e1000: delete non NAPI code from the driver

Compile-tested only.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 13 insertions, 138 deletions

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index b2c3e4cc0cb4..190352c6216e 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -31,12 +31,7 @@
 
 char e1000_driver_name[] = "e1000";
 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#ifndef CONFIG_E1000_NAPI
-#define DRIVERNAPI
-#else
-#define DRIVERNAPI "-NAPI"
-#endif
-#define DRV_VERSION "7.3.20-k2"DRIVERNAPI
+#define DRV_VERSION "7.3.20-k3-NAPI"
 const char e1000_driver_version[] = DRV_VERSION;
 static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -138,7 +133,6 @@ static irqreturn_t e1000_intr(int irq, void *data);
 static irqreturn_t e1000_intr_msi(int irq, void *data);
 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
                                struct e1000_tx_ring *tx_ring);
-#ifdef CONFIG_E1000_NAPI
 static int e1000_clean(struct napi_struct *napi, int budget);
 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
                                struct e1000_rx_ring *rx_ring,
@@ -146,12 +140,6 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
                                   struct e1000_rx_ring *rx_ring,
                                   int *work_done, int work_to_do);
-#else
-static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
-                               struct e1000_rx_ring *rx_ring);
-static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
-                                  struct e1000_rx_ring *rx_ring);
-#endif
 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
                                    struct e1000_rx_ring *rx_ring,
                                    int cleaned_count);
@@ -512,9 +500,8 @@ int e1000_up(struct e1000_adapter *adapter)
 
         clear_bit(__E1000_DOWN, &adapter->flags);
 
-#ifdef CONFIG_E1000_NAPI
         napi_enable(&adapter->napi);
-#endif
+
         e1000_irq_enable(adapter);
 
         /* fire a link change interrupt to start the watchdog */
@@ -602,9 +589,8 @@ void e1000_down(struct e1000_adapter *adapter)
          * reschedule our watchdog timer */
         set_bit(__E1000_DOWN, &adapter->flags);
 
-#ifdef CONFIG_E1000_NAPI
         napi_disable(&adapter->napi);
-#endif
+
         e1000_irq_disable(adapter);
 
         del_timer_sync(&adapter->tx_fifo_stall_timer);
@@ -966,9 +952,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
         e1000_set_ethtool_ops(netdev);
         netdev->tx_timeout = &e1000_tx_timeout;
         netdev->watchdog_timeo = 5 * HZ;
-#ifdef CONFIG_E1000_NAPI
         netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
-#endif
         netdev->vlan_rx_register = e1000_vlan_rx_register;
         netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
         netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
@@ -1207,16 +1191,12 @@ err_eeprom:
         if (hw->flash_address)
                 iounmap(hw->flash_address);
 err_flashmap:
-#ifdef CONFIG_E1000_NAPI
         for (i = 0; i < adapter->num_rx_queues; i++)
                 dev_put(&adapter->polling_netdev[i]);
-#endif
 
         kfree(adapter->tx_ring);
         kfree(adapter->rx_ring);
-#ifdef CONFIG_E1000_NAPI
         kfree(adapter->polling_netdev);
-#endif
 err_sw_init:
         iounmap(hw->hw_addr);
 err_ioremap:
@@ -1244,9 +1224,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
         struct net_device *netdev = pci_get_drvdata(pdev);
         struct e1000_adapter *adapter = netdev_priv(netdev);
         struct e1000_hw *hw = &adapter->hw;
-#ifdef CONFIG_E1000_NAPI
         int i;
-#endif
 
         cancel_work_sync(&adapter->reset_task);
 
@@ -1256,10 +1234,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
          * would have already happened in close and is redundant. */
         e1000_release_hw_control(adapter);
 
-#ifdef CONFIG_E1000_NAPI
         for (i = 0; i < adapter->num_rx_queues; i++)
                 dev_put(&adapter->polling_netdev[i]);
-#endif
 
         unregister_netdev(netdev);
 
