 <<= 1)
+                        if (((bc->modem.par96.dcd_shreg & mask) == mask2) &&
+                            (bc->modem.par96.dcd_count >= 0))
+                                bc->modem.par96.dcd_count -= HDLCDRV_MAXFLEN-10;
+                /* decrement and set the dcd variable */
+                if (bc->modem.par96.dcd_count >= 0)
+                        bc->modem.par96.dcd_count -= 2;
+                hdlcdrv_setdcd(&bc->hdrv, bc->modem.par96.dcd_count > 0);
+        } else {
+                hdlcdrv_setdcd(&bc->hdrv, !!(pp->ops->read_status(pp) & PAR96_DCD));
+        }
+}
+
+/* --------------------------------------------------------------------- */
+
+static void par96_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+        struct net_device *dev = (struct net_device *)dev_id;
+        struct baycom_state *bc = netdev_priv(dev);
+
+        baycom_int_freq(bc);
+        /*
+         * check if transmitter active
+         */
+        if (hdlcdrv_ptt(&bc->hdrv))
+                par96_tx(dev, bc);
+        else {
+                par96_rx(dev, bc);
+                if (--bc->modem.arb_divider <= 0) {
+                        bc->modem.arb_divider = 6;
+                        local_irq_enable();
+                        hdlcdrv_arbitrate(dev, &bc->hdrv);
+                }
+        }
+        local_irq_enable();
+        hdlcdrv_transmitter(dev, &bc->hdrv);
+        hdlcdrv_receiver(dev, &bc->hdrv);
+        local_irq_disable();
+}
+
+/* --------------------------------------------------------------------- */
+
+static void par96_wakeup(void *handle)
+{
+        struct net_device *dev = (struct net_device *)handle;
+        struct baycom_state *bc = netdev_priv(dev);
+
+        printk(KERN_DEBUG "baycom_par: %s: why am I being woken up?\n", dev->name);
+        if (!parport_claim(bc->pdev))
+                printk(KERN_DEBUG "baycom_par: %s: I'm broken.\n", dev->name);
+}
+
+/* --------------------------------------------------------------------- */
+
+static int par96_open(struct net_device *dev)
+{
+        struct baycom_state *bc = netdev_priv(dev);
+        struct parport *pp;
+
+        if (!dev || !bc)
+                return -ENXIO;
+        pp = parport_find_base(dev->base_addr);
+        if (!pp) {
+                printk(KERN_ERR "baycom_par: parport at 0x%lx unknown\n", dev->base_addr);
+                return -ENXIO;
+        }
+        if (pp->irq < 0) {
+                printk(KERN_ERR "baycom_par: parport at 0x%lx has no irq\n", pp->base);
+                parport_put_port(pp);
+                return -ENXIO;
+        }
+        if ((~pp->modes) & (PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
+                printk(KERN_ERR "baycom_par: parport at 0x%lx cannot be used\n", pp->base);
+                parport_put_port(pp);
+                return -ENXIO;
+        }
+        memset(&bc->modem, 0, sizeof(bc->modem));
+        bc->hdrv.par.bitrate = 9600;
+        bc->pdev = parport_register_device(pp, dev->name, NULL, par96_wakeup, 
+                                 par96_interrupt, PARPORT_DEV_EXCL, dev);
+        parport_put_port(pp);
+        if (!bc->pdev) {
+                printk(KERN_ERR "baycom_par: cannot register parport at 0x%lx\n", dev->base_addr);
+                return -ENXIO;
+        }
+        if (parport_claim(bc->pdev)) {
+                printk(KERN_ERR "baycom_par: parport at 0x%lx busy\n", pp->base);
+                parport_unregister_device(bc->pdev);
+                return -EBUSY;
+        }
+        pp = bc->pdev->port;
+        dev->irq = pp->irq;
+        pp->ops->data_forward(pp);
+        bc->hdrv.par.bitrate = 9600;
+        pp->ops->write_data(pp, PAR96_PTT | PAR97_POWER); /* switch off PTT */
+        pp->ops->enable_irq(pp);
+        printk(KERN_INFO "%s: par96 at iobase 0x%lx irq %u options 0x%x\n",
+               bc_drvname, dev->base_addr, dev->irq, bc->options);
+        return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int par96_close(struct net_device *dev)
+{
+        struct baycom_state *bc = netdev_priv(dev);
+        struct parport *pp;
+
+        if (!dev || !bc)
+                return -EINVAL;
+        pp = bc->pdev->port;
+        /* disable interrupt */
+        pp->ops->disable_irq(pp);
+        /* switch off PTT */
+        pp->ops->write_data(pp, PAR96_PTT | PAR97_POWER);
+        parport_release(bc->pdev);
+        parport_unregister_device(bc->pdev);
+        printk(KERN_INFO "%s: close par96 at iobase 0x%lx irq %u\n",
+               bc_drvname, dev->base_addr, dev->irq);
+        return 0;
+}
+
+/* --------------------------------------------------------------------- */
+/*
+ * ===================== hdlcdrv driver interface =========================
+ */
+
+static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr,
+                        struct hdlcdrv_ioctl *hi, int cmd);
+
+/* --------------------------------------------------------------------- */
+
+static struct hdlcdrv_ops par96_ops = {
+        .drvname = bc_drvname,
+        .drvinfo = bc_drvinfo,
+        .open    = par96_open,
+        .close   = par96_close,
