[PATCH] Gianfar update and sysfs support

This seems to have gotten lost, so I'll resend.

Signed-off-by: Andy Fleming <afleming@freescale.com>

* Added sysfs support to gianfar for modifying FIFO and stashing parameters
* Updated driver to support 10 Mbit, full duplex operation
* Improved comments throughout
* Cleaned up and optimized offloading code
* Fixed a bug where rx buffers were being improperly mapped and unmapped
* (only manifested if cache-coherency was off)
* Added support for using the eTSEC exact-match MAC registers
* Bumped the version to 1.3
* Added support for distinguishing between reduced 100 and 10 Mbit modes
* Modified default coalescing values to lower latency
* Added documentation
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 152 insertions, 79 deletions

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 0f030b73cbb3..146f9513aea5 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -2,7 +2,8 @@
  * drivers/net/gianfar.c
  *
  * Gianfar Ethernet Driver
- * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
+ * This driver is designed for the non-CPM ethernet controllers
+ * on the 85xx and 83xx family of integrated processors
  * Based on 8260_io/fcc_enet.c
  *
  * Author: Andy Fleming
@@ -22,8 +23,6 @@
  *  B-V +1.62
  *
  *  Theory of operation
- *  This driver is designed for the non-CPM ethernet controllers
- *  on the 85xx and 83xx family of integrated processors
  *
  *  The driver is initialized through platform_device.  Structures which
  *  define the configuration needed by the board are defined in a
@@ -110,7 +109,7 @@
 #endif
 
 const char gfar_driver_name[] = "Gianfar Ethernet";
-const char gfar_driver_version[] = "1.2";
+const char gfar_driver_version[] = "1.3";
 
 static int gfar_enet_open(struct net_device *dev);
 static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
@@ -139,6 +138,10 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int l
 static void gfar_vlan_rx_register(struct net_device *netdev,
                                 struct vlan_group *grp);
 static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+void gfar_halt(struct net_device *dev);
+void gfar_start(struct net_device *dev);
+static void gfar_clear_exact_match(struct net_device *dev);
+static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
 
 extern struct ethtool_ops gfar_ethtool_ops;
 
@@ -146,12 +149,10 @@ MODULE_AUTHOR("Freescale Semiconductor, Inc");
 MODULE_DESCRIPTION("Gianfar Ethernet Driver");
 MODULE_LICENSE("GPL");
 
-int gfar_uses_fcb(struct gfar_private *priv)
+/* Returns 1 if incoming frames use an FCB */
+static inline int gfar_uses_fcb(struct gfar_private *priv)
 {
-        if (priv->vlan_enable || priv->rx_csum_enable)
-                return 1;
-        else
-                return 0;
+        return (priv->vlan_enable || priv->rx_csum_enable);
 }
 
 /* Set up the ethernet device structure, private data,
@@ -320,15 +321,10 @@ static int gfar_probe(struct platform_device *pdev)
         else
                 priv->padding = 0;
 
-        dev->hard_header_len += priv->padding;
-
         if (dev->features & NETIF_F_IP_CSUM)
                 dev->hard_header_len += GMAC_FCB_LEN;
 
         priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
-#ifdef CONFIG_GFAR_BUFSTASH
-        priv->rx_stash_size = STASH_LENGTH;
-#endif
         priv->tx_ring_size = DEFAULT_TX_RING_SIZE;
         priv->rx_ring_size = DEFAULT_RX_RING_SIZE;
 
@@ -350,6 +346,9 @@ static int gfar_probe(struct platform_device *pdev)
                 goto register_fail;
         }
 
+        /* Create all the sysfs files */
+        gfar_init_sysfs(dev);
+
         /* Print out the device info */
         printk(KERN_INFO DEVICE_NAME, dev->name);
         for (idx = 0; idx < 6; idx++)
@@ -357,8 +356,7 @@ static int gfar_probe(struct platform_device *pdev)
         printk("\n");
 