@@ -1268,9 +1244,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 
         kfree(adapter->tx_ring);
         kfree(adapter->rx_ring);
-#ifdef CONFIG_E1000_NAPI
         kfree(adapter->polling_netdev);
-#endif
 
         iounmap(hw->hw_addr);
         if (hw->flash_address)
@@ -1296,9 +1270,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
         struct e1000_hw *hw = &adapter->hw;
         struct net_device *netdev = adapter->netdev;
         struct pci_dev *pdev = adapter->pdev;
-#ifdef CONFIG_E1000_NAPI
         int i;
-#endif
 
         /* PCI config space info */
 
@@ -1356,14 +1328,12 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
                 return -ENOMEM;
         }
 
-#ifdef CONFIG_E1000_NAPI
         for (i = 0; i < adapter->num_rx_queues; i++) {
                 adapter->polling_netdev[i].priv = adapter;
                 dev_hold(&adapter->polling_netdev[i]);
                 set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
         }
         spin_lock_init(&adapter->tx_queue_lock);
-#endif
 
         /* Explicitly disable IRQ since the NIC can be in any state. */
         e1000_irq_disable(adapter);
@@ -1398,7 +1368,6 @@ static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
                 return -ENOMEM;
         }
 
-#ifdef CONFIG_E1000_NAPI
         adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
                                           sizeof(struct net_device),
                                           GFP_KERNEL);
@@ -1407,7 +1376,6 @@ static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
                 kfree(adapter->rx_ring);
                 return -ENOMEM;
         }
-#endif
 
         return E1000_SUCCESS;
 }
@@ -1472,9 +1440,7 @@ static int e1000_open(struct net_device *netdev)
         /* From here on the code is the same as e1000_up() */
         clear_bit(__E1000_DOWN, &adapter->flags);
 
-#ifdef CONFIG_E1000_NAPI
         napi_enable(&adapter->napi);
-#endif
 
         e1000_irq_enable(adapter);
 
@@ -2069,11 +2035,9 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
                 ctrl_ext = er32(CTRL_EXT);
                 /* Reset delay timers after every interrupt */
                 ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
-#ifdef CONFIG_E1000_NAPI
                 /* Auto-Mask interrupts upon ICR access */
                 ctrl_ext |= E1000_CTRL_EXT_IAME;
                 ew32(IAM, 0xffffffff);
-#endif
                 ew32(CTRL_EXT, ctrl_ext);
                 E1000_WRITE_FLUSH();
         }
@@ -3777,9 +3741,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
         struct net_device *netdev = data;
         struct e1000_adapter *adapter = netdev_priv(netdev);
         struct e1000_hw *hw = &adapter->hw;
-#ifndef CONFIG_E1000_NAPI
-        int i;
-#endif
         u32 icr = er32(ICR);
 
         /* in NAPI mode read ICR disables interrupts using IAM */
@@ -3800,7 +3761,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
         }
 
-#ifdef CONFIG_E1000_NAPI
         if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
                 adapter->total_tx_bytes = 0;
                 adapter->total_tx_packets = 0;
@@ -3809,20 +3769,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
                 __netif_rx_schedule(netdev, &adapter->napi);
         } else
                 e1000_irq_enable(adapter);
-#else
-        adapter->total_tx_bytes = 0;
-        adapter->total_rx_bytes = 0;
-        adapter->total_tx_packets = 0;
-        adapter->total_rx_packets = 0;
-
-        for (i = 0; i < E1000_MAX_INTR; i++)
-                if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
-                   !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
-                        break;
-
-        if (likely(adapter->itr_setting & 3))
-                e1000_set_itr(adapter);
-#endif
 
         return IRQ_HANDLED;
 }
@@ -3839,13 +3785,10 @@ static irqreturn_t e1000_intr(int irq, void *data)
         struct e1000_adapter *adapter = netdev_priv(netdev);
         struct e1000_hw *hw = &adapter->hw;
         u32 rctl, icr = er32(ICR);
-#ifndef CONFIG_E1000_NAPI
-        int i;
-#endif
+
         if (unlikely(!icr))
                 return IRQ_NONE;  /* Not our interrupt */
 
