ethernet: Convert ETHER_ADDR_LEN uses to ETH_ALEN

Reduce the number of #defines, use the normal #define from if_ether.h

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 files changed, 16 insertions, 19 deletions

diff --git a/drivers/net/ethernet/8390/8390.h b/drivers/net/ethernet/8390/8390.h
index 58a12e4c78f9..ef325ffa1b5a 100644
--- a/drivers/net/ethernet/8390/8390.h
+++ b/drivers/net/ethernet/8390/8390.h
@@ -14,8 +14,6 @@
 
 #define TX_PAGES 12     /* Two Tx slots */
 
-#define ETHER_ADDR_LEN 6
-
 /* The 8390 specific per-packet-header format. */
 struct e8390_pkt_hdr {
   unsigned char status; /* status */
diff --git a/drivers/net/ethernet/8390/apne.c b/drivers/net/ethernet/8390/apne.c
index 547737340cbb..3ad5d2f9a49c 100644
--- a/drivers/net/ethernet/8390/apne.c
+++ b/drivers/net/ethernet/8390/apne.c
@@ -318,7 +318,7 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr)
     i = request_irq(dev->irq, apne_interrupt, IRQF_SHARED, DRV_NAME, dev);
     if (i) return i;
 
-    for(i = 0; i < ETHER_ADDR_LEN; i++)
+    for (i = 0; i < ETH_ALEN; i++)
         dev->dev_addr[i] = SA_prom[i];
 
     printk(" %pM\n", dev->dev_addr);
diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
index e9f8432f55b4..2a3b8c2676bd 100644
--- a/drivers/net/ethernet/8390/ax88796.c
+++ b/drivers/net/ethernet/8390/ax88796.c
@@ -735,15 +735,14 @@ static int ax_init_dev(struct net_device *dev)
         if (ax->plat->flags & AXFLG_MAC_FROMDEV) {
                 ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
                         ei_local->mem + E8390_CMD); /* 0x61 */
-                for (i = 0; i < ETHER_ADDR_LEN; i++)
+                for (i = 0; i < ETH_ALEN; i++)
                         dev->dev_addr[i] =
                                 ei_inb(ioaddr + EN1_PHYS_SHIFT(i));
         }
 
         if ((ax->plat->flags & AXFLG_MAC_FROMPLATFORM) &&
             ax->plat->mac_addr)
-                memcpy(dev->dev_addr, ax->plat->mac_addr,
-                       ETHER_ADDR_LEN);
+                memcpy(dev->dev_addr, ax->plat->mac_addr, ETH_ALEN);
 
         ax_reset_8390(dev);
 
diff --git a/drivers/net/ethernet/8390/es3210.c b/drivers/net/ethernet/8390/es3210.c
index 7a09575ecff0..6428f9e7a554 100644
--- a/drivers/net/ethernet/8390/es3210.c
+++ b/drivers/net/ethernet/8390/es3210.c
@@ -195,7 +195,7 @@ static int __init es_probe1(struct net_device *dev, int ioaddr)
                 goto out;
         }
 
-        for (i = 0; i < ETHER_ADDR_LEN ; i++)
+        for (i = 0; i < ETH_ALEN ; i++)
                 dev->dev_addr[i] = inb(ioaddr + ES_SA_PROM + i);
 
 /*      Check the Racal vendor ID as well. */
diff --git a/drivers/net/ethernet/8390/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c
index eeac843dcd2d..d42938b6b596 100644
--- a/drivers/net/ethernet/8390/hp-plus.c
+++ b/drivers/net/ethernet/8390/hp-plus.c
@@ -202,7 +202,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr)
         /* Retrieve and checksum the station address. */
         outw(MAC_Page, ioaddr + HP_PAGING);
 
-        for(i = 0; i < ETHER_ADDR_LEN; i++) {
+        for(i = 0; i < ETH_ALEN; i++) {
                 unsigned char inval = inb(ioaddr + 8 + i);
                 dev->dev_addr[i] = inval;
                 checksum += inval;
diff --git a/drivers/net/ethernet/8390/hp.c b/drivers/net/ethernet/8390/hp.c
index 18564d4a7c04..113f1e075a26 100644
--- a/drivers/net/ethernet/8390/hp.c
+++ b/drivers/net/ethernet/8390/hp.c
@@ -156,7 +156,7 @@ static int __init hp_probe1(struct net_device *dev, int ioaddr)
 
         printk("%s: %s (ID %02x) at %#3x,", dev->name, name, board_id, ioaddr);
 
-        for(i = 0; i < ETHER_ADDR_LEN; i++)
+        for(i = 0; i < ETH_ALEN; i++)
                 dev->dev_addr[i] = inb(ioaddr + i);
 
         printk(" %pM", dev->dev_addr);
diff --git a/drivers/net/ethernet/8390/hydra.c b/drivers/net/ethernet/8390/hydra.c
index 3dac937a67c4..5370c884620b 100644
--- a/drivers/net/ethernet/8390/hydra.c
+++ b/drivers/net/ethernet/8390/hydra.c
@@ -129,7 +129,7 @@ static int __devinit hydra_init(struct zorro_dev *z)
     if (!dev)
         return -ENOMEM;
 
-    for(j = 0; j < ETHER_ADDR_LEN; j++)
+    for (j = 0; j < ETH_ALEN; j++)
         dev->dev_addr[j] = *((u8 *)(board + HYDRA_ADDRPROM + 2*j));
 
