diff options
author | Pantelis Antoniou <pantelis.antoniou@gmail.com> | 2005-10-28 16:25:58 -0400 |
---|---|---|
committer | Jeff Garzik <jgarzik@pobox.com> | 2005-10-28 16:25:58 -0400 |
commit | 48257c4f168e5d040394aeca4d37b59f68e0d36b (patch) | |
tree | 7e553a6018862338d80fb5b0e4070a371a8fb001 /drivers/net/fs_enet/mii-bitbang.c | |
parent | d8840ac907c7943bc7e196b11812adfa95cb28ef (diff) |
Add fs_enet ethernet network driver, for several embedded platforms.
Diffstat (limited to 'drivers/net/fs_enet/mii-bitbang.c')
-rw-r--r-- | drivers/net/fs_enet/mii-bitbang.c | 405 |
1 files changed, 405 insertions, 0 deletions
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c new file mode 100644 index 000000000000..24a5e2e23d18 --- /dev/null +++ b/drivers/net/fs_enet/mii-bitbang.c | |||
@@ -0,0 +1,405 @@ | |||
1 | /* | ||
2 | * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. | ||
3 | * | ||
4 | * Copyright (c) 2003 Intracom S.A. | ||
5 | * by Pantelis Antoniou <panto@intracom.gr> | ||
6 | * | ||
7 | * 2005 (c) MontaVista Software, Inc. | ||
8 | * Vitaly Bordug <vbordug@ru.mvista.com> | ||
9 | * | ||
10 | * This file is licensed under the terms of the GNU General Public License | ||
11 | * version 2. This program is licensed "as is" without any warranty of any | ||
12 | * kind, whether express or implied. | ||
13 | */ | ||
14 | |||
15 | |||
16 | #include <linux/config.h> | ||
17 | #include <linux/module.h> | ||
18 | #include <linux/types.h> | ||
19 | #include <linux/kernel.h> | ||
20 | #include <linux/sched.h> | ||
21 | #include <linux/string.h> | ||
22 | #include <linux/ptrace.h> | ||
23 | #include <linux/errno.h> | ||
24 | #include <linux/ioport.h> | ||
25 | #include <linux/slab.h> | ||
26 | #include <linux/interrupt.h> | ||
27 | #include <linux/pci.h> | ||
28 | #include <linux/init.h> | ||
29 | #include <linux/delay.h> | ||
30 | #include <linux/netdevice.h> | ||
31 | #include <linux/etherdevice.h> | ||
32 | #include <linux/skbuff.h> | ||
33 | #include <linux/spinlock.h> | ||
34 | #include <linux/mii.h> | ||
35 | #include <linux/ethtool.h> | ||
36 | #include <linux/bitops.h> | ||
37 | |||
38 | #include <asm/pgtable.h> | ||
39 | #include <asm/irq.h> | ||
40 | #include <asm/uaccess.h> | ||
41 | |||
42 | #include "fs_enet.h" | ||
43 | |||
44 | #ifdef CONFIG_8xx | ||
45 | static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit) | ||
46 | { | ||
47 | immap_t *im = (immap_t *)fs_enet_immap; | ||
48 | void *dir, *dat, *ppar; | ||
49 | int adv; | ||
50 | u8 msk; | ||
51 | |||
52 | switch (port) { | ||
53 | case fsiop_porta: | ||
54 | dir = &im->im_ioport.iop_padir; | ||
55 | dat = &im->im_ioport.iop_padat; | ||
56 | ppar = &im->im_ioport.iop_papar; | ||
57 | break; | ||
58 | |||
59 | case fsiop_portb: | ||
60 | dir = &im->im_cpm.cp_pbdir; | ||
61 | dat = &im->im_cpm.cp_pbdat; | ||
62 | ppar = &im->im_cpm.cp_pbpar; | ||
63 | break; | ||
64 | |||
65 | case fsiop_portc: | ||
66 | dir = &im->im_ioport.iop_pcdir; | ||
67 | dat = &im->im_ioport.iop_pcdat; | ||
68 | ppar = &im->im_ioport.iop_pcpar; | ||
69 | break; | ||
70 | |||
71 | case fsiop_portd: | ||
72 | dir = &im->im_ioport.iop_pddir; | ||
73 | dat = &im->im_ioport.iop_pddat; | ||