-#ifdef CONFIG_E1000_NAPI
         /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
          * not set, then the adapter didn't send an interrupt */
         if (unlikely(hw->mac_type >= e1000_82571 &&
@@ -3854,7 +3797,6 @@ static irqreturn_t e1000_intr(int irq, void *data)
 
         /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked.  No
          * need for the IMC write */
-#endif
 
         if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
                 hw->get_link_status = 1;
@@ -3874,7 +3816,6 @@ static irqreturn_t e1000_intr(int irq, void *data)
                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
         }
 
-#ifdef CONFIG_E1000_NAPI
         if (unlikely(hw->mac_type < e1000_82571)) {
                 /* disable interrupts, without the synchronize_irq bit */
                 ew32(IMC, ~0);
@@ -3890,46 +3831,14 @@ static irqreturn_t e1000_intr(int irq, void *data)
                 /* this really should not happen! if it does it is basically a
                  * bug, but not a hard error, so enable ints and continue */
                 e1000_irq_enable(adapter);
-#else
-        /* Writing IMC and IMS is needed for 82547.
-         * Due to Hub Link bus being occupied, an interrupt
-         * de-assertion message is not able to be sent.
-         * When an interrupt assertion message is generated later,
-         * two messages are re-ordered and sent out.
-         * That causes APIC to think 82547 is in de-assertion
-         * state, while 82547 is in assertion state, resulting
-         * in dead lock. Writing IMC forces 82547 into
-         * de-assertion state.
-         */
-        if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
-                ew32(IMC, ~0);
-
-        adapter->total_tx_bytes = 0;
-        adapter->total_rx_bytes = 0;
-        adapter->total_tx_packets = 0;
-        adapter->total_rx_packets = 0;
-
-        for (i = 0; i < E1000_MAX_INTR; i++)
-                if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
-                   !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
-                        break;
 
-        if (likely(adapter->itr_setting & 3))
-                e1000_set_itr(adapter);
-
-        if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
-                e1000_irq_enable(adapter);
-
-#endif
         return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_E1000_NAPI
 /**
  * e1000_clean - NAPI Rx polling callback
  * @adapter: board private structure
  **/
-
 static int e1000_clean(struct napi_struct *napi, int budget)
 {
         struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
@@ -3966,12 +3875,10 @@ static int e1000_clean(struct napi_struct *napi, int budget)
         return work_done;
 }
 
-#endif
 /**
  * e1000_clean_tx_irq - Reclaim resources after transmit completes
  * @adapter: board private structure
  **/
-
 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
                                struct e1000_tx_ring *tx_ring)
 {
@@ -3980,9 +3887,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
         struct e1000_tx_desc *tx_desc, *eop_desc;
         struct e1000_buffer *buffer_info;
         unsigned int i, eop;
-#ifdef CONFIG_E1000_NAPI
         unsigned int count = 0;
-#endif
         bool cleaned = false;
         unsigned int total_tx_bytes=0, total_tx_packets=0;
 
@@ -4014,11 +3919,10 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 
                 eop = tx_ring->buffer_info[i].next_to_watch;
                 eop_desc = E1000_TX_DESC(*tx_ring, eop);
-#ifdef CONFIG_E1000_NAPI
 #define E1000_TX_WEIGHT 64
                 /* weight of a sort for tx, to avoid endless transmit cleanup */
-                if (count++ == E1000_TX_WEIGHT) break;
-#endif
+                if (count++ == E1000_TX_WEIGHT)
+                        break;
         }
 
         tx_ring->next_to_clean = i;
@@ -4131,14 +4035,9 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
  * e1000_clean_rx_irq - Send received data up the network stack; legacy
  * @adapter: board private structure
  **/
-#ifdef CONFIG_E1000_NAPI
 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
                                struct e1000_rx_ring *rx_ring,
                                int *work_done, int work_to_do)
-#else
-static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
-                               struct e1000_rx_ring *rx_ring)
-#endif
 {
         struct e1000_hw *hw = &adapter->hw;
         struct net_device *netdev = adapter->netdev;
@@ -4161,11 +4060,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
                 struct sk_buff *skb;
                 u8 status;
 