     /* We must set the 8390 for word mode. */
diff --git a/drivers/net/ethernet/8390/lne390.c b/drivers/net/ethernet/8390/lne390.c
index f9888d20177b..69490ae018ea 100644
--- a/drivers/net/ethernet/8390/lne390.c
+++ b/drivers/net/ethernet/8390/lne390.c
@@ -191,14 +191,14 @@ static int __init lne390_probe1(struct net_device *dev, int ioaddr)
                 || inb(ioaddr + LNE390_SA_PROM + 1) != LNE390_ADDR1
                 || inb(ioaddr + LNE390_SA_PROM + 2) != LNE390_ADDR2 ) {
                 printk("lne390.c: card not found");
-                for(i = 0; i < ETHER_ADDR_LEN; i++)
+                for (i = 0; i < ETH_ALEN; i++)
                         printk(" %02x", inb(ioaddr + LNE390_SA_PROM + i));
                 printk(" (invalid prefix).\n");
                 return -ENODEV;
         }
 #endif
 
-        for(i = 0; i < ETHER_ADDR_LEN; i++)
+        for (i = 0; i < ETH_ALEN; i++)
                 dev->dev_addr[i] = inb(ioaddr + LNE390_SA_PROM + i);
         printk("lne390.c: LNE390%X in EISA slot %d, address %pM.\n",
                0xa+revision, ioaddr/0x1000, dev->dev_addr);
diff --git a/drivers/net/ethernet/8390/ne-h8300.c b/drivers/net/ethernet/8390/ne-h8300.c
index cd36a6a5f408..9b9c77d5a65c 100644
--- a/drivers/net/ethernet/8390/ne-h8300.c
+++ b/drivers/net/ethernet/8390/ne-h8300.c
@@ -312,7 +312,7 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
 
         dev->base_addr = ioaddr;
 
-        for(i = 0; i < ETHER_ADDR_LEN; i++)
+        for (i = 0; i < ETH_ALEN; i++)
                 dev->dev_addr[i] = SA_prom[i];
         printk(" %pM\n", dev->dev_addr);
 
diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c
index 1063093b3afc..f92ea2a65a57 100644
--- a/drivers/net/ethernet/8390/ne.c
+++ b/drivers/net/ethernet/8390/ne.c
@@ -503,12 +503,12 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
 #ifdef CONFIG_PLAT_MAPPI
         outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
                 ioaddr + E8390_CMD); /* 0x61 */
-        for (i = 0 ; i < ETHER_ADDR_LEN ; i++) {
+        for (i = 0; i < ETH_ALEN; i++) {
                 dev->dev_addr[i] = SA_prom[i]
                         = inb_p(ioaddr + EN1_PHYS_SHIFT(i));
         }
 #else
-        for(i = 0; i < ETHER_ADDR_LEN; i++) {
+        for (i = 0; i < ETH_ALEN; i++) {
                 dev->dev_addr[i] = SA_prom[i];
         }
 #endif
diff --git a/drivers/net/ethernet/8390/ne2.c b/drivers/net/ethernet/8390/ne2.c
index 70cdc6996342..922b32036c63 100644
--- a/drivers/net/ethernet/8390/ne2.c
+++ b/drivers/net/ethernet/8390/ne2.c
@@ -460,7 +460,7 @@ static int __init ne2_probe1(struct net_device *dev, int slot)
 
         dev->base_addr = base_addr;
 
-        for(i = 0; i < ETHER_ADDR_LEN; i++)
+        for (i = 0; i < ETH_ALEN; i++)
                 dev->dev_addr[i] = SA_prom[i];
 
         printk(" %pM\n", dev->dev_addr);
diff --git a/drivers/net/ethernet/8390/ne3210.c b/drivers/net/ethernet/8390/ne3210.c
index 243ed2aee88e..2a3e8057feae 100644
--- a/drivers/net/ethernet/8390/ne3210.c
+++ b/drivers/net/ethernet/8390/ne3210.c
@@ -125,7 +125,7 @@ static int __init ne3210_eisa_probe (struct device *device)
 #endif
 
         port_index = inb(ioaddr + NE3210_CFG2) >> 6;
-        for(i = 0; i < ETHER_ADDR_LEN; i++)
+        for (i = 0; i < ETH_ALEN; i++)
                 dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i);
         printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr: %pM.\n",
                 edev->slot, ifmap[port_index], dev->dev_addr);
diff --git a/drivers/net/ethernet/8390/stnic.c b/drivers/net/ethernet/8390/stnic.c
index d85f0a84bc7b..3b903759980a 100644
--- a/drivers/net/ethernet/8390/stnic.c
+++ b/drivers/net/ethernet/8390/stnic.c
@@ -114,7 +114,7 @@ static int __init stnic_probe(void)
 #ifdef CONFIG_SH_STANDARD_BIOS
   sh_bios_get_node_addr (stnic_eadr);
 #endif
-  for (i = 0; i < ETHER_ADDR_LEN; i++)
+  for (i = 0; i < ETH_ALEN; i++)
     dev->dev_addr[i] = stnic_eadr[i];
 
   /* Set the base address to point to the NIC, not the "real" base! */
diff --git a/drivers/net/ethernet/8390/zorro8390.c b/drivers/net/ethernet/8390/zorro8390.c
index 3aa9fe9999b5..bcd27323b203 100644
--- a/drivers/net/ethernet/8390/zorro8390.c
+++ b/drivers/net/ethernet/8390/zorro8390.c
@@ -365,7 +365,7 @@ static int __devinit zorro8390_init(struct net_device *dev,
         if (i)
                 return i;
 
-        for (i = 0; i < ETHER_ADDR_LEN; i++)
+        for (i = 0; i < ETH_ALEN; i++)
                 dev->dev_addr[i] = SA_prom[i];
 
         pr_debug("Found ethernet address: %pM\n", dev->dev_addr);