74 | ppar = &im->im_ioport.iop_pdpar; | ||
75 | break; | ||
76 | |||
77 | case fsiop_porte: | ||
78 | dir = &im->im_cpm.cp_pedir; | ||
79 | dat = &im->im_cpm.cp_pedat; | ||
80 | ppar = &im->im_cpm.cp_pepar; | ||
81 | break; | ||
82 | |||
83 | default: | ||
84 | printk(KERN_ERR DRV_MODULE_NAME | ||
85 | "Illegal port value %d!\n", port); | ||
86 | return -EINVAL; | ||
87 | } | ||
88 | |||
89 | adv = bit >> 3; | ||
90 | dir = (char *)dir + adv; | ||
91 | dat = (char *)dat + adv; | ||
92 | ppar = (char *)ppar + adv; | ||
93 | |||
94 | msk = 1 << (7 - (bit & 7)); | ||
95 | if ((in_8(ppar) & msk) != 0) { | ||
96 | printk(KERN_ERR DRV_MODULE_NAME | ||
97 | "pin %d on port %d is not general purpose!\n", bit, port); | ||
98 | return -EINVAL; | ||
99 | } | ||
100 | |||
101 | *dirp = dir; | ||
102 | *datp = dat; | ||
103 | *mskp = msk; | ||
104 | |||
105 | return 0; | ||
106 | } | ||
107 | #endif | ||
108 | |||
109 | #ifdef CONFIG_8260 | ||
110 | static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit) | ||
111 | { | ||
112 | iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport; | ||
113 | void *dir, *dat, *ppar; | ||
114 | int adv; | ||
115 | u8 msk; | ||
116 | |||
117 | switch (port) { | ||
118 | case fsiop_porta: | ||
119 | dir = &io->iop_pdira; | ||
120 | dat = &io->iop_pdata; | ||
121 | ppar = &io->iop_ppara; | ||
122 | break; | ||
123 | |||
124 | case fsiop_portb: | ||
125 | dir = &io->iop_pdirb; | ||
126 | dat = &io->iop_pdatb; | ||
127 | ppar = &io->iop_pparb; | ||
128 | break; | ||
129 | |||
130 | case fsiop_portc: | ||
131 | dir = &io->iop_pdirc; | ||
132 | dat = &io->iop_pdatc; | ||
133 | ppar = &io->iop_pparc; | ||
134 | break; | ||
135 | |||
136 | case fsiop_portd: | ||
137 | dir = &io->iop_pdird; | ||
138 | dat = &io->iop_pdatd; | ||
139 | ppar = &io->iop_ppard; | ||
140 | break; | ||
141 | |||
142 | default: | ||
143 | printk(KERN_ERR DRV_MODULE_NAME | ||
144 | "Illegal port value %d!\n", port); | ||
145 | return -EINVAL; | ||
146 | } | ||
147 | |||
148 | adv = bit >> 3; | ||
149 | dir = (char *)dir + adv; | ||
150 | dat = (char *)dat + adv; | ||
151 | ppar = (char *)ppar + adv; | ||
152 | |||
153 | msk = 1 << (7 - (bit & 7)); | ||
154 | if ((in_8(ppar) & msk) != 0) { | ||
155 | printk(KERN_ERR DRV_MODULE_NAME | ||
156 | "pin %d on port %d is not general purpose!\n", bit, port); | ||
157 | return -EINVAL; | ||
158 | } | ||
159 | |||
160 | *dirp = dir; | ||
161 | *datp = dat; | ||
162 | *mskp = msk; | ||
163 | |||
164 | return 0; | ||
165 | } | ||
166 | #endif | ||
167 | |||
168 | static inline void bb_set(u8 *p, u8 m) | ||
169 | { | ||
170 | out_8(p, in_8(p) | m); | ||
171 | } | ||
172 | |||
173 | static inline void bb_clr(u8 *p, u8 m) | ||
174 | { | ||
175 | out_8(p, in_8(p) & ~m); | ||
176 | } | ||
177 | |||
178 | static inline int bb_read(u8 *p, u8 m) | ||
179 | { | ||
180 | return (in_8(p) & m) != 0; | ||
181 | } | ||
182 | |||
183 | static inline void mdio_active(struct fs_enet_mii_bus *bus) | ||
184 | { | ||
185 | bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk); | ||
186 | } | ||
187 | |||
188 | static inline void mdio_tristate(struct fs_enet_mii_bus *bus) | ||
