e1000e: add custom set_d[0|3]_lplu_state function pointer for 82574

82574 needs to configure Low Power Link Up (or LPLU) differently than
the other parts in the 8257x family supported by the driver.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 56 insertions, 0 deletions

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 11a273e4ba23..cb6c7b1c1fb8 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -78,6 +78,8 @@ static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
 static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
 static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
 static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
+static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active);
+static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active);
 
 /**
  *  e1000_init_phy_params_82571 - Init PHY func ptrs.
@@ -113,6 +115,8 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
                 phy->type                = e1000_phy_bm;
                 phy->ops.acquire = e1000_get_hw_semaphore_82574;
                 phy->ops.release = e1000_put_hw_semaphore_82574;
+                phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;
+                phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574;
                 break;
         default:
                 return -E1000_ERR_PHY;
@@ -656,6 +660,58 @@ static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state
+ *  @hw: pointer to the HW structure
+ *  @active: true to enable LPLU, false to disable
+ *
+ *  Sets the LPLU D0 state according to the active flag.
+ *  LPLU will not be activated unless the
+ *  device autonegotiation advertisement meets standards of
+ *  either 10 or 10/100 or 10/100/1000 at all duplexes.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active)
+{
+        u16 data = er32(POEMB);
+
+        if (active)
+                data |= E1000_PHY_CTRL_D0A_LPLU;
+        else
+                data &= ~E1000_PHY_CTRL_D0A_LPLU;
+
+        ew32(POEMB, data);
+        return 0;
+}
+
+/**
+ *  e1000_set_d3_lplu_state_82574 - Sets low power link up state for D3
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  The low power link up (lplu) state is set to the power management level D3
+ *  when active is true, else clear lplu for D3. LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.
+ **/
+static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active)
+{
+        u16 data = er32(POEMB);
+
+        if (!active) {
+                data &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+        } else if ((hw->phy.autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+                   (hw->phy.autoneg_advertised == E1000_ALL_NOT_GIG) ||
+                   (hw->phy.autoneg_advertised == E1000_ALL_10_SPEED)) {
+                data |= E1000_PHY_CTRL_NOND0A_LPLU;
+        }
+
+        ew32(POEMB, data);
+        return 0;
+}
+
+/**
  *  e1000_acquire_nvm_82571 - Request for access to the EEPROM
  *  @hw: pointer to the HW structure
  *