-#ifdef CONFIG_E1000_NAPI
                 if (*work_done >= work_to_do)
                         break;
                 (*work_done)++;
-#endif
+
                 status = rx_desc->status;
                 skb = buffer_info->skb;
                 buffer_info->skb = NULL;
@@ -4251,7 +4149,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
                                   le16_to_cpu(rx_desc->csum), skb);
 
                 skb->protocol = eth_type_trans(skb, netdev);
-#ifdef CONFIG_E1000_NAPI
+
                 if (unlikely(adapter->vlgrp &&
                             (status & E1000_RXD_STAT_VP))) {
                         vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
@@ -4259,15 +4157,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
                 } else {
                         netif_receive_skb(skb);
                 }
-#else /* CONFIG_E1000_NAPI */
-                if (unlikely(adapter->vlgrp &&
-                            (status & E1000_RXD_STAT_VP))) {
-                        vlan_hwaccel_rx(skb, adapter->vlgrp,
-                                        le16_to_cpu(rx_desc->special));
-                } else {
-                        netif_rx(skb);
-                }
-#endif /* CONFIG_E1000_NAPI */
+
                 netdev->last_rx = jiffies;
 
 next_desc:
@@ -4301,14 +4191,9 @@ next_desc:
  * @adapter: board private structure
  **/
 
-#ifdef CONFIG_E1000_NAPI
 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
                                   struct e1000_rx_ring *rx_ring,
                                   int *work_done, int work_to_do)
-#else
-static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
-                                  struct e1000_rx_ring *rx_ring)
-#endif
 {
         union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
         struct net_device *netdev = adapter->netdev;
@@ -4331,11 +4216,11 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
         while (staterr & E1000_RXD_STAT_DD) {
                 ps_page = &rx_ring->ps_page[i];
                 ps_page_dma = &rx_ring->ps_page_dma[i];
-#ifdef CONFIG_E1000_NAPI
+
                 if (unlikely(*work_done >= work_to_do))
                         break;
                 (*work_done)++;
-#endif
+
                 skb = buffer_info->skb;
 
                 /* in the packet split case this is header only */
@@ -4437,21 +4322,14 @@ copydone:
                 if (likely(rx_desc->wb.upper.header_status &
                            cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
                         adapter->rx_hdr_split++;
-#ifdef CONFIG_E1000_NAPI
+
                 if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
                         vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
                                 le16_to_cpu(rx_desc->wb.middle.vlan));
                 } else {
                         netif_receive_skb(skb);
                 }
-#else /* CONFIG_E1000_NAPI */
-                if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
-                        vlan_hwaccel_rx(skb, adapter->vlgrp,
-                                le16_to_cpu(rx_desc->wb.middle.vlan));
-                } else {
-                        netif_rx(skb);
-                }
-#endif /* CONFIG_E1000_NAPI */
+
                 netdev->last_rx = jiffies;
 
 next_desc:
@@ -5218,9 +5096,6 @@ static void e1000_netpoll(struct net_device *netdev)
 
         disable_irq(adapter->pdev->irq);
         e1000_intr(adapter->pdev->irq, netdev);
-#ifndef CONFIG_E1000_NAPI
-        adapter->clean_rx(adapter, adapter->rx_ring);
-#endif
         enable_irq(adapter->pdev->irq);
 }
 #endif