189 | { | ||
190 | bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk); | ||
191 | } | ||
192 | |||
193 | static inline int mdio_read(struct fs_enet_mii_bus *bus) | ||
194 | { | ||
195 | return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); | ||
196 | } | ||
197 | |||
198 | static inline void mdio(struct fs_enet_mii_bus *bus, int what) | ||
199 | { | ||
200 | if (what) | ||
201 | bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); | ||
202 | else | ||
203 | bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); | ||
204 | } | ||
205 | |||
206 | static inline void mdc(struct fs_enet_mii_bus *bus, int what) | ||
207 | { | ||
208 | if (what) | ||
209 | bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk); | ||
210 | else | ||
211 | bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk); | ||
212 | } | ||
213 | |||
214 | static inline void mii_delay(struct fs_enet_mii_bus *bus) | ||
215 | { | ||
216 | udelay(bus->bus_info->i.bitbang.delay); | ||
217 | } | ||
218 | |||
219 | /* Utility to send the preamble, address, and register (common to read and write). */ | ||
220 | static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg) | ||
221 | { | ||
222 | int j; | ||
223 | |||
224 | /* | ||
225 | * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure. | ||
226 | * The IEEE spec says this is a PHY optional requirement. The AMD | ||
227 | * 79C874 requires one after power up and one after a MII communications | ||
228 | * error. This means that we are doing more preambles than we need, | ||
229 | * but it is safer and will be much more robust. | ||
230 | */ | ||
231 | |||
232 | mdio_active(bus); | ||
233 | mdio(bus, 1); | ||
234 | for (j = 0; j < 32; j++) { | ||
235 | mdc(bus, 0); | ||
236 | mii_delay(bus); | ||
237 | mdc(bus, 1); | ||
238 | mii_delay(bus); | ||
239 | } | ||
240 | |||
241 | /* send the start bit (01) and the read opcode (10) or write (10) */ | ||
242 | mdc(bus, 0); | ||
243 | mdio(bus, 0); | ||
244 | mii_delay(bus); | ||
245 | mdc(bus, 1); | ||
246 | mii_delay(bus); | ||
247 | mdc(bus, 0); | ||
248 | mdio(bus, 1); | ||
249 | mii_delay(bus); | ||
250 | mdc(bus, 1); | ||
251 | mii_delay(bus); | ||
252 | mdc(bus, 0); | ||
253 | mdio(bus, read); | ||
254 | mii_delay(bus); | ||
255 | mdc(bus, 1); | ||
256 | mii_delay(bus); | ||
257 | mdc(bus, 0); | ||
258 | mdio(bus, !read); | ||
259 | mii_delay(bus); | ||
260 | mdc(bus, 1); | ||
261 | mii_delay(bus); | ||
262 | |||
263 | /* send the PHY address */ | ||
264 | for (j = 0; j < 5; j++) { | ||
265 | mdc(bus, 0); | ||
266 | mdio(bus, (addr & 0x10) != 0); | ||
267 | mii_delay(bus); | ||
268 | mdc(bus, 1); | ||
269 | mii_delay(bus); | ||
270 | addr <<= 1; | ||
271 | } | ||
272 | |||
273 | /* send the register address */ | ||
274 | for (j = 0; j < 5; j++) { | ||
275 | mdc(bus, 0); | ||
276 | mdio(bus, (reg & 0x10) != 0); | ||
277 | mii_delay(bus); | ||
278 | mdc(bus, 1); | ||
279 | mii_delay(bus); | ||
280 | reg <<= 1; | ||
281 | } | ||
282 | } | ||
283 | |||
284 | static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) | ||
285 | { | ||
286 | u16 rdreg; | ||
287 | int ret, j; | ||
288 | u8 addr = phy_id & 0xff; | ||