         /* Even more device info helps when determining which kernel */
-        /* provided which set of benchmarks.  Since this is global for all */
-        /* devices, we only print it once */
+        /* provided which set of benchmarks. */
 #ifdef CONFIG_GFAR_NAPI
         printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name);
 #else
@@ -463,19 +461,9 @@ static void init_registers(struct net_device *dev)
         /* Initialize the max receive buffer length */
         gfar_write(&priv->regs->mrblr, priv->rx_buffer_size);
 
-#ifdef CONFIG_GFAR_BUFSTASH
-        /* If we are stashing buffers, we need to set the
-         * extraction length to the size of the buffer */
-        gfar_write(&priv->regs->attreli, priv->rx_stash_size << 16);
-#endif
-
         /* Initialize the Minimum Frame Length Register */
         gfar_write(&priv->regs->minflr, MINFLR_INIT_SETTINGS);
 
-        /* Setup Attributes so that snooping is on for rx */
-        gfar_write(&priv->regs->attr, ATTR_INIT_SETTINGS);
-        gfar_write(&priv->regs->attreli, ATTRELI_INIT_SETTINGS);
-
         /* Assign the TBI an address which won't conflict with the PHYs */
         gfar_write(&priv->regs->tbipa, TBIPA_VALUE);
 }
@@ -577,8 +565,7 @@ static void free_skb_resources(struct gfar_private *priv)
                 for (i = 0; i < priv->rx_ring_size; i++) {
                         if (priv->rx_skbuff[i]) {
                                 dma_unmap_single(NULL, rxbdp->bufPtr,
-                                                priv->rx_buffer_size
-                                                + RXBUF_ALIGNMENT,
+                                                priv->rx_buffer_size,
                                                 DMA_FROM_DEVICE);
 
                                 dev_kfree_skb_any(priv->rx_skbuff[i]);
@@ -636,6 +623,7 @@ int startup_gfar(struct net_device *dev)
         struct gfar *regs = priv->regs;
         int err = 0;
         u32 rctrl = 0;
+        u32 attrs = 0;
 
         gfar_write(&regs->imask, IMASK_INIT_CLEAR);
 
@@ -795,18 +783,50 @@ int startup_gfar(struct net_device *dev)
         if (priv->rx_csum_enable)
                 rctrl |= RCTRL_CHECKSUMMING;
 
-        if (priv->extended_hash)
+        if (priv->extended_hash) {
                 rctrl |= RCTRL_EXTHASH;
 
+                gfar_clear_exact_match(dev);
+                rctrl |= RCTRL_EMEN;
+        }
+
         if (priv->vlan_enable)
                 rctrl |= RCTRL_VLAN;
 
+        if (priv->padding) {
+                rctrl &= ~RCTRL_PAL_MASK;
+                rctrl |= RCTRL_PADDING(priv->padding);
+        }
+
         /* Init rctrl based on our settings */
         gfar_write(&priv->regs->rctrl, rctrl);
 
         if (dev->features & NETIF_F_IP_CSUM)
                 gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM);
 
+        /* Set the extraction length and index */
+        attrs = ATTRELI_EL(priv->rx_stash_size) |
+                ATTRELI_EI(priv->rx_stash_index);
+
+        gfar_write(&priv->regs->attreli, attrs);
+
+        /* Start with defaults, and add stashing or locking
+         * depending on the approprate variables */
+        attrs = ATTR_INIT_SETTINGS;
+
+        if (priv->bd_stash_en)
+                attrs |= ATTR_BDSTASH;
+
+        if (priv->rx_stash_size != 0)
+                attrs |= ATTR_BUFSTASH;
+
+        gfar_write(&priv->regs->attr, attrs);
+
+        gfar_write(&priv->regs->fifo_tx_thr, priv->fifo_threshold);
+        gfar_write(&priv->regs->fifo_tx_starve, priv->fifo_starve);
+        gfar_write(&priv->regs->fifo_tx_starve_shutoff, priv->fifo_starve_off);
+
+        /* Start the controller */
         gfar_start(dev);
 
         return 0;
@@ -851,34 +871,32 @@ static int gfar_enet_open(struct net_device *dev)
         return err;
 }
 