+        .ioctl   = baycom_ioctl
+};
+
+/* --------------------------------------------------------------------- */
+
+static int baycom_setmode(struct baycom_state *bc, const char *modestr)
+{
+        if (!strncmp(modestr, "picpar", 6))
+                bc->options = 0;
+        else if (!strncmp(modestr, "par96", 5))
+                bc->options = BAYCOM_OPTIONS_SOFTDCD;
+        else
+                bc->options = !!strchr(modestr, '*');
+        return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr,
+                        struct hdlcdrv_ioctl *hi, int cmd)
+{
+        struct baycom_state *bc;
+        struct baycom_ioctl bi;
+
+        if (!dev)
+                return -EINVAL;
+
+        bc = netdev_priv(dev);
+        BUG_ON(bc->hdrv.magic != HDLCDRV_MAGIC);
+
+        if (cmd != SIOCDEVPRIVATE)
+                return -ENOIOCTLCMD;
+        switch (hi->cmd) {
+        default:
+                break;
+
+        case HDLCDRVCTL_GETMODE:
+                strcpy(hi->data.modename, bc->options ? "par96" : "picpar");
+                if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl)))
+                        return -EFAULT;
+                return 0;
+
+        case HDLCDRVCTL_SETMODE:
+                if (netif_running(dev) || !capable(CAP_NET_ADMIN))
+                        return -EACCES;
+                hi->data.modename[sizeof(hi->data.modename)-1] = '\0';
+                return baycom_setmode(bc, hi->data.modename);
+
+        case HDLCDRVCTL_MODELIST:
+                strcpy(hi->data.modename, "par96,picpar");
+                if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl)))
+                        return -EFAULT;
+                return 0;
+
+        case HDLCDRVCTL_MODEMPARMASK:
+                return HDLCDRV_PARMASK_IOBASE;
+
+        }
+
+        if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
+                return -EFAULT;
+        switch (bi.cmd) {
+        default:
+                return -ENOIOCTLCMD;
+
+#ifdef BAYCOM_DEBUG
+        case BAYCOMCTL_GETDEBUG:
+                bi.data.dbg.debug1 = bc->hdrv.ptt_keyed;
+                bi.data.dbg.debug2 = bc->debug_vals.last_intcnt;
+                bi.data.dbg.debug3 = bc->debug_vals.last_pllcorr;
+                break;
+#endif /* BAYCOM_DEBUG */
+
+        }
+        if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+                return -EFAULT;
+        return 0;
+
+}
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * command line settable parameters
+ */
+static const char *mode[NR_PORTS] = { "picpar", };
+static int iobase[NR_PORTS] = { 0x378, };
+
+module_param_array(mode, charp, NULL, 0);
+MODULE_PARM_DESC(mode, "baycom operating mode; eg. par96 or picpar");
+module_param_array(iobase, int, NULL, 0);
+MODULE_PARM_DESC(iobase, "baycom io base address");
+
+MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
+MODULE_DESCRIPTION("Baycom par96 and picpar amateur radio modem driver");
+MODULE_LICENSE("GPL");
+
+/* --------------------------------------------------------------------- */
+
+static int __init init_baycompar(void)
+{
+        int i, found = 0;
+        char set_hw = 1;
+
+        printk(bc_drvinfo);
+        /*
+         * register net devices
+         */
+        for (i = 0; i < NR_PORTS; i++) {
+                struct net_device *dev;
+                struct baycom_state *bc;
+                char ifname[IFNAMSIZ];
+
+                sprintf(ifname, "bcp%d", i);
+
+                if (!mode[i])
+                        set_hw = 0;
+                if (!set_hw)
+                        iobase[i] = 0;
+
+                dev = hdlcdrv_register(&par96_ops,
+                                       sizeof(struct baycom_state),
+                                       ifname, iobase[i], 0, 0);
+                if (IS_ERR(dev)) 
+                        break;
+
+                bc = netdev_priv(dev);
+                if (set_hw && baycom_setmode(bc, mode[i]))
+                        set_hw = 0;
+                found++;
+                baycom_device[i] = dev;
+        }
+
+        if (!found)
+                return -ENXIO;
+        return 0;
+}
+
+static void __exit cleanup_baycompar(void)
+{
+        int i;
+
+        for(i = 0; i < NR_PORTS; i++) {
+                struct net_device *dev = baycom_device[i];
+
+                if (dev)
+                        hdlcdrv_unregister(dev);
+        }
+}
+
+module_init(init_baycompar);
+module_exit(cleanup_baycompar);
+
+/* --------------------------------------------------------------------- */
+
+#ifndef MODULE
+
+/*
+ * format: baycom_par=io,mode
+ * mode: par96,picpar
+ */
+
+static int __init baycom_par_setup(char *str)
+{
+        static unsigned nr_dev;
+        int ints[2];
+
+        if (nr_dev >= NR_PORTS)
+                return 0;
+        str = get_options(str, 2, ints);
+        if (ints[0] < 1)
+                return 0;
+        mode[nr_dev] = str;
+        iobase[nr_dev] = ints[1];
+        nr_dev++;
+        return 1;
+}
+
+__setup("baycom_par=", baycom_par_setup);
+
+#endif /* MODULE */
+/* --------------------------------------------------------------------- */