289 | u8 reg = location & 0xff; | ||
290 | |||
291 | bitbang_pre(bus, 1, addr, reg); | ||
292 | |||
293 | /* tri-state our MDIO I/O pin so we can read */ | ||
294 | mdc(bus, 0); | ||
295 | mdio_tristate(bus); | ||
296 | mii_delay(bus); | ||
297 | mdc(bus, 1); | ||
298 | mii_delay(bus); | ||
299 | |||
300 | /* check the turnaround bit: the PHY should be driving it to zero */ | ||
301 | if (mdio_read(bus) != 0) { | ||
302 | /* PHY didn't drive TA low */ | ||
303 | for (j = 0; j < 32; j++) { | ||
304 | mdc(bus, 0); | ||
305 | mii_delay(bus); | ||
306 | mdc(bus, 1); | ||
307 | mii_delay(bus); | ||
308 | } | ||
309 | ret = -1; | ||
310 | goto out; | ||
311 | } | ||
312 | |||
313 | mdc(bus, 0); | ||
314 | mii_delay(bus); | ||
315 | |||
316 | /* read 16 bits of register data, MSB first */ | ||
317 | rdreg = 0; | ||
318 | for (j = 0; j < 16; j++) { | ||
319 | mdc(bus, 1); | ||
320 | mii_delay(bus); | ||
321 | rdreg <<= 1; | ||
322 | rdreg |= mdio_read(bus); | ||
323 | mdc(bus, 0); | ||
324 | mii_delay(bus); | ||
325 | } | ||
326 | |||
327 | mdc(bus, 1); | ||
328 | mii_delay(bus); | ||
329 | mdc(bus, 0); | ||
330 | mii_delay(bus); | ||
331 | mdc(bus, 1); | ||
332 | mii_delay(bus); | ||
333 | |||
334 | ret = rdreg; | ||
335 | out: | ||
336 | return ret; | ||
337 | } | ||
338 | |||
339 | static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val) | ||
340 | { | ||
341 | int j; | ||
342 | u8 addr = phy_id & 0xff; | ||
343 | u8 reg = location & 0xff; | ||
344 | u16 value = val & 0xffff; | ||
345 | |||
346 | bitbang_pre(bus, 0, addr, reg); | ||
347 | |||
348 | /* send the turnaround (10) */ | ||
349 | mdc(bus, 0); | ||
350 | mdio(bus, 1); | ||
351 | mii_delay(bus); | ||
352 | mdc(bus, 1); | ||
353 | mii_delay(bus); | ||
354 | mdc(bus, 0); | ||
355 | mdio(bus, 0); | ||
356 | mii_delay(bus); | ||
357 | mdc(bus, 1); | ||
358 | mii_delay(bus); | ||
359 | |||
360 | /* write 16 bits of register data, MSB first */ | ||
361 | for (j = 0; j < 16; j++) { | ||
362 | mdc(bus, 0); | ||
363 | mdio(bus, (value & 0x8000) != 0); | ||
364 | mii_delay(bus); | ||
365 | mdc(bus, 1); | ||
366 | mii_delay(bus); | ||
367 | value <<= 1; | ||
368 | } | ||
369 | |||
370 | /* | ||
371 | * Tri-state the MDIO line. | ||
372 | */ | ||
373 | mdio_tristate(bus); | ||
374 | mdc(bus, 0); | ||
375 | mii_delay(bus); | ||
376 | mdc(bus, 1); | ||
377 | mii_delay(bus); | ||
378 | } | ||
379 | |||
380 | int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus) | ||
381 | { | ||
382 | const struct fs_mii_bus_info *bi = bus->bus_info; | ||
383 | int r; | ||
384 | |||
385 | r = bitbang_prep_bit(&bus->bitbang.mdio_dir, | ||
386 | &bus->bitbang.mdio_dat, | ||
387 | &bus->bitbang.mdio_msk, | ||
388 | bi->i.bitbang.mdio_port, | ||
389 | bi->i.bitbang.mdio_bit); | ||
390 | if (r != 0) | ||
391 | return r; | ||
392 | |||
393 | r = bitbang_prep_bit(&bus->bitbang.mdc_dir, | ||
394 | &bus->bitbang.mdc_dat, | ||
395 | &bus->bitbang.mdc_msk, | ||
396 | bi->i.bitbang.mdc_port, | ||
397 | bi->i.bitbang.mdc_bit); | ||
398 | if (r != 0) | ||
399 | return r; | ||
400 | |||
401 | bus->mii_read = mii_read; | ||
402 | bus->mii_write = mii_write; | ||
403 | |||
404 | return 0; | ||
405 | } | ||