-static struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp)
+static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp)
 {
         struct txfcb *fcb = (struct txfcb *)skb_push (skb, GMAC_FCB_LEN);
 
         memset(fcb, 0, GMAC_FCB_LEN);
 
-        /* Flag the bd so the controller looks for the FCB */
-        bdp->status |= TXBD_TOE;
-
         return fcb;
 }
 
 static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb)
 {
-        int len;
+        u8 flags = 0;
 
         /* If we're here, it's a IP packet with a TCP or UDP
          * payload.  We set it to checksum, using a pseudo-header
          * we provide
          */
-        fcb->ip = 1;
-        fcb->tup = 1;
-        fcb->ctu = 1;
-        fcb->nph = 1;
+        flags = TXFCB_DEFAULT;
 
-        /* Notify the controller what the protocol is */
-        if (skb->nh.iph->protocol == IPPROTO_UDP)
-                fcb->udp = 1;
+        /* Tell the controller what the protocol is */
+        /* And provide the already calculated phcs */
+        if (skb->nh.iph->protocol == IPPROTO_UDP) {
+                flags |= TXFCB_UDP;
+                fcb->phcs = skb->h.uh->check;
+        } else
+                fcb->phcs = skb->h.th->check;
 
         /* l3os is the distance between the start of the
          * frame (skb->data) and the start of the IP hdr.
@@ -887,17 +905,12 @@ static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb)
         fcb->l3os = (u16)(skb->nh.raw - skb->data - GMAC_FCB_LEN);
         fcb->l4os = (u16)(skb->h.raw - skb->nh.raw);
 
-        len = skb->nh.iph->tot_len - fcb->l4os;
-
-        /* Provide the pseudoheader csum */
-        fcb->phcs = ~csum_tcpudp_magic(skb->nh.iph->saddr,
-                        skb->nh.iph->daddr, len,
-                        skb->nh.iph->protocol, 0);
+        fcb->flags = flags;
 }
 
-void gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb)
+void inline gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb)
 {
-        fcb->vln = 1;
+        fcb->flags |= TXFCB_VLN;
         fcb->vlctl = vlan_tx_tag_get(skb);
 }
 
@@ -908,6 +921,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
         struct gfar_private *priv = netdev_priv(dev);
         struct txfcb *fcb = NULL;
         struct txbd8 *txbdp;
+        u16 status;
 
         /* Update transmit stats */
         priv->stats.tx_bytes += skb->len;
@@ -919,19 +933,22 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
         txbdp = priv->cur_tx;
 
         /* Clear all but the WRAP status flags */
-        txbdp->status &= TXBD_WRAP;
+        status = txbdp->status & TXBD_WRAP;
 
         /* Set up checksumming */
-        if ((dev->features & NETIF_F_IP_CSUM)
-                        && (CHECKSUM_HW == skb->ip_summed)) {
+        if (likely((dev->features & NETIF_F_IP_CSUM)
+                        && (CHECKSUM_HW == skb->ip_summed))) {
                 fcb = gfar_add_fcb(skb, txbdp);
+                status |= TXBD_TOE;
                 gfar_tx_checksum(skb, fcb);
         }
 
         if (priv->vlan_enable &&
                         unlikely(priv->vlgrp && vlan_tx_tag_present(skb))) {
-                if (NULL == fcb)
+                if (unlikely(NULL == fcb)) {
                         fcb = gfar_add_fcb(skb, txbdp);
+                        status |= TXBD_TOE;
+                }
 
                 gfar_tx_vlan(skb, fcb);
         }
@@ -949,14 +966,16 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
             (priv->skb_curtx + 1) & TX_RING_MOD_MASK(priv->tx_ring_size);
 
         /* Flag the BD as interrupt-causing */
-        txbdp->status |= TXBD_INTERRUPT;
+        status |= TXBD_INTERRUPT;
 
         /* Flag the BD as ready to go, last in frame, and  */
         /* in need of CRC */
-        txbdp->status |= (TXBD_READY | TXBD_LAST | TXBD_CRC);
+        status |= (TXBD_READY | TXBD_LAST | TXBD_CRC);
 
         dev->trans_start = jiffies;
 
+        txbdp->status = status;
+
         /* If this was the last BD in the ring, the next one */
         /* is at the beginning of the ring */
         if (txbdp->status & TXBD_WRAP)
@@ -1010,21 +1029,7 @@ static struct net_device_stats * gfar_get_stats(struct net_device *dev)
 /* Changes the mac address if the controller is not running. */
 int gfar_set_mac_address(struct net_device *dev)
 {
-        struct gfar_private *priv = netdev_priv(dev);
-        int i;
-        char tmpbuf[MAC_ADDR_LEN];
-        u32 tempval;
-
-        /* Now copy it into the mac registers backwards, cuz */
-        /* little endian is silly */
-        for (i = 0; i < MAC_ADDR_LEN; i++)
-                tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->dev_addr[i];
-
-        gfar_write(&priv->regs->macstnaddr1, *((u32 *) (tmpbuf)));
-
-        tempval = *((u32 *) (tmpbuf + 4));
-
-        gfar_write(&priv->regs->macstnaddr2, tempval);
+        gfar_set_mac_for_addr(dev, 0, dev->dev_addr);
 
         return 0;
 }
@@ -1110,7 +1115,7 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
             INCREMENTAL_BUFFER_SIZE;
 
         /* Only stop and start the controller if it isn't already
-         * stopped */
+         * stopped, and we changed something */
         if ((oldsize != tempsize) && (dev->flags & IFF_UP))
                 stop_gfar(dev);
 
@@ -1220,6 +1225,7 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs)
 
 struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
 {
+        unsigned int alignamount;
         struct gfar_private *priv = netdev_priv(dev);
         struct sk_buff *skb = NULL;
         unsigned int timeout = SKB_ALLOC_TIMEOUT;
@@ -1231,18 +1237,18 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
         if (NULL == skb)
                 return NULL;
 
+        alignamount = RXBUF_ALIGNMENT -
+                (((unsigned) skb->data) & (RXBUF_ALIGNMENT - 1));
+
         /* We need the data buffer to be aligned properly.  We will reserve
          * as many bytes as needed to align the data properly
          */
-        skb_reserve(skb,
-                    RXBUF_ALIGNMENT -
-                    (((unsigned) skb->data) & (RXBUF_ALIGNMENT - 1)));
+        skb_reserve(skb, alignamount);
 
         skb->dev = dev;
 
         bdp->bufPtr = dma_map_single(NULL, skb->data,
-                        priv->rx_buffer_size + RXBUF_ALIGNMENT,
-                        DMA_FROM_DEVICE);
+                        priv->rx_buffer_size, DMA_FROM_DEVICE);
 
         bdp->length = 0;
 
@@ -1350,7 +1356,7 @@ static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb)
         /* If valid headers were found, and valid sums
          * were verified, then we tell the kernel that no
          * checksumming is necessary.  Otherwise, it is */
-        if (fcb->cip && !fcb->eip && fcb->ctu && !fcb->etu)
+        if ((fcb->flags & RXFCB_CSUM_MASK) == (RXFCB_CIP | RXFCB_CTU))
                 skb->ip_summed = CHECKSUM_UNNECESSARY;
         else
                 skb->ip_summed = CHECKSUM_NONE;
@@ -1401,7 +1407,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
                 skb->protocol = eth_type_trans(skb, dev);
 
                 /* Send the packet up the stack */
-                if (unlikely(priv->vlgrp && fcb->vln))
+                if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN)))
                         ret = gfar_rx_vlan(skb, priv->vlgrp, fcb->vlctl);
                 else
                         ret = RECEIVE(skb);
@@ -1620,6 +1626,7 @@ static void adjust_link(struct net_device *dev)
         spin_lock_irqsave(&priv->lock, flags);
         if (phydev->link) {
                 u32 tempval = gfar_read(&regs->maccfg2);
+                u32 ecntrl = gfar_read(&regs->ecntrl);
 
                 /* Now we make sure that we can be in full duplex mode.
                  * If not, we operate in half-duplex mode. */
@@ -1644,6 +1651,13 @@ static void adjust_link(struct net_device *dev)
                         case 10:
                                 tempval =
                                     ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII);
+
+                                /* Reduced mode distinguishes
+                                 * between 10 and 100 */
+                                if (phydev->speed == SPEED_100)
+                                        ecntrl |= ECNTRL_R100;
+                                else
+                                        ecntrl &= ~(ECNTRL_R100);
                                 break;
                         default:
                                 if (netif_msg_link(priv))
@@ -1657,6 +1671,7 @@ static void adjust_link(struct net_device *dev)
                 }
 
                 gfar_write(&regs->maccfg2, tempval);
+                gfar_write(&regs->ecntrl, ecntrl);
 
                 if (!priv->oldlink) {
                         new_state = 1;
@@ -1721,6 +1736,9 @@ static void gfar_set_multi(struct net_device *dev)
                 gfar_write(&regs->gaddr6, 0xffffffff);
                 gfar_write(&regs->gaddr7, 0xffffffff);
         } else {
+                int em_num;
+                int idx;
+
                 /* zero out the hash */
                 gfar_write(&regs->igaddr0, 0x0);
                 gfar_write(&regs->igaddr1, 0x0);
@@ -1739,18 +1757,47 @@ static void gfar_set_multi(struct net_device *dev)
                 gfar_write(&regs->gaddr6, 0x0);
                 gfar_write(&regs->gaddr7, 0x0);
 
+                /* If we have extended hash tables, we need to
+                 * clear the exact match registers to prepare for
+                 * setting them */
+                if (priv->extended_hash) {
+                        em_num = GFAR_EM_NUM + 1;
+                        gfar_clear_exact_match(dev);
+                        idx = 1;
+                } else {
+                        idx = 0;
+                        em_num = 0;
+                }
+
                 if(dev->mc_count == 0)
                         return;
 
                 /* Parse the list, and set the appropriate bits */
                 for(mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
-                        gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr);
+                        if (idx < em_num) {
+                                gfar_set_mac_for_addr(dev, idx,
+                                                mc_ptr->dmi_addr);
+                                idx++;
+                        } else
+                                gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr);
                 }
         }
 
         return;
 }
 
+
+/* Clears each of the exact match registers to zero, so they
+ * don't interfere with normal reception */
+static void gfar_clear_exact_match(struct net_device *dev)
+{
+        int idx;
+        u8 zero_arr[MAC_ADDR_LEN] = {0,0,0,0,0,0};
+
+        for(idx = 1;idx < GFAR_EM_NUM + 1;idx++)
+                gfar_set_mac_for_addr(dev, idx, (u8 *)zero_arr);
+}
+
 /* Set the appropriate hash bit for the given addr */
 /* The algorithm works like so:
  * 1) Take the Destination Address (ie the multicast address), and
@@ -1781,6 +1828,32 @@ static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr)
         return;
 }
 
+
+/* There are multiple MAC Address register pairs on some controllers
+ * This function sets the numth pair to a given address
+ */
+static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr)
+{
+        struct gfar_private *priv = netdev_priv(dev);
+        int idx;
+        char tmpbuf[MAC_ADDR_LEN];
+        u32 tempval;
+        u32 *macptr = &priv->regs->macstnaddr1;
+
+        macptr += num*2;
+
+        /* Now copy it into the mac registers backwards, cuz */
+        /* little endian is silly */
+        for (idx = 0; idx < MAC_ADDR_LEN; idx++)
+                tmpbuf[MAC_ADDR_LEN - 1 - idx] = addr[idx];
+
+        gfar_write(macptr, *((u32 *) (tmpbuf)));
+
+        tempval = *((u32 *) (tmpbuf + 4));
+
+        gfar_write(macptr+1, tempval);
+}
+
 /* GFAR error interrupt handler */
 static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